journal article·2015-12

Influence of nano-sized La2O3 addition on the sintering behavior and mechanical properties of WC–La2O3 composites

Xiaoyong Ren, Zhijian Peng, Chengbiao Wang, Hezhuo Miao

Ceramics International· Volume 41· Issue 10
Publisher page

Abstract

Abstract This work explores the addition effect of nano-sized La 2 O 3 powder (0–7 wt%) on the sintering behavior, microstructure and mechanical properties of WC–La 2 O 3 composites prepared by spark plasma sintering at 1600 °C under a uniaxial pressure of 50 MPa. The results indicated that when the content of La 2 O 3 increased from 0 to 7 wt%, both the onset and termination temperatures for sample densification were delayed. The onset temperature increased from 850 to 975 °C and the termination temperature raised from 1400 to 1600 °C, respectively. The relative density of the samples raised from 96% (for pure WC) to 97.5% (for the composites with 3–7 wt% La 2 O 3 ). The added La 2 O 3 could suppress the growth of WC grains and inhibit the formation of triangle prism shaped WC grains. However, with more La 2 O 3 (more than 5 wt% in this work), the agglomeration of La 2 O 3 became serious. With the increase in La 2 O 3 content, the Vickers hardness and flexural strength of the samples initially increased and then decreased, reaching the maximum of 2100 HV 10 with 3 wt% La 2 O 3 and 1300 MPa with 1 wt% La 2 O 3 , respectively. However, the Palmqvist indentation fracture toughness gradually decreased from 7.5 to 5.5 MPa m 1/2 when the content of La 2 O 3 increased from 0 to 7 wt%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Materials science of cemented carbides – an overview10.1016/S0261-3069(01)00007-3 ↗
2. A review of cemented carbides for rock drilling: an old but still tough challenge in geo-engineering10.1016/j.ijrmhm.2013.01.003 ↗
3. Microstructure/property relationships in the cavitation erosion of tungsten carbide-cobalt10.1016/S0043-1648(99)00201-X ↗
4. Microstructure and abrasive wear of binderless carbides10.1111/j.1151-2916.2000.tb01580.x ↗
5. Properties of ultra-fine grain binderless cemented carbide ‘RCCFN’10.1016/0263-4368(95)92676-B ↗
6. Tribological properties of a binderless carbide10.1016/S0043-1648(99)00140-4 ↗
7. Grain growth during sintering of tungsten carbide ceramics10.1016/j.ijrmhm.2014.01.001 ↗
8. The effect of consolidation parameters on the mechanical properties of binderless tungsten carbide10.1016/j.ijrmhm.2010.10.006 ↗
9. Bulk ultrafine binderless WC prepared by spark plasma sintering10.1016/j.scriptamat.2005.10.014 ↗
10. Microstructures of binderless tungsten carbides sintered by spark plasma sintering process10.1016/S0921-5093(03)00151-5 ↗
11. Reactive spark plasma sintering of binderless WC ceramics at 1500°C10.1016/j.ijrmhm.2013.10.013 ↗
12. Sparking plasma sintering of nanometric tungsten carbide10.1016/j.ijrmhm.2008.06.004 ↗
13. Rapid sintering process and mechanical properties of binderless ultra fine tungsten carbide10.1016/j.msea.2006.07.127 ↗
14. Influence and effectivity of VC and Cr3C2 grain growth inhibitors on sintering of binderless tungsten carbide10.1016/j.ijrmhm.2011.11.006 ↗
15. Research and development of rare-earth cemented carbides10.1016/S0263-4368(01)00018-X ↗
16. Study on rare-earth doped cemented carbides in China10.1016/j.ijrmhm.2008.10.002 ↗
17. Effects of LaB6 addition on the microstructure and mechanical properties of ultrafine grained WC–10Co alloys10.1016/j.jallcom.2010.09.202 ↗
18. Effect of La containing phases on microscopic wear characteristics and residual stress of WC–Co cemented carbide10.1016/j.ijrmhm.2013.01.007 ↗
19. Long-range migration behavior of rare earth additives in WC–Co cemented carbides10.1016/j.ijrmhm.2014.04.020 ↗
20. Effect of rare earth elements on the consolidation behavior and microstructure of tungsten alloys10.1016/j.ijrmhm.2014.07.014 ↗
21. Micro characteristics of binder phases in WC–Co cemented carbides with Cr-V and Cr-V-RE additives10.1016/j.ijrmhm.2012.08.017 ↗
22. Application of rare earth elements in cemented carbide inserts, drawing dies and mining tools10.1016/0921-5093(96)10130-1 ↗
23. Characterization and preparation of ultra-fine grained WC–Co alloys with minor La-additions10.1016/j.ijrmhm.2011.12.011 ↗
24. Indentation fracture of WC–Co cermets10.1007/BF00555296 ↗
25. The sintering kinetics of ultrafine tungsten carbide powders10.1016/j.ceramint.2011.04.011 ↗
26. Synthesis of W2C by reactive hot pressing and its mechanical properties10.2320/matertrans.MRA2007304 ↗
27. Recent developments on WC-based buck composites10.1007/s10853-010-5046-7 ↗
28. Preparation of WC–W2C composites by arc plasma melting and their characterizations10.1016/j.ceramint.2012.10.016 ↗