journal article·2012-08

Macro/micro structure dependence of mechanical strength of low temperature sintered silicon carbide ceramic foams

Fei Chen, Ying Yang, Qiang Shen, Lianmeng Zhang

Ceramics International· Volume 38· Issue 6
Publisher page

Abstract

Abstract SiC foams with high strength were prepared by polymer replica technique, including coating with SiC slurry (using Al2O3 and Y2O3 as the sintering additives) and polymer replica removal. The results suggest that the macro porous structure, including the pore size and the strut diameter, could be controlled by choosing different polymer sponge templates with the different PPI (pores per inch) values and slurry coating times. Liquid phase sintering plays a significant role in the low temperature densification of the cell struts of SiC foams. The compressive strength increased significantly with the tendency of cell strut densification. SiC ceramic foams with PPI value of 20, porosity of 77%, highly densified strut microstructure and maximum compressive strength of 2.48 MPa were obtained at 1700 °C with SiC as the main phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Permeability and structure of cellular ceramics: a comparison between two preparation techniques10.1111/j.1151-2916.1998.tb02782.x ↗
2. Processing routes to macroporous ceramics: a review10.1111/j.1551-2916.2006.01044.x ↗
3. Conventional and novel processing methods for cellular ceramics
4. Mechanical characterization of cellular ceramics10.1016/j.msea.2009.02.012 ↗
5. Improving the properties of ceramic foams by a vacuum infiltration process10.1016/j.jeurceramsoc.2010.06.003 ↗
6. Reinforcement of a reticulated porous ceramic by a novel infiltration technique10.1111/j.1551-2916.2006.00997.x ↗
7. Surface treatment of templates for fabrication of reticulated porous ceramics10.1111/j.1551-2916.2007.01830.x ↗
8. Improvement in the strut thickness of reticulated porous ceramics10.1111/j.1151-2916.2001.tb00895.x ↗
9. The control of slurry rheology in the processing of reticulated porous ceramics10.1016/S0025-5408(02)00674-8 ↗
10. Compression strength and wear resistance of ceramic foams–polymer composites10.1016/j.matlet.2005.11.092 ↗
11. Low-temperature sintering of SiC reticulated porous ceramics with MgO–Al2O3–SiO2 additives as sintering additives10.1007/s10853-006-0473-1 ↗
12. Macroporous silicon carbide foams for porous burner applications and catalyst supports10.1016/j.jpcs.2006.12.008 ↗
13. Silicon carbide foams by polyurethane replica technique10.1002/adem.200500163 ↗
14. Effect of additive content on liquid-phase sintering on silicon carbide ceramics10.1016/S0025-5408(99)00172-5 ↗
15. The mechanical properties of cellular solids10.1007/BF02645546 ↗
16. High temperature oxidation of SiC under helium with low-pressure oxygen. Part 1. Sintered α-SiC10.1016/j.jeurceramsoc.2010.04.025 ↗
17. Role of the powder bed in the densification of silicon carbide sintered with yttria and alumina additives10.1111/j.1151-2916.1999.tb02266.x ↗
18. Gibson · 1997
19. Properties of liquid phase pressureless sintered silicon carbide obtained without sintering bed10.1016/j.jeurceramsoc.2004.05.014 ↗
20. Effect of active oxidation on the flexural strength of α-silicon carbide10.1111/j.1151-2916.1990.tb05237.x ↗
21. Preparation of silicon carbide reticulated porous ceramics sintered at low temperature with PCS as sintering additive10.3724/SP.J.1077.2010.00168 ↗
22. Highly porous hydroxyapatite scaffolds with elongated pores using stretched polymeric sponges as novel template10.1016/j.matlet.2009.05.017 ↗
23. Preparation and characterization of ceramic foam produced via polymeric foam replication method10.1016/j.jmatprotec.2007.12.099 ↗
24. Improved compressive strength of reticulated porous zirconia using carbon coated polymeric sponge as novel template10.1016/j.matlet.2006.01.031 ↗
25. Effect of recoating slurry viscosity on the properties of reticulated porous silicon carbide ceramics10.1016/j.ceramint.2005.01.008 ↗
26. Processing of ceramic foams from polymeric precursor-alumina suspensions10.1177/026248930102000102 ↗
27. Reaction bonding of open cell SiC–Al2O3 composites10.1016/S0025-5408(01)00671-7 ↗