Screen printing of sol–gel-derived electrolytes for solid oxide fuel cell (SOFC) application
Source abstract
Abstract
Abstract The idea of using the sol–gel technique for producing low-cost components for solid oxide fuel cell (SOFC) application has attracted great interest. Besides its economic advantages, the sol–gel technique additionally offers the chance to reduce either the thickness of the electrolyte and therefore to reduce ohmic resistances or to lower the sintering temperature of single components like the electrolyte layer, due to the clearly reduced particle sizes of colloidal distributed particles in the sol. The work presented here deals with the development of sols and their application in combination with yttria fully stabilized zirconia mixed-oxide powders for the preparation of screen-printing pastes. Besides physical, chemical and thermal characterization of the sols, variations of the composition of the sol as well as of the pastes composed of sol and mixed-oxide powder were evaluated for preparing dense, gas-tight layers sintered at various temperatures, resulting in sufficient gas-tightness to ensure high power density SOFCs. Additionally, technological screen-printing parameters were studied. Single cell tests (50 mm × 50 mm) revealed current densities of approx. 1 A/cm2. These values are comparable to current densities obtained by cells based on normal electrolyte layers, which were prepared in parallel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Operation and analysis of planar SOFC stacks
2. Influence of alumina dopant on the properties of yttria-stabilized zirconia for SOFC applications10.1023/A:1016506905271 ↗
3. Advances in the anode supported planar SOFC technology
4. Densification of yttria-stabilized zirconia electrolytes through addition of sintering additives
5. Cell properties of SOFC prepared by doctor blade and screen printing method
6. Status of anode-supported thin electrolyte ceramic SOFC component development at ECN
7. Development of thin-film SOFC for stationary and mobile applications by using plasma deposition technology
8. Plasma-sprayed components for SOFC applications10.1016/j.surfcoat.2006.04.039 ↗
9. YSZ electrolyte of anode-supported SOFCs prepared from sub micron YSZ powders10.1007/s10853-005-2000-1 ↗
10. Nanocrystallized yttria-stabilized zirconia for solid oxide fuel cell applications10.1002/adem.200400179 ↗
11. Manufacturing routes and state-of-the-art of the planar Jülich anode-supported concept for solid oxide fuel cells10.1002/9781118370858.ch11 ↗
12. Components manufacturing for solid oxide fuel cells10.1016/S0167-2738(02)00344-2 ↗
13. Thick ceramic coatings using a sol gel based ceramic-ceramic 0–3 composite10.1016/0257-8972(95)02562-6 ↗
14. D.A. Barrow, T.E. Petroff, M. Sayer, Method for producing thick ceramic films by a sol gel coating process, US Patent No. 5,585,136 (1996).
15. Recent advances in the liquid-phase syntheses of inorganic nanoparticles10.1021/cr030027b ↗