journal article·2013-01

Effects of heat-treatment temperature and starting composition on morphology of boron carbide particles synthesized by carbothermal reduction

Tomohiro Kobayashi, Katsumi Yoshida, Toyohiko Yano

Ceramics International· Volume 39· Issue 1
Publisher page

Abstract

Abstract Carbothermal reduction using B 2 O 3 and carbon black was applied for synthesis of B 4 C powder and the effects of heat-treatment temperature and starting composition of raw mixture on morphology of B 4 C particles were investigated. Morphology of B 4 C particles synthesized at 1450 °C was mainly spherical shapes. The B 4 C powder synthesized at 1550 °C was large and changed in morphology from polyhedral to skeletal shape, and particle size of B 4 C increased with an increase in the amount of B 2 O 3 in the starting mixtures. The B 4 C powder synthesized beyond 1650 °C consisted from dendrite-like particles aggregated by small primary particles. Morphology of the primary B 4 C particles synthesized at 1750 °C changed from polyhedral to rounded shape with increasing the amount of B 2 O 3 in the starting mixtures. It is clarified that heat-treatment temperature and the starting compositions of raw mixtures mainly affected B 4 C nuclei number along with primary particle size and morphology of primary B 4 C particles, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Boron and Carbon Nanomaterials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Boron carbide—a comprehensive review10.1016/0955-2219(90)90048-K ↗
2. Growth and characterization of boron carbide nanowires10.1023/A:1006660012664 ↗
3. Investigation on the growth of boron carbide nanowires10.1021/cm020630v ↗
4. Straight boron carbide nanorods prepared from carbon nanotubes10.1039/b204792f ↗
5. Synthesis and characterisation of boron carbide whiskers and thin elongated platelets10.1016/S0022-0248(01)02272-2 ↗
6. Facile synthesis of boron carbide elongated nanostructures via a simple in situ thermal evaporation process10.1016/j.ceramint.2010.11.028 ↗
7. Growth and thermal etching of boron carbide10.1016/0022-0248(73)90143-7 ↗
8. Preparation of carbon-free B4C powder from B2O3 oxide by carbothermal reduction process10.1016/S0167-577X(03)00579-2 ↗
9. Synthesis of boron carbide powder by a carbothermic reduction method10.1016/j.jeurceramsoc.2003.11.012 ↗
10. Kinetics of carbothermal reduction synthesis of boron carbide10.1111/j.1151-2916.1992.tb05604.x ↗
11. Carbothermal route for preparation of boron carbide powder from boric acid-citric acid gel precursor10.1016/S0022-3115(02)00704-3 ↗
12. The effect of time, temperature and composition on boron carbide synthesis by sol-gel method10.1007/s11665-007-9125-0 ↗
13. Low-temperature synthetic route for boron carbide10.1016/j.jeurceramsoc.2004.08.011 ↗
14. Synthesis of boron carbide powder from polyvinyl borate precursor10.1016/j.matlet.2008.09.012 ↗
15. Low-temperature synthesis of boron carbide powder from condensed boric acid-glycerin product10.1016/j.matlet.2011.03.046 ↗
16. Effect of boron oxide/carbon arrangement of precursor derived from condensed polymer-boric acid product on low-temperature synthesis of boron carbide powder10.2109/jcersj2.119.422 ↗
17. Mass spectrometric study of gaseous species in the B-B2O3 system10.1063/1.1742952 ↗
18. Composition of the gaseous phase over the system B4C-B2O310.1007/BF00795986 ↗