Reactive synthesis for porous Ti3AlC2 ceramics through TiH2, Al and graphite powders
Source abstract
Abstract
Abstract Porous Ti 3 AlC 2 ceramics were fabricated by reactive synthesis. The process of fabrication involved five steps: (i) the pyrolysis of stearic acid at 450 °C; (ii) the decomposition of TiH 2 at 700 °C, which leads to the conversion of TiH 2 to Ti; (iii) the solid–liquid chemical reaction of solid Ti and molten Al at 800–1000 °C, which converts the mixture to Ti–Al compounds; (iv) the newly synthesized Ti–Al compounds that react with surplus Ti and graphite to form ternary carbides and TiC at 1100–1200 °C; and (v) reactive synthesized ternary carbides and TiC that yield porous Ti 3 AlC 2 at 1300 °C. The effects of sintering temperature and Al contents on porosity, pore size and permeability of porous Ti 3 AlC 2 ceramics were examined. The results revealed that the porosity and permeability tended to increase with reactive sintering temperature. The pore forming mechanism accompanying phase transformation was explored in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Review functional materials of porous metals made by P/M, electroplating and some other techniques10.1023/A:1012483920628 ↗
2. Water filtration performance of a lyotropic liquid crystal polymer membrane with uniform, sub-1-nm pores10.1016/j.memsci.2010.09.028 ↗
3. Integration of separation and photocatalysis using an inorganic membrane modified with Si-doped TiO2 for water purification10.1016/j.memsci.2009.02.040 ↗
4. A review of water treatment membrane nanotechnologies10.1039/c0ee00541j ↗
5. Novel silica membranes for high temperature gas separations10.1016/j.memsci.2011.01.045 ↗
6. Synthesis and characterization of porous Fe–25wt% Al alloy with controllable pore structure10.1007/s11106-010-9220-x ↗
7. The corrosion behavior of porous Ni3Al intermetallic materials in strong alkali solution10.1016/j.intermet.2011.06.016 ↗
8. Summary of constitutional data on the aluminum–carbon–titanium system10.1007/BF02647559 ↗
9. Microstructure and properties of Ti3AlC2 prepared by the solid–liquid reaction synthesis and simultaneous in-situ hot pressing process10.1016/S1359-6454(02)00117-9 ↗
10. Synthesis of single-phase polycrystalline Ti3SiC2 and Ti3AlC2 by hot pressing with the assistance of metallic Al or Si10.1016/S0167-577X(03)00567-6 ↗
11. Synthesis and characterization of Ti3AlC210.1111/j.1151-2916.2000.tb01281.x ↗
12. Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis10.1023/A:1013147121618 ↗
13. Microstructure and properties of bulk Ta2AlC ceramic synthesized by an in-situ reaction/hot pressing method10.1016/j.jeurceramsoc.2007.10.006 ↗
14. Oxidation behavior of Ti3AlC2 at 1000–1400°C in air10.1016/S0010-938X(02)00177-4 ↗
15. Summary of constitutional data on the aluminum–carbon–titanium system10.1007/BF02647559 ↗
16. Fabrication of high-purity ternary carbide Ti3AlC2 by spark plasma sintering (SPS) technique10.1016/j.ceramint.2006.04.018 ↗
17. Synthesis and mechanical properties of Ti3AlC2 by hot pressing TiCx/Al powder mixture10.1016/j.jeurceramsoc.2007.09.015 ↗
18. Synthesis of ternary titanium aluminum carbides using self-propagating high-temperature synthesis technique10.1111/j.1151-2916.2001.tb01138.x ↗
19. Microstructure and properties of Ti3AlC2 prepared by the solid–liquid reaction synthesis and simultaneous in-situ hot pressing process10.1016/S1359-6454(02)00117-9 ↗
20. Solid–liquid reaction synthesis of layered machinable Ti3AlC2 ceramic10.1039/b108685e ↗
21. Development of biporous Ti3AlC2 ceramic wicks for loop heat pipe10.1016/j.matlet.2012.09.083 ↗
22. Incipient and regular kink bands in fully dense and 10vol% porous Ti2AlC10.1016/j.actamat.2005.11.035 ↗
23. Processing and characterization of porous Ti2AlC with controlled porosity and pore size10.1016/j.actamat.2012.07.052 ↗
24. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
25. Effects of the Al content on pore structures of porous Ti–Al alloys10.1016/j.intermet.2007.11.002 ↗
26. Tailoring titanium hydride decomposition kinetics by annealing in various atmospheres10.1002/adem.200300572 ↗
27. Kinetics of thermal decomposition of titanium hydride powder using in situ high-temperature X-ray diffraction (HTXRD)10.1590/S1516-14392005000300012 ↗
28. The kinetics of two-stage formation of TiAl3 in multilayered Ti/Al foils prepared by accumulative roll bonding10.1016/j.intermet.2009.02.015 ↗
29. Formation of TiAl intermetallics by heat treatment of cold-sprayed precursor deposits10.1016/j.jallcom.2006.06.101 ↗
30. Reaction synthesis of TiAl/Ti2AlC in situ composites
31. Reaction mechanism for the synthesis of Ti3AlC2 through an intermediate carbide of Ti3AlC from elemental Ti, Al, and C powder mixture10.2109/jcersj2.118.37 ↗
32. Fabrication of Ti–Al micro/nanometer-sized porous alloys through the Kirkendall effect10.1002/adma.200602398 ↗
33. Growth of intermetallic layer in multi-laminated Ti/Al diffusion couples10.1016/j.msea.2006.07.077 ↗
34. Rapid synthesis of single-phase Ti3AlC2 through pulse discharge sintering a TiH2/Al/TiC powder mixture10.1016/j.scriptamat.2007.01.026 ↗
35. Using cold roll bonding and annealing to process Ti/Al multi-layered composites from elemental foils10.1016/j.msea.2004.01.021 ↗
36. The phase transformation and microstructure of TiAl/Ti2AlC composites caused by hot pressing10.1016/j.ceramint.2008.10.009 ↗
37. Effects of the Al content on pore structures of porous Ti3AlC2 ceramics by reactive synthesis