Simple hydrothermal preparation of nanofibers from a natural ilmenite mineral
Source abstract
Abstract
Abstract Titanate nanofibers were synthesized by a simple hydrothermal method using a natural ilmenite mineral as the starting material. The chemical composition, crystalline structure, shape, size, and specific surface area of the prepared samples were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and the Brunauer–Emmett–Teller analysis (BET). The crystalline structure of the as-synthesized nanofibers demonstrated a layered titanate form, H 2 Ti x O 2 x +1 . The length of the prepared nanofibers ranged from 2 to 7 μm with diameters ranging from 20 to 90 nm. The as-synthesized nanofibers were solids with BET surface areas of approximately 50 m 2 /g. This synthetic method provides a simple route for the fabrication of one-dimensional (1-D) nanostructured materials from a low-cost natural mineral.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Optimizing the photocatalytic properties of hydrothermal TiO2 by the control of phase composition and particle morphology. A systematic approach10.1021/ja067050+ ↗
2. Biocompatibility of cluster-assembled nanostructured TiO2 with primary and cancer cells10.1016/j.biomaterials.2006.01.056 ↗
3. Soft tissue response to titanium dioxide nanotube modified implants10.1016/j.actbio.2011.05.003 ↗
4. Structural characterization and morphology of electrospun TiO2 nanofibers10.1016/j.mseb.2006.04.030 ↗
5. Inorganic nanotubes10.1039/b208990b ↗
6. Influences of saturation ratios on crystallization of anatase titanium dioxide by a titanium alkoxide hydrolysis10.1016/j.ceramint.2007.07.006 ↗
7. Photocatalytic activities of electrospun tin oxide doped titanium dioxide nanofibers10.1016/j.ceramint.2012.02.030 ↗
8. Fabrication and characterization of neat and aluminium-doped titanium (IV) oxide fibers prepared by combined sol–gel and electrospinning techniques10.1016/j.ceramint.2010.04.004 ↗
9. Garcia-Martinez · 2009
10. Composite of TiO2 nanowires and nafion as humidity sensor material10.1016/j.snb.2005.09.001 ↗
11. Formation and photoluminescence of single-crystalline rutile TiO2 nanowires synthesized by thermal evaporation10.1088/0957-4484/17/1/017 ↗
12. TiO2-B nanowires10.1002/anie.200353571 ↗
13. Lithium-ion intercalation into TiO2-B nanowires10.1002/adma.200400795 ↗
14. Energy materials10.1016/j.solidstatesciences.2005.04.018 ↗
15. Room-temperature hydrogen uptake by TiO2 nanotubes10.1021/ic0501723 ↗
16. Reversible storage of molecular hydrogen by sorption into multilayered TiO2 nanotubes10.1021/jp0536394 ↗
17. Application of titania nanotubes to a dye-sensitized solar cells10.5796/electrochemistry.70.418 ↗
18. Electrospun TiO2 electrodes for dye-sensitized solar cells10.1088/0957-4484/15/12/030 ↗
19. Partially nanowire-structured TiO2 electrode for dye-sensitized solar cells
20. Photoelectrochemical cells10.1038/35104607 ↗
21. Titanium dioxide photocatalysis10.1016/S1389-5567(00)00002-2 ↗
22. Single- and double-layered mesoporous TiO2/P25 TiO2 electrode for dye-sensitized solar cell10.1016/j.solmat.2004.06.010 ↗
23. Preparation and characterization of mesoporous MO2 (M=Ti, Ce, Zr, and Hf) nanopowders by a modified sol–gel method10.1016/j.ceramint.2004.10.009 ↗
24. Preparation and characterization of mesoporous TiO2–CeO2 nanopowders respond to visible wavelength10.1016/j.jssc.2004.10.028 ↗
25. Synthesis, characterization, and photocatalytic activity for hydrogen evolution of nanocrystalline mesoporous titania prepared by surfactant-assisted templating sol–gel process10.1016/j.jssc.2004.11.014 ↗
26. Fabrication of titania nanofibers by electrospinning10.1021/nl034039o ↗
27. Oriented single crystal titania nanofibers via nanocarving with hydrogen-bearing gas10.1002/adma.200305781 ↗
28. Formation of titanium dioxide nanotube array10.1021/la9507803 ↗
29. Direct preparation of anatase TiO2 nanotubes in porous alumina membranes10.1039/a906005g ↗
30. TiO2 tubes synthesized by using ammonium sulfate and carbon nanotubes as templates10.1023/A:1022680707068 ↗
31. Preparation of TiO2 hollow-fibers using supramolecular assemblies10.1021/cm0000907 ↗
32. Titanium oxide nanotube arrays prepared by anodic oxidation10.1557/JMR.2001.0457 ↗
33. Formation of titanium oxide nanotube10.1021/la9713816 ↗
34. Titania nanotubes prepared by chemical processing10.1002/(SICI)1521-4095(199910)11:15<1307::AID-ADMA1307>3.0.CO;2-H ↗
35. Preparation and structure analysis of titanium oxide nanotubes10.1063/1.1423403 ↗
36. Synthesis and thermal analyses of TiO2-derived nanotubes prepared by the hydrothermal method10.1557/JMR.2004.0128 ↗
37. Heat treatment effect on the structure of TiO2-derived nanotubes prepared by hydrothermal method10.1002/9781118407158.ch20 ↗
38. Natural rutile-derived titanate nanofibers prepared by direct hydrothermal processing10.1557/JMR.2005.0135 ↗
39. Synthesis of titanate, TiO2 (B), and anatase TiO2 nanofibers from natural rutile sand10.1016/j.jssc.2005.07.022 ↗
40. Synthesis of TiO2 nanowires and their photocatalytic activity for hydrogen evolution10.1016/j.catcom.2007.11.016 ↗
41. Fabrication and utilization of titania nanofibers from natural leucoxene mineral in photovoltaic applications10.1143/JJAP.50.01BJ16 ↗
42. Hydrothermal synthesis, characterization, photocatalytic activity and dye-sensitized solar cell performance of mesoporous anatase TiO2 nanopowders10.1016/j.materresbull.2007.02.028 ↗
43. Titanium oxide nanotubes, nanofiber and nanowires10.1016/j.colsurfa.2004.04.030 ↗
44. Integrated XRD, EPMA and XRF study of ilmenite and titania slag used in pigment production10.1016/j.jallcom.2008.06.121 ↗
45. Hydrothermal synthesis of single-crystalline anatase TiO2 nanorods with nanotubes as the precursor10.1021/jp0567321 ↗
46. Solubility of hematite in LiOH, NaOH and KOH solutions10.1016/S0304-386X(96)00068-0 ↗
47. Geochim, iron(III) solubility and speciation in aqueous solutions. Experimental study and modelling: Part 1. Hematite solubility from 60 to 300°C in NaOH–NaCl solutions and thermodynamic properties of Fe(OH)4−(aq)10.1016/S0016-7037(99)00070-8 ↗
48. Hydrothermally stabilized Fe(III) doped titania active under visible light for water splitting reaction10.1016/j.ijhydene.2008.07.119 ↗
49. Formation mechanism of TiO2-derived titanate nanotubes prepared by the hydrothermal process10.1021/ic9025816 ↗
50. Effect of collector grounding on directionality of electrospun titania fibers10.1016/j.jeurceramsoc.2007.02.010 ↗
51. Electrospun nanofibers of V-doped TiO2 with high photocatalytic activity10.1016/j.jcis.2010.05.067 ↗
52. Preparation of Pt-loaded TiO2 nanofibers by electrospinning and their application for WGS reactions10.1016/j.apcata.2008.10.016 ↗
53. Effects of synthetic conditions and heat-treatment on the structure of partially ion-exchanged titanate nanotubes10.1016/j.matchemphys.2004.12.010 ↗
54. Synthesis of TiO2(B) nanowires and TiO2 anatase nanowires by hydrothermal and post-heat treatments10.1016/j.jssc.2005.04.025 ↗