journal article·2012-08

Experimental investigation and mathematical modeling of oxygen permeation through dense Ba0.5Sr0.5Co0.8Fe0.2O3− (BSCF) perovskite-type ceramic membranes

Amir Behrouzifar, Amir Atabak Asadi, Toraj Mohammadi, Afshin Pak

Ceramics International· Volume 38· Issue 6
Publisher page

Abstract

Abstract Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3− δ (BSCF) perovskite powder was synthesized via EDTA/citrate complexation method. BSCF membranes were formed by pressing powder at 400 MPa and sintering at 1100 °C for 10 h. XRD patterns showed that a high pure powder with cubic structure was obtained. SEM micrographs revealed that the membranes are dense with large grains. Effects of temperature, feed and permeate side oxygen partial pressures, flow rates and membrane thickness on oxygen permeation flux were studied experimentally. A Nernst–Planck based mathematical model, including surface exchange kinetics and bulk diffusion, was developed to predict oxygen permeation flux. Considering non-elementary surface reactions and introducing system hydrodynamics into the model resulted in an excellent agreement (RMSD = 0.0617, AAD = 0.0487 and R 2 = 0.985) between predicted and measured fluxes. The results showed that oxygen permeation flux increases with temperature, feed side oxygen partial pressure and flow rates, however decreases with permeate side oxygen partial pressure and membrane thickness. Contribution of feed side surface exchange reactions, bulk diffusion and permeate side surface exchange reactions resistances in the total resistance are in the range of 8–32%, 10–81% and 11–59%, respectively. Permeation rate-limiting step was determined using the membrane dimensionless characteristic thickness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Air separation gases
2. Options for procuring oxygen
3. Mixed conducting ceramics for catalytic membrane processing10.1080/01614940600631348 ↗
4. Progress in understanding and development of Ba0.5Sr0.5Co0.8Fe0.2O3−δ based cathodes for intermediate-temperature solid-oxide fuel cells: a review10.1016/j.jpowsour.2009.02.069 ↗
5. Oxygen permeation through perovskite-type oxides10.1246/cl.1985.1743 ↗
6. Effect of cation substitution on the oxygen semipermeability of perovskite-type oxides10.1246/cl.1988.503 ↗
7. Mixed ionic-electronic conductivity of La1−xSrxCo1−yFeyO3−δ perovskite-type oxides10.1016/0025-5408(88)90224-3 ↗
8. Investigation of the permeation behavior and stability of a Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen membrane10.1016/S0376-7388(00)00337-9 ↗
9. High performance perovskite hollow fibres for oxygen separation10.1016/j.memsci.2010.11.002 ↗
10. Oxygen exchange-limited transport and surface activation of Ba0.5Sr0.5Co0.8Fe0.2O3−δ capillary membranes10.1016/j.memsci.2010.11.034 ↗
11. Oxygen permeation study and improvement of Ba0.5Sr0.5Co0.8Fe0.2Ox perovskite ceramic membranes10.1016/j.memsci.2010.11.073 ↗
12. First-principles electronic-structure calculations on the stability and oxygen conductivity in Ba0.5Sr0.5Co0.8Fe0.2O3−δ10.1016/j.memsci.2010.09.046 ↗
13. Oxygen permeation and stability investigations on MIEC membrane materials under operating conditions for power plant processes10.1016/j.memsci.2010.12.021 ↗
14. Creep behaviour of tubular Ba0.5Sr0.5Co0.8Fe0.2O3−δ gas separation membranes10.1016/j.jeurceramsoc.2010.10.030 ↗
15. Micro- and macro-indentation behaviour of Ba0.5Sr0.5Co0.8Fe0.2O3−d perovskite10.1016/j.jeurceramsoc.2010.10.022 ↗
16. Novel cobalt-free oxygen-permeable perovskite-type membrane10.1021/cm902882s ↗
17. Diffusion and surface exchange coefficients in mixed ionic electronic conducting oxides from the pressure dependence of oxygen permeation10.1016/S0167-2738(97)00492-X ↗
18. Synthesis and oxygen permeation properties of La0.2Sr0.8Co0.2Fe0.8O3−δ membranes10.1016/S0167-2738(99)00136-8 ↗
19. Oxygen permeation rates through ion-conducting perovskite membranes10.1016/S0009-2509(99)00015-9 ↗
20. A semi-empirical equation for oxygen nonstoichiometry of perovskite-type ceramics10.1016/S0167-2738(02)00524-6 ↗
21. Modeling of air separation in a LSCF hollow-fiber membrane module10.1002/aic.690480711 ↗
22. Mixed conducting ceramic hollow-fiber membranes for air separation10.1002/aic.10475 ↗
23. Oxygen production using dense ceramic hollow fiber membrane modules with different operating modes10.1002/aic.11116 ↗
24. Mixed ionic–electronic conducting (MIEC) ceramic-based membranes for oxygen separation10.1016/j.memsci.2008.03.074 ↗
25. Simulation of a membrane unit for oxyfuel power plants under consideration of realistic BSCF membrane properties10.1016/j.memsci.2010.01.048 ↗
26. Kontturi · 2008
27. Goto · 1998
28. Oxygen permeation of BaxSr1−xCo0.8Fe0.2O3−δ perovskite-type membrane: experimental and modeling10.1016/j.desal.2010.11.022 ↗
29. Synthesis, oxygen permeation study and membrane performance of a Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen-permeable dense ceramic reactor for partial oxidation of methane to syngas10.1016/S1383-5866(01)00095-8 ↗
30. Dense ceramic membranes for oxygen separation10.1016/S0927-5193(96)80013-1 ↗
31. Powder diffraction of the cubic perovskite Ba0.5Sr0.5Co0.8Fe0.2O3−δ10.1154/1.1536927 ↗