journal article·2016-03

Aluminum nitride shaping by non-aqueous gelcasting of low-viscosity and high solid-loading slurry

Liya Shen, Xueshun Xu, Wei Lu, Bo Shi

Ceramics International· Volume 42· Issue 4
Publisher page

Abstract

Abstract Aluminum nitride (AlN) ceramics has been prepared by a modified non-aqueous gelcasting technique, and the ceramic slurries with low viscosity and high solid loading were obtained by using 1-methyl-2-pyrrolidinone as solvent and Solsperse® 24,000 as dispersant. The rheological behaviors of the AlN ceramic slurry and the densities of AlN ceramics were studied. Typically, the AlN ceramic slurry (Solsperse® 24,000 of 0.5 wt% and solid loading of 50 vol%) showed a viscosity of 0.09 Pa·s at shear rate of 100 s −1 . And more interestingly, when increasing solid loading to 55 vol%, the AlN slurry still kept a low viscosity of about 0.28 Pa·s, which was reduced by 30% compared to the reported values. As a result, the resultant green body exhibited a relative density of 65.5%, and a flexural strength of 42.3 MPa. After sintering at 1900 °C for 5 h, the AlN ceramics with an improved relative density of 99.4% was produced. Thus, this research would provide a new way to prepare low-viscosity and high solid-loading AlN slurry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Phonon scattering and thermal conduction mechanism of sintered aluminum nitride ceramics10.1007/BF00353168 ↗
2. Dielectric and thermal properties of AlN ceramics10.1016/j.jeurceramsoc.2006.11.023 ↗
3. Aluminum nitride: a versatile but challenging material
4. Aluminum nitride for heat spreading in RFIC׳s10.1016/j.sse.2008.04.009 ↗
5. Preparation of the AlN ceramic substrate by tape casting
6. High thermal conductivity aluminum nitride substrates prepared by aqueous tape casting10.1111/j.1551-2916.2005.00828.x ↗
7. Gelcasting of aluminum nitride ceramics10.1111/j.1551-2916.2009.03489.x ↗
8. A. Janney, Mark, D., Nunn. Stephen, A., Walls, Claudia, Gelcasting, The handbook of ceramic engineering, Mohamed. N. Rahaman, Marcel Dekker (1998).
9. Gelcasting-a new ceramic forming process
10. Gelcasting: from laboratory development towards industrial production10.1016/S0955-2219(96)00147-1 ↗
11. Recent developments in gelcasting of ceramics10.1016/j.jeurceramsoc.2010.12.035 ↗
12. Preparation of alumina by aqueous gelcasting10.1016/j.ceramint.2003.07.009 ↗
13. Gelatin gelcasting of ceramic components10.1016/S0924-0136(02)00862-2 ↗
14. A thermo-chemical surface treatment of aln powder for the aqueous processing of AlN ceramics10.1557/jmr.2004.19.3.746 ↗
15. Preparation of boron carbide–aluminum composites by non-aqueous gelcasting10.1016/j.ceramint.2008.12.012 ↗
16. Microstructures and dielectric properties of Ba0.6Sr0.4TiO3–MgO ceramics prepared by non-aqueous gelcasting and dry pressing10.1016/j.materresbull.2011.09.005 ↗
17. Novel route to β-SiAlON-SiO2 ceramic composites10.1179/1743676110Y.0000000004 ↗
18. Freeze casting of aqueous alumina slurries with glycerol for porous ceramics10.1016/j.ceramint.2009.09.036 ↗
19. Gelcasting, a near net shape technique10.1016/S0261-3069(99)00075-8 ↗
20. A physical model for the drying of gelcast ceramics10.1111/j.1151-2916.1999.tb01795.x ↗
21. M.A. Janney, Method for molding ceramic powders, USC04B19/12, US4894194 (1990).
22. Rheological behavior of dilatant (shear‐thickening) fluids10.1122/1.549098 ↗
23. Electrical double layer forces, a Monte Carlo study10.1063/1.446912 ↗
24. Adsorption properties of motas dispersant on the interface of hexaflumuron pmicles
25. Investigation of new epoxy resins for the gelcasting of ceramics10.1111/j.1551-2916.2008.02278.x ↗
26. Effect of oxygen on the thermal conductivity of aluminium nitride ceramics10.1016/S0955-2219(97)00078-2 ↗
27. Oxygen enrichment at inversion domain boundaries in aluminum nitride-influence on thermal-conductivity
28. Densification and thermal conductivity of low-sintering-temperature AlN materials10.1016/0955-2219(90)90031-A ↗
29. High‐thermal‐conductivity aluminum nitride ceramics: the effect of thermodynamic, kinetic, and microstructural factors10.1111/j.1151-2916.1997.tb03000.x ↗