journal article·2016-05

Tensile fatigue behavior of plain-weave reinforced C f /C–SiC composites

Yang Li, Peng Xiao, Zhuan Li, Wei Zhou, Tom Liensdorf, Wolfgang Freudenberg, Nico Langhof, Walter Krenkel

Ceramics International· Volume 42· Issue 6
Publisher page

Abstract

Abstract The fatigue behavior of plain-weave C f /C–SiC composites prepared by liquid silicon infiltration (LSI) was studied under cyclic tensile stress at room temperature. The specimens were loaded with stress levels of 83% and 90% of the mean static tensile strength for 10 5 cycles. The cross-sections and fracture surfaces of the fatigued specimens were examined by optical microscopy (OM) and scanning electron microscopy (SEM), respectively. The results show that the specimens can withstand 10 5 fatigue cycles with a stress level of 90% of the static tensile strength. The retained strengths after fatigue for 10 5 cycles with stress levels of 83% and 90% are about 19% and 11% higher than the static tensile strength. Due to the observation of the microstructures a relief of the thermal residual stress (TRS) caused by stress-induced cracking is probably responsible for the enhancement. Furthermore, the fracture surfaces indicate that the fatigue stress results in interfacial debonding between the carbon fiber and matrix. Additionally, more single-fiber pull out was observed within the bundle segments of fatigued specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview10.1016/S0266-3538(03)00230-6 ↗
2. Carbon fiber reinforced CMC for high-performance structures10.1111/j.1744-7402.2004.tb00169.x ↗
3. C/C–SiC composites for space applications and advanced friction systems10.1016/j.msea.2005.08.204 ↗
4. Preparation and tribological properties of C fibre reinforced C/SiC dual matrix composites fabrication by liquid silicon infiltration10.1016/j.solidstatesciences.2012.10.007 ↗
5. Preparation and tribological properties of C/C–SiC brake composites modified by in situ grown carbon nanofibers10.1016/j.ceramint.2015.05.139 ↗
6. Carbon fibre reinforced silicon carbide composites (C/SiC, C/C–SiC)
7. Development of C/C–SiC brake pads for high-performance elevators10.1111/j.1744-7402.2005.02012.x ↗
8. Cyclic loading of a SiC-fiber reinforced ceramic matrix composite reveals damage mechanisms and thermal residual stress state10.1016/j.compositesa.2012.06.011 ↗
9. Stress-dependence and time-dependence of the post-fatigue tensile behavior of carbon fiber reinforced SiC matrix composites10.1016/j.compscitech.2011.05.013 ↗
10. Damage evolution and real-time non-destructive evaluation of 2D carbon-fiber/SiC-matrix composites under fatigue loading10.1016/j.matlet.2008.04.063 ↗
11. Strength enhancement of 2D-SiCf/SiC composites after static fatigue at room temperature10.1016/j.jeurceramsoc.2007.02.180 ↗
12. Tensile fatigue of a 2.5D C/SiC composite at room temperature and 900°C10.1016/j.matdes.2013.01.076 ↗
13. Cyclic fatigue of ceramic-matrix composites at ambient and elevated temperatures10.1016/0266-3538(96)00025-5 ↗
14. Fatigue of ceramic matrix composites10.1016/0956-7151(94)00304-Z ↗
15. Mechanical hysteresis in ceramic matrix composites10.1016/j.msea.2008.09.128 ↗
16. Real-time damage evaluation of a SiC coated carbon/carbon composite under cyclic fatigue at high temperature in an oxidizing atmosphere10.1016/j.msea.2009.05.051 ↗
17. Fatigue hysteresis behavior of unidirectional C/SiC ceramic–matrix composite at room and elevated temperatures10.1016/j.msea.2014.11.086 ↗
18. Modeling fatigue hysteresis behavior of unidirectional C/SiC ceramic–matrix composite10.1016/j.compositesb.2014.06.014 ↗
19. Cyclic fatigue-crack propagation in a silicon carbide whisker-reinforced alumina composite: role of load ratio10.1007/BF00354244 ↗
20. Modal acoustic emission of damage accumulation in C/C–SiC composites with different fiber architectures10.1016/j.ceramint.2015.06.026 ↗
21. Effect of loading rate and temperature on monotonic tensile behavior in two-dimensional C/SiC composites10.1016/j.ceramint.2014.08.024 ↗
22. Measurement and calculation of thermal residual stress in fiber reinforced ceramic matrix composites10.1016/j.compscitech.2008.08.015 ↗
23. In-plane shear strength of a carbon/carbon composite at different loading rates and temperatures10.1016/j.msea.2010.10.047 ↗
24. Cyclic-Fatigue Behavior of SiC/SiC Composites at Room and High Temperatures10.1111/j.1151-2916.1996.tb08078.x ↗
25. J.J.S. G.Wu, Characterization of fiber/matrix bonding strength during the pyrolysis of CFRP to C/C composites, in: 18th International conference on composites materials Edinburgh, Scotland, 2009.