Influence of loading rate on nanohardness of sapphire
Source abstract
Abstract
Abstract This work reports the loading rate effect on nanohardness of sapphire. The intrinsic nanoscale contact deformation resistance of sapphire increased with the loading rates following empirical power law dependence with a positive exponent. The results showed a significant enhancement (e.g., ~66%) of the nanohardness of sapphire with the increase in loading rates from 10 to 10,000 μN s −1 . These results were explained mainly in terms of the maximum shear stress generated underneath the nanoindenter, dislocation density and critical resolved shear stress of the sapphire.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. J. Askinazi, R.V. Wientzen, C.P. Khattak, Development of large-aperture monolithic sapphire optical windows, In: Proc. SPIE 4375, Window Dome Technol. Mater. VII, vol. 1, 2001, http://dx.doi.org/10.1117/12.439163.10.1117/12.439163 ↗
2. Sapphire ball lens-based fiber probe for common-path optical coherence tomography and its applications in corneal and retinal imaging10.1364/OL.37.004835 ↗
3. Transparent armor
4. Protecting the future force: ceramics research leads to improved armor performance
5. The deformation-behavior of ceramic crystals subjected to very low load (nano)indentations10.1557/JMR.1992.0450 ↗
6. Dey · 2014
7. Evaluation of the mechanical properties of ceramics and thin hard ceramic coatings using nanoindentation10.1080/10589750108953113 ↗
8. Deformation under nanoindents in sapphire, spinel and magnesia examined using transmission electron microscopy10.1080/01418610208235708 ↗
9. Peculiar surface deformation of sapphire: numerical simulation of nanoindentation10.1063/1.1635983 ↗
10. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
11. Comparison of nanoindentation results obtained with Berkovich and cube corner indenters10.1080/14786430600746424 ↗
12. Lars Johnson, Nanoindentation in situ a Transmission Electron Microscope, Master's Thesis, LITH-IFM-EX-07/1732-SE, 2007.
13. Initial stages of contact-induced plasticity in sapphire. I. Surface traces of slip and twinning10.1080/14786430701618464 ↗
14. Initial stages of contact-induced plasticity in sapphire. II. Mechanisms of plasticity initiation10.1080/14786430701618472 ↗
15. Nanoindentation hardness anisotropy of alumina crystal: a molecular dynamics study10.1063/1.2913016 ↗
16. Nanoindentation-induced elastic–plastic transition and size effect in α-Al2O3 (0001)10.1080/09500830701203156 ↗
17. Study on the mechanical properties of sapphire by numerical simulation and nanoindentation technology10.4028/www.scientific.net/AMR.69-70.103 ↗
18. Comparative studies of mechanical properties of stishovite and sapphire single crystals by nanoindentation10.3103/S1063457610060067 ↗
19. Deformation behavior and mechanical properties of polycrystalline and single crystal alumina during nanoindentation10.1016/j.scriptamat.2011.03.022 ↗
20. Nanoscale elastic–plastic deformation and stress distributions of the C plane of sapphire single crystal during nanoindentation10.1016/j.jeurceramsoc.2011.04.012 ↗
21. Nanoindentation study of pop-in phenomenon characteristics and mechanical properties of sapphire (1012) crystal10.1111/j.1551-2916.2012.05405.x ↗
22. Acoustic emission monitoring of the earliest stages of contact-induced plasticity in sapphire10.1016/j.actamat.2003.09.039 ↗
23. Modulus and hardness change of silicon and sapphire substrates by TiC/VC multilayer coatings
24. Improvement in nanoscale contact resistance of alumina10.1007/s00339-012-6888-4 ↗
25. New observations in micro-pop-in issues in nanoindentation of coarse grain alumina
26. Loading rate effect on nanohardness of soda-lime-silica glass10.1007/s11661-010-0176-8 ↗
27. Nanoindentation of soda lime–silica glass: effect of loading rate10.1111/j.2041-1294.2011.00046.x ↗
28. Enhancement in nanohardness of soda–lime–silica glass10.1016/j.jnoncrysol.2011.03.036 ↗
29. Role of the energy of plastic deformation and the effect of loading rate on nanohardness of soda-lime silica glass
30. Initiation of a shear band near a stress concentration in metallic glass10.1016/j.actamat.2007.05.054 ↗
31. Viscoelastic behavior of soda-lime–silica glass determined by high temperature indentation test10.1557/jmr.2006.0097 ↗
32. Indentation-induced damage in GaN epilayers10.1063/1.1436280 ↗
33. Mechanical deformation of single-crystal ZnO10.1063/1.1448175 ↗
34. Nanoindentation: measuring methods and applications10.1016/j.cirp.2010.05.009 ↗
35. Micro- and nanoindentation techniques for mechanical characterisation of materials10.1179/174328006X102475 ↗
36. Time-dependent characteristics of materials and micromechanisms of plastic deformation on a submicron scale by a new pulse indentation technique10.1080/01418610208235697 ↗
37. Nanoindentation studies Cu based bulk metallic glasses10.1016/j.msea.2006.02.258 ↗
38. Investigation on the structural characteristics of metallic glasses based on the first displacement excursion behavior in nanoindentation10.1016/j.msea.2011.09.074 ↗
39. Estimation of the shear transformation zone size in a bulk metallic glass through statistical analysis of the first pop-in stresses during spherical nanoindentation10.1016/j.scriptamat.2012.02.032 ↗
40. On the temperature dependence of the hardness of quasicrystals10.1016/S0921-5093(00)01287-9 ↗
41. Nanoindentation studies of materials10.1016/S1369-7021(06)71495-X ↗
42. Correlation between dislocation density and pop-in phenomena in aluminum studied by nanoindentation and electron channeling contrast imaging10.1016/j.scriptamat.2010.04.048 ↗
43. Indentation induced dislocation nucleation: the initial yield point10.1016/1359-6454(96)00010-9 ↗
44. Direct observation of plastic deformation in iron–3% silicon single crystal by in situ nanoindentation in transmission electron microscopy10.1016/j.scriptamat.2011.01.037 ↗
45. Computational investigation of slip rate dependent friction as a potential contribution to displacement bursts in nanoindentation of nickel10.1016/j.triboint.2011.10.020 ↗
46. Micromechanical properties of single crystal hydroxyapatite by nanoindentation10.1016/j.actbio.2009.02.009 ↗
47. Dislocation cross-slip in GaN single crystals under nanoindentation10.1063/1.3593381 ↗
48. Characterization of pop-in phenomena and indentation modulus in a polycrystalline ZrB2 ceramic10.1016/j.jeurceramsoc.2009.10.014 ↗
49. Nanoindentation on hybrid organic/inorganic silica aerogels10.1016/j.jeurceramsoc.2007.02.209 ↗
50. Mechanical behaviour characterisation of silicon and effect of loading rate on pop-in: a nanoindentation study under ultra-low loads10.1016/j.msea.2008.11.021 ↗
51. A.B. Mann, J.B. Pethica, W.D. Nix, S. Tomiya, Nanoindentation of epitaxial films: a study of pop-in events, In: MRS Symp. Proc., vol. 356, 1994, pp. 271–276.10.1557/PROC-356-271 ↗
52. Mechanical response of amorphous ZrCuTi/PdCuSi nanolaminates under nanoindentation10.1016/j.surfcoat.2011.07.093 ↗
53. Nanoindentation of multilayered epitaxial YBa2Cu3O7−δ thin films and coated conductors10.1016/j.tsf.2010.12.101 ↗
54. Nanoindentation of heterogeneous carbonaceous films containing Ni nano-crystals10.1016/j.micron.2008.01.002 ↗
55. Loading rate effects on the fracture of Ni/Au nano-coated acrylic particles10.3144/expresspolymlett.2012.22 ↗
56. On the nature of displacement bursts during nanoindentation of ultrathin Ni films on sapphire10.1016/j.actamat.2009.11.002 ↗
57. Continuous multi cycle nanoindentation studies on compositionally graded Ti1−xAlxN multilayer thin films10.1016/j.msea.2011.04.068 ↗
58. R.F. King, D. Tabor, The Strength Properties and Frictional Behaviour of Brittle Solids, In: Roy. Soc. Proc. ser. A, vol. 223, 1954, pp. 225–238.10.1098/rspa.1954.0111 ↗
59. Partial cone crack formation in a brittle material loaded with a sliding spherical indenter10.1098/rspa.1967.0138 ↗
60. Effects of crystal orientation and temperature on the strength of sapphire10.1111/j.1151-2916.1998.tb02423.x ↗
61. Discrete and continuous deformation during nanoindentation of thin films10.1016/S1359-6454(00)00009-4 ↗
62. J.W. Morris, Dislocation Plasticity: An Overview, Encyclopedia of Mater. Sci. Tech., Elsevier Science, Amsterdam, 2001.
63. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
64. J.T. Ruggles, Characterization of Geometrically Necessary Dislocation Content with EBSD-Based Continuum Dislocation Microscopy (Ph.D. Dissertation Thesis), Department of Mechanical Engineering, Brigham Young University, 2015.
65. Statistically stored dislocations in rate-independent plasticity
66. Crystallographic aspects of geometrically – Necessary and statistically-stored dislocation density10.1016/S1359-6454(99)00020-8 ↗
67. Oxide ceramics with high density dislocations and their properties10.2320/matertrans.MF200928 ↗
68. Dislocation structures in single-crystal Al2O310.1111/j.1151-2916.1964.tb15660.x ↗