journal article·2018-06

Correlation between microstructure, chemical components and tribological properties of plasma-sprayed Cr 2 O 3 -based coatings

Xiong Yang, Jinyan Zeng, Hao Zhang, Jinshuang Wang, Junbin Sun, Shujuan Dong, Jianing Jiang, Longhui Deng, Xin Zhou, Xueqiang Cao

Ceramics International· Volume 44· Issue 9
Publisher page

Abstract

Abstract The wear resistance of chromium oxide (Cr 2 O 3 ) coatings could be improved by doping modification and changing the structural scale, etc. In this study, micrometric Cr 2 O 3 coatings were doped with different additives, CeO 2 and Nb 2 O 5 . Moreover, Cr 2 O 3 coatings were deposited from nanostructured feedstock by the combination process of plasma spraying and dry-ice blasting. The correlation between the microstructure, chemical components and tribological properties of plasma-sprayed Cr 2 O 3 -based coatings was discussed based on the investigation of their porosity, hardness and friction behaviors. The results showed that the composite coatings doped with additives exhibited a higher microhardness, corresponding to a lower porosity than pure Cr 2 O 3 coating under the identical plasma-spray condition. CeO 2 constituent was found to improve the wear resistance of Cr 2 O 3 coating while Nb 2 O 5 incorporation corresponds to a steep rise in the friction coefficient. The mismatch of coefficient of thermal expansion (CTE) between Cr 2 O 3 and Nb 2 O 5 lamellae facilitated the origin of fatigue cracks and the formation of microfracture pits. Although the combination process promotes a porosity reduction, the nanostructured Cr 2 O 3 (n-Cr 2 O 3 ) coatings present a lower microhardness than micrometric coatings, due to their loosen microstructure from insufficient plasma power compared to microscaled coatings. The wear mechanisms of both the micro- and nanometric Cr 2 O 3 coatings are fatigue cracks and material transfer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Tribological behaviour of plasma-sprayed chromium oxide coating10.1016/S0043-1648(98)00390-1 ↗
2. Erosion–corrosion behaviour of HVOF NiAl–Al2O3, intermetallic-ceramic coating10.1016/S0043-1648(00)00309-4 ↗
3. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
4. Wear resistance of chromium oxide nanostructured coatings10.1016/j.ceramint.2008.02.022 ↗
5. Friction and wear behaviour of plasma-sprayed Cr2O3, coatings against steel in a wide range of sliding velocities and normal loads
6. Replacement of chromium electroplating using advanced material technologies on gas turbine engine components
7. Fabrication of chromium (III) oxide (Cr2O3) coating by electrophoretic deposition10.1111/jace.13147 ↗
8. Preparation of chromia nanoparticles by precipitation–gelation reaction10.1016/j.matlet.2003.11.023 ↗
9. J.R. Davis, Handbook of Thermal Spray Technology, Thermal Spray Society Training Committee, ASM International, 2004.
10. Tribological behavior of plasma sprayed Cr2O3 –3%TiO2, coatings10.1016/j.wear.2011.08.004 ↗
11. Sliding wear characteristics of plasma-sprayed Al2O3 and Cr2O3 coatings against copper alloy under severe conditions10.1016/j.triboint.2009.04.037 ↗
12. The evaluation of a modified chrome oxide based high temperature solid lubricant coating for foil gas bearings
13. Structural characterization and mechanical properties of plasma sprayed nanostructured Cr2O3-Ag composite coatings10.1016/j.surfcoat.2013.09.033 ↗
14. Effect of the structural scale of plasma-sprayed alumina coatings on their friction coefficients10.1007/s11666-008-9255-4 ↗
15. Development and implementation of plasma sprayed nanostructured ceramic coatings10.1016/S0257-8972(01)01470-0 ↗
16. Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: a review10.1007/s11666-006-9010-7 ↗
17. The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions10.1016/S0257-8972(00)00673-3 ↗
18. Nanopowder dispersion and spray-drying process: the case of Cr2O310.3139/146.101282 ↗
19. Microstructure and properties of Cr2O3, coating deposited by plasma spraying and dry-ice blasting10.1016/j.surfcoat.2013.03.016 ↗
20. A.H. Zhang, Q.J. Ding, G. Zhao, et al, Research on Tribological Property of Cr2O3-TiO2 Coating and Application in Ultrasonic Motor, China Ceramics, 2016.
21. Phase transformations in reduced ceria: determination by thermal expansion measurements10.1016/0022-4596(89)90137-0 ↗
22. V. Srikanth, E.C. Subbarao, G.V. Rao, Thermal expansion anisotropy, microcracking and acoustic emission of Nb2O5 ceramics, Ceram. Int., 1992.10.1016/0272-8842(92)90103-K ↗
23. Effects of different additives on microstructure and high-temperature tribological properties of plasma-sprayed Cr2O3 ceramic coatings10.1016/S0043-1648(01)00530-0 ↗
24. Study of Cr2O3 coatings. Part I: microstructure and modulus10.1007/BF02648633 ↗
25. Improvement of adhesion of plasma-sprayed Al2O3 coatings by using dry-ice blasting10.1016/j.matlet.2011.08.110 ↗
26. HVOF-sprayed coatings engineered from mixtures of nanostructured and submicron Al2O3-TiO2, powders: an enhanced wear performance10.1007/s11666-007-9092-x ↗
27. Dry-ice blasting for cleaning: process, optimization and application10.1016/S0043-1648(99)00204-5 ↗
28. Pre-treatment by dry ice blasting for adhesive bonding10.1007/s11740-008-0087-3 ↗
29. Microstructures and mechanical properties of chromium oxide films by arc ion plating10.1016/j.matlet.2003.12.029 ↗
30. Effect of the structural scale of plasma-sprayed alumina coatings on their friction coefficients10.1007/s11666-008-9255-4 ↗
31. H. Czichos, D. Dowson.,Tribology: A systems approach to the Science and Technology of friction, lubrication and wear: Published by Elsevier Scientific Publishing Company, PO Box 330, Amsterdam, The Netherlands, Tribol. Int., 100, 1978, 513.10.1115/1.3453269 ↗
32. In‐situ determination of growth and thermal stresses in chromia scales formed on a ferritic stainless steel10.1002/1521-4176(200207)53:7<486::AID-MACO486>3.0.CO;2-P ↗
33. Thermal expansion of Gd-doped ceria and reduced ceria10.1016/S0167-2738(00)00646-9 ↗
34. Wear behaviour of uncoated and WC-C coated alumina under closed sliding10.1016/0257-8972(92)90021-2 ↗
35. Mechanism of wear reduction of alumina by tribopolymerization10.1016/0043-1648(94)07013-X ↗