journal article·2019-06

Improved densification behavior and energy harvesting properties of low-temperature sintered (Ba, Ca)(Zr, Ti)O3 piezoceramics with a CuO additive

Yingchun Liu, Yunfei Chang, Shuai Yang, Fei Li, Yuan Sun, Jie Wu, Bin Yang, Wenwu Cao

Ceramics International· Volume 45· Issue 8
Publisher page

Abstract

Abstract Piezoelectric energy harvesting has recently attracted substantial interest because of its ability to provide sustainable power for devices that consume very small amounts of energy. In this work, we propose a CuO-doping strategy to develop environmentally friendly (Ba, Ca)(Zr, Ti)O3 (BCZT) piezoelectric energy harvesters with both low sintering temperatures and excellent power generation performance. The CuO dopant greatly promoted the densification behavior of BCZT ceramics, yielding a densified and fine-grained microstructure at a sintering temperature reduced by 125 °C compared to that of undoped BCZT. Moreover, CuO addition substantially reduced the domain size compared to that of the undoped BCZT and thus facilitated domain switching in the ceramics. While maintaining the Curie temperature (Tc) at ∼120 °C, 0.50 mol% CuO-doped ceramics exhibited significantly enhanced electromechanical properties with a figure of merit d33×g33 of 6661 × 10−15 m2/N, high-field piezoelectric constant d33∗ of 873 pm/V, electromechanical coupling factor kp of 0.53 and energy conversion efficiency η of 97%. A high power density of 1.8 μW/mm3, which corresponds to a ∼360% improvement relative to that of the undoped BCZT, was achieved from 0.50 mol% CuO-doped BCZT energy harvesters at 10 m/s2 acceleration. These findings suggest the tremendous potential of CuO-doped (Ba, Ca)(Zr, Ti)O3 piezoceramics in high-power-density energy harvesting applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Energy harvesting from low frequency applications using piezoelectric materials10.1063/1.4900845 ↗
2. Efficient piezoelectric energy harvesters utilizing (001) textured bimorph PZT films on flexible metal foils10.1002/adfm.201601347 ↗
3. Energy harvesting research: the road from single source to multisource10.1002/adma.201707271 ↗
4. Criterion for materials selection in design of bulk piezoelectric energy harvesters10.1109/TUFFC.2010.1734 ↗
5. Lead-free piezoelectric ceramics: alternatives for PZT?10.1007/s10832-007-9047-0 ↗
6. Large piezoelectric effect in Pb-free ceramics10.1103/PhysRevLett.103.257602 ↗
7. Multiphase coexistence and enhanced electrical properties in (1-x-y)BaTiO3-xCaTiO3-yBaZrO3 lead-free ceramics10.1016/j.ceramint.2017.07.057 ↗
8. Compositional-driven phase boundary and electrical properties in (Ba0.94Ca0.06)(Ti1-xMx)O3 (M=Sn, Hf, Zr) lead-free ceramics10.1039/C5DT04891E ↗
9. High piezoelectricity of BaTiO3-CaTiO3-BaSnO3 lead-free ceramics10.1039/C4TC00155A ↗
10. High piezoelectric response and polymorphic phase region in the lead-free piezoelectric BaTiO3-CaTiO3-BaSnO3 ternary system10.1039/C7RA04017B ↗
11. (Ba, Ca)(Zr, Ti)O3 lead-free piezoelectric ceramics-the critical role of processing on properties10.1016/j.jeurceramsoc.2015.05.010 ↗
12. Pyroelectric signals in (Ba, Ca)TiO3-xBa(Sn, Ti)O3 ceramics: a viable alternative for lead-based ceramics10.1016/j.scriptamat.2017.11.027 ↗
13. Thermal stability of piezoelectric coefficients in (Ba1-xCax)(Zr0.05Ti0.95)O3: a lead-free piezoelectric ceramic10.1063/1.4802971 ↗
14. Phase diagram and enhanced piezoelectric response of lead-free BaTiO3-CaTiO3-BaHfO3 system10.1111/jace.13137 ↗
15. Correlation between piezoelectric properties and phase coexistence in (Ba, Ca)(Ti, Zr)O3 ceramics10.1111/jace.13047 ↗
16. Elastic, dielectric, and piezoelectric anomalies and Raman spectroscopy of 0.5Ba(Ti0.8Zr0.2)O3-0.5(Ba0.7Ca0.3)TiO310.1063/1.4714703 ↗
17. Ultrahigh piezoelectricity in ferroelectric ceramics by design10.1038/s41563-018-0034-4 ↗
18. Development of a lead-free copper co-fired BNT-based piezoceramic sintered at low temperature10.1111/jace.15777 ↗
19. Enhanced texture evolution and piezoelectric properties in CuO-doped Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 grain-oriented ceramics10.1063/1.5006288 ↗
20. Microstructural features and electrical properties of copper oxide added potassium sodium niobate ceramics10.1016/j.ceramint.2010.03.018 ↗
21. Significantly enhanced energy-harvesting performance and superior fatigue-resistant behavior in [001]c-textured BaTiO3-based lead-free piezoceramics10.1021/acsami.8b10361 ↗
22. On the determination of the CuO-BaCuO2 and CuO-YCuO2.5 binary phase diagrams10.1016/0022-0248(88)90265-5 ↗
23. Effect of CoO additive on structure and electrical properties of (Na0.5Bi0.5)0.93Ba0.07TiO3 ceramics prepared by the citrate method10.1016/j.actamat.2007.10.014 ↗
24. Superior piezoelectric properties in potassium-sodium niobate lead-free ceramics10.1002/adma.201601859 ↗
25. High piezoelectricity due to multiphase coexistence in low-temperature sintered (Ba, Ca)(Ti, Sn)O3-CuOx ceramics10.1063/1.4826933 ↗
26. High piezoelectricity in CuO-modified Ba(Ti0.90Sn0.10)O3 lead-free ceramics with modulated phase structure10.1016/j.jeurceramsoc.2016.11.028 ↗
27. Piezoelectric properties and stabilities of CuO-modified Ba(Ti, Zr)O3 ceramics10.1063/1.3072347 ↗
28. Piezoelectric and dielectric properties of B2O3-added (Ba0.85Ca0.15) (Ti0.915Zr0.085)O3 ceramics sintered at low temperature10.1016/j.matlet.2015.03.121 ↗
29. Grain size and domain size relations in bulk ceramic ferroelectric materials10.1016/0022-3697(96)00019-4 ↗
30. Intrinsic and extrinsic size effects in fine-grained morphotropic-phase-boundary lead zirconate titanate ceramics10.1111/j.1151-2916.1998.tb02389.x ↗
31. Ferroelectric solid solutions with morphotropic boundaries: vanishing polarization anisotropy, adaptive, polar glass, and two-phase states10.1063/1.2930883 ↗
32. The structural origin of enhanced piezoelectric performance and stability in lead free ceramics10.1039/C6EE03597C ↗
33. Electrospinning lead-free 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 nanowires and their application in energy harvesting10.1039/c3ta10792b ↗
34. Improved piezoelectric and energy harvesting characteristics in lead-free Fe2O3 modified KNN ceramics10.1007/s10832-015-9983-z ↗
35. High energy conversion efficiency in Mn-modified Ba0.9Ca0.1Ti0.93Zr0.07O3 lead-free energy harvester10.1111/jace.15396 ↗
36. Improving power density of a cantilever piezoelectric power harvester through a curved L-shaped proof mass10.1109/TIE.2009.2030761 ↗
37. High power density in a piezoelectric energy harvesting ceramic by optimizing the sintering temperature of nanocrystalline powders10.1016/j.jeurceramsoc.2017.06.053 ↗
38. Piezoelectric properties of Pb(Zr, Ti)O3-Pb(Ni, Nb)O3 ceramics and their application in energy harvesters10.1016/j.jeurceramsoc.2017.05.029 ↗
39. High-temperature BiScO3-PbTiO3 piezoelectric vibration energy harvester10.1002/adfm.201602645 ↗