journal article·2019-11

Effect of Ni content on the microstructure, mechanical properties and erosive wear of Mo2NiB2–Ni cermets

Lei Zhang, Zhifu Huang, Yangzhen Liu, Yupeng Shen, Kemin Li, Zhen Cao, Zijun Ren, Yongxin Jian

Ceramics International· Volume 45· Issue 16
Publisher page

Abstract

Abstract This work revealed the effects of Ni content on the microstructure, mechanical properties and erosive wear of Mo 2 NiB 2 –Ni cermets. Four groups of Mo 2 NiB 2 –Ni cermets with different Ni contents were fabricated by reaction boronizing sintering in this study, and their mechanical properties were tested. The results show that the microstructure of the cermets can be obviously refined with the Ni/B increasing from 0.9 to 1.2, and the cermets of Ni/B 1.1 have the best mechanical properties (hardness HRA 90.3 and fracture toughness 24.3 MPa m 1/2 ). Moreover, under high-speed slurry (artificial seawater mixed with SiO 2 sand) erosive wear, the cermets of Ni/B 0.9 and 1.0 indicate high wear rate with the aggravated eroded surfaces. However, the cermets of Ni/B 1.1 achieve the minimum wear rate with relatively complete eroded surface, which is attributed to the interaction of Mo 2 NiB 2 hard phase and Ni binder phase with appropriate ratio of two phases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Degradation mechanisms of Co-based alloy and WC metal–matrix composites for drilling tools offshore10.1016/S0043-1648(03)00151-0 ↗
2. Cr3C2–NiCr and WC–Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance10.1016/j.surfcoat.2007.06.048 ↗
3. Erosion-corrosion of low-carbon steel in the absence and presence of slurry in saline water: kinetic and mathematical views10.1007/s11668-016-0180-4 ↗
4. Erosive wear mechanism of new SiC/SiC composites by solid particles10.1007/s11249-010-9658-5 ↗
5. Synergistic erosion–corrosion behavior of Al–brass alloy at various impingement angles10.1016/j.wear.2014.07.008 ↗
6. Erosion-corrosion of copper-nickel-alloys in sea-water and other aqueous environments - literature-review10.5006/0010-9312-32.6.242 ↗
7. Erosion–corrosion bahavior of WCbased MMCs in liquid–solid slurries10.1016/j.wear.2005.02.037 ↗
8. The synergistic effect between erosion and corrosion in acidic slurry medium10.1016/0043-1648(95)07132-6 ↗
9. Review on the effects of hydrodynamic factors on erosion-corrosion
10. High tough boride base cermets produced by reaction sintering10.1016/S0254-0584(00)00442-9 ↗
11. High-strength boride base hard materials10.1006/jssc.1997.7449 ↗
12. Development and application of high strength ternary boride base cermets10.1016/j.jssc.2006.01.023 ↗
13. Development of high strength complex boride base hard materials produced by reaction boronizing sintering10.2497/jjspm.45.507 ↗
14. New multiple-boride base hard alloy
15. Effect of microstructure on the erosive wear of titanium carbide based cermets10.1016/S0043-1648(03)00198-4 ↗
16. Dry sliding tribological properties of self-mated couples of B4C-hBN ceramic composites10.1016/j.ceramint.2016.09.128 ↗
17. Erosion wear behavior of TiCN–Ni cermets containing secondary carbides(WC/NbC/TaC)10.1111/j.1551-2916.2006.01277.x ↗
18. Mechanical properties and features of erosion of cermets10.1016/S0043-1648(01)00737-2 ↗
19. Slurry erosion–corrosion wear behavior in SiC-containing NaOH solutions of Mo2NiB2 cermets prepared by reactive sintering10.1016/j.ijrmhm.2018.09.017 ↗
20. Structure/property relationships in sintered and thermally sprayed WC–Co10.1007/BF02647158 ↗
21. Reactive synthesis and mechanical properties of Mo2NiB2 based hard alloy10.1016/j.ijrmhm.2009.11.002 ↗
22. Effects of Cr on the microstructure and mechanical properties of WCoB base hard alloys10.2497/jjspm.40.38 ↗
23. Development of very high strength Mo2NiB2 complex boride base hard alloy10.1016/j.jssc.2003.03.008 ↗
24. Hardness to toughness relationship of fine-grained WC–Co hardmetals10.1016/S0263-4368(98)00028-6 ↗
25. Phase equilibria in the nickel corner of the Mo-Ni-B system at temperatures close to melting10.1007/s11106-008-9007-5 ↗
26. Exposure effects of alkaline drilling fluid on the microscale abrasion–corrosion of WC-based hardmetals10.1016/j.wear.2006.12.047 ↗
27. Erosion–corrosion behavior of Ti(C,N)-based cermets with different TiN contents10.1016/j.ijrmhm.2013.10.006 ↗
28. Effects of secondary carbides on the microstructure, mechanical properties and erosive wear of Ti(C, N)-based cermets10.1016/j.ceramint.2016.10.024 ↗
29. Hutchings · 1992
30. Microstructure/property relationships in the slurry erosion of tungsten carbide-cobalt10.1016/S0043-1648(98)00413-X ↗
31. Tribological behaviors of B4C-hBN ceramic composites used as pins or discs coupled with B4C ceramic under dry sliding condition10.1016/j.ceramint.2016.10.136 ↗
32. Cermets surface transformation under erosive and abrasive wear10.1016/j.triboint.2009.12.005 ↗
33. Erosive wear mechanism of new SiC/SiC composites by solid particles10.1007/s11249-010-9658-5 ↗
34. Experimental and simulation studies on the solid-particle erosion of WC-MgO composites10.1007/s11249-013-0237-4 ↗
35. The effect of fluid viscosity on the erosion wear behavior of Ti (C, N)-based cermets10.1016/j.ceramint.2014.10.141 ↗