Sliding wear characteristics of plasma-sprayed Cr2O3 coatings with incorporation of metals and ceramics
Source abstract
Abstract
Abstract Different additives (metals, ceramics, and metal/ceramic assembles) were incorporated into chromium oxide (Cr2O3) coatings to improve its wear resistance. The doping or co-doping effects were compared in terms of the microstructure, phase composition, microhardness and sliding wear properties of plasma-sprayed Cr2O3-7wt.% Mo, Cr2O3-7wt.% Nb2O5, Cr2O3-4wt.% MoO3-3wt.% Mo, and Cr2O3-4wt.% Nb2O5-3wt.% Mo coatings. Under the low sliding loads, the composite coatings mated with WC-Co counterparts have lower friction coefficients than those against Si3N4, which are inverse with their microhardnesses, but more obvious fatigue wear characteristics. Under the high sliding loads, Mo/Nb2O5 co-doped Cr2O3 coating (CNM) has the best wear resistance than other coatings, due to the delaying co-effects of crack formation and propagation on basis of the crack deflection and the toughening effects of Mo additives and the high hardness of Nb2O5 additives. As the reciprocating sliding loads exceed the critical stress of brittle Cr2O3-based coatings, the coating detachments occur, displaying obvious fatigue wear characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Tribological characteristics of low-pressure plasma-sprayed A12O3 coating from room temperature to 800°C10.1016/j.triboint.2004.06.004 ↗
2. Wear map of ceramics10.1016/S0043-1648(96)07363-2 ↗
3. Microstructure and tribological properties of plasma-sprayed chromium oxide–molybdenum oxide composite coatings10.1016/S0257-8972(02)00613-8 ↗
4. Stempin · 1985
5. Influence of TiO2, Cr2O3 and ZrO2 on sintering and machinability of fluorophlogopite glass ceramics10.1179/096797804X938 ↗
6. Friction and wear behaviour of plasma sprayed Cr2O3-TiO2 coating
7. Microstructural characteristics and performances of Cr2O3, and Cr2O3-15%TiO2, S-HVOF coatings obtained from water-based Suspensions10.1007/s11666-018-0687-1 ↗
8. Microstructure and mechanical properties of Al2O3–Cr2O3, composite coatings produced by atmospheric plasma spraying10.1016/j.surfcoat.2011.08.061 ↗
9. Aliofkhazraei · 2011
10. Effects of annealing on the microstructures and mechanical properties of TiN/AlN nano-multilayer films prepared by ion-beam assisted deposition10.1016/S0257-8972(01)01543-2 ↗
11. Structural characterization and mechanical properties of plasma sprayed nanostructured Cr2O3-Ag composite coatings10.1016/j.surfcoat.2013.09.033 ↗
12. TiAlN based wear resistant coatings modified by molybdenum addition10.1016/j.vacuum.2015.08.027 ↗
13. Processing of ZrC–Mo cermets for high temperature applications, part II: pressureless sintering and mechanical properties10.1111/j.1551-2916.2007.02231.x ↗
14. Influence of molybdenum composition in chromium oxide-based coatings on their tribological behavior10.1016/S0257-8972(00)00892-6 ↗
15. Tribological behavior of plasma spray coatings for marine diesel engine piston ring and cylinder liner10.1361/105994906X108611 ↗
16. Effects on performance of Cr2O3, layers produced on Mo/cast-iron materials10.1016/S0257-8972(03)00361-X ↗
17. Correlation between microstructure, chemical components and tribological properties of plasma-sprayed Cr2O3-based coatings10.1016/j.ceramint.2018.03.004 ↗
18. Surface modifications for improved wear performance in artificial Joints: a review
19. Influence of TiO2 content on the mechanical and tribological properties of Cr2O3-based coating10.1016/j.matdes.2015.09.085 ↗
20. Studies of the correlation between wear behaviour and bonding strength in two types of ceramic coating10.1023/A:1004477824530 ↗
21. Predicting splat morphology in a thermal spray process10.1016/j.surfcoat.2007.03.010 ↗
22. Comparison between plasma- and HVOF-sprayed ceramic coatings, part I: microstructure and mechanical properties10.1504/IJSURFSE.2007.013620 ↗
23. Determination of optical and mechanical properties of Nb2O5 thin films for solar cells application10.1016/j.apsusc.2014.01.144 ↗
24. MoO3 films grown on polycrystalline Cu: morphological, structural, and electronic properties
25. Czichos · 1978
26. Gohar · 1980
27. Comparison between plasma- and HVOF-sprayed ceramic coatings, part II: tribological behavior10.1504/IJSURFSE.2007.013621 ↗
28. Microstructure and properties of Cr2O3, coating deposited by plasma spraying and dry-ice blasting10.1016/j.surfcoat.2013.03.016 ↗
29. Formation of smooth wear surfaces on alumina ceramics by embedding and tribo-sintering of fine wear particles10.1016/S0043-1648(00)00468-3 ↗
30. 1993
31. Influence of microstructure on the wear and corrosion behavior of detonation sprayed Cr2O3-Al2O3 and plasma sprayed Cr2O3 coatings10.1016/j.ceramint.2017.10.203 ↗