Low carbon containing Al2O3-C refractories with nanocarbon as the sole carbon source
Source abstract
Abstract
Abstract The functional refractories used in the continuous casting process of steel are mostly made up of alumina (Al2O3) - carbon (C) system. Graphite is used as the main carbon source because of the properties it offered. Generally, these refractories contain about 30% residual carbon after coking. But the use of high carbon content leads to several disadvantages like carbon pickup by steel, high heat loss and generation of higher extent of COx gases, etc. Hence, the development of low carbon Al2O3-C refractories without conceding any beneficial properties is the challenge to the refractory technologists. Such a challenge is intended in current study with the use of nanocarbon as a complete alternative for graphite. The variation in physical, mechanical and thermo-mechanical properties with variation in amount of nanocarbon in the composition is studied. Phase analysis and microstructural developments are also evaluated along with the oxidation resistance at different temperatures. Because of its high reactivity, nanocarbon helps to form in-situ ceramic phases at much lower temperatures thereby enhances strength and other properties. But the increase in amount of nanocarbon above 2% found to deteriorate the properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Study on the nanocarbon containing Al2O3 – C continuous casting refractories with reduced fixed carbon content10.1016/j.jallcom.2018.12.002 ↗
2. Nanocarbon containing Al2O3 – C continuous casting refractories: effect of graphite content10.1016/j.jallcom.2017.11.324 ↗
3. Effect of the reactivity and porous structure of expanded graphite (EG) on microstructure and properties of Al2O3–C refractories10.1016/j.jallcom.2015.05.124 ↗
4. Dissolution of carbon from alumina-carbon mixtures into liquid iron: influence of carbonaceous materials10.1007/s11663-006-0046-3 ↗
5. Effect of ceramic bonding phases on the thermo-mechanical properties of Al2O3 –C refractories10.1016/j.ceramint.2013.01.024 ↗
6. Microstructures and mechanical properties of Al2O3–C refractories with addition of microcrystalline graphite10.1016/j.ceramint.2014.03.139 ↗
7. Effect of spinel content on the properties of Al2O3–SiC–C based trough castable10.1016/j.ceramint.2015.10.081 ↗
8. Sarkar · 2016
9. The influence of nanoparticles and functional metallic additions on the thermal shock resistance of carbon bonded alumina refractories10.1016/j.ceramint.2014.09.090 ↗
10. Study on low carbon containing MgO-C refractory: use of nano carbon10.1016/j.ceramint.2011.10.086 ↗
11. Effect of different metal powder anti-oxidants on N220 nano carbon containing low carbon MgO-C refractory: an in-depth investigation10.1016/j.ceramint.2016.08.185 ↗
12. Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes10.1016/j.msea.2012.04.001 ↗
13. Microstructures and mechanical properties of Al2O3–C refractories with silicon additive using different carbon sources10.1016/j.msea.2010.12.066 ↗
14. Nano carbon containing MgO-C refractory: effect of graphite content10.1016/j.ceramint.2012.02.082 ↗
15. Study on variation of graphite content in N220 nanocarbon containing low carbon MgO–C refractory10.1179/1743281215Y.0000000057 ↗
16. Strengthening mechanism of graphene oxide nanosheets for Al2O3–C refractories10.1016/j.ceramint.2013.05.117 ↗
17. Microstructures and mechanical properties of Al2O3–C refractories using nickel-loaded ultrafine microcrystalline graphite and silicon additives10.1016/j.ceramint.2014.07.104 ↗
18. Low-carbon carbon-bonded alumina refractories for functional components in steel technology
19. Effect of mixing on the properties of nanocarbon containing Al2O3 ‐C continuous casting refractories
20. Thermochemistry and microstructures of MgO–C refractories containing various antioxidants10.1016/S0955-2219(00)00308-3 ↗
21. Carbon based refractories10.2109/jcersj.112.517 ↗
22. Oxidation behaviour of boron carbide powder10.1016/j.msea.2006.08.068 ↗
23. Effects of B4C Addition on Thermo-Mechanical properties of Al-Si incorporated low carbon Al2O3 -C slide plate materials
24. Antioxidation behavior and effect of Al8B4C7 added to carbon-containing refractories10.2109/jcersj.108.1261_818 ↗
25. The effect of additives on the properties and microstructures of Al2O3-C refractories10.1007/s10853-006-6770-x ↗
26. In situ formation of carbon nanotubes and ceramic whiskers in Al2O3–C refractories with addition of Ni-catalyzed phenolic resin10.1016/j.msea.2012.08.044 ↗
27. Microstructure and mechanical properties of multi-walled carbon nanotubes containing Al2O3–C refractories with addition of polycarbosilane10.1016/j.ceramint.2012.11.075 ↗
28. Low-carbon magnesia-carbon refractory: use of N220 nanocarbon black10.1111/ijac.12324 ↗
29. The application of the Nano structural matrix to MgO-C bricks