journal article·2020-08

Mechanical and thermal properties of multiwalled carbon-nanotube-reinforced Al2O3 nanocomposites

C. Guo, X. Luo, W.A. Shah, J.K. Li, B. Huang, M.A. Umer, Y.Q. Yang

Ceramics International· Volume 46· Issue 11
Publisher page

Abstract

Abstract Multiwalled carbon nanotube (MWCNT)-reinforced Al2O3-matrix nanocomposites were obtained by wet ball milling composite powders and spark plasma sintering. The mechanical and thermal properties of the nanocomposites with five different MWCNT concentrations from 0 to 2.0 wt% were studied. Results show that the matrix grain sizes of the composites decreased after MWCNT addition. The hardness, bending strength, and fracture toughness of 0.5 wt% MWCNT nanocomposite are the highest, which are 35.7%, 55%, and 182% higher than those of monolithic alumina, respectively. Errors of fracture toughness values obtained by the single-edge notch beam method are significantly smaller than those measured by the direct crack measurement method. With the addition of MWCNTs, the thermal conductivity of the nanocomposites decreases gradually, reaching the minimum of 12 W/mK in 2.0 wt% MWCNT composite at 300 °C. The thermal conductivity decreased owing to the agglomeration of MWCNTs and changes in the porosity and grain size of the composite matrix. No distinct difference is observed in thermal expansion behaviours between the nanocomposites and monolithic Al2O3 owing to the low content of MWCNTs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Carbon Nanotubes in Composites · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Mechanical properties and thermal conductivities of 3YSZ-toughened fully stabilized HfO2 ceramics10.1016/j.ceramint.2019.03.208 ↗
2. Mechanical and thermal properties of Cf/SiC composites reinforced with carbon nanotube grown in situ10.1016/j.ceramint.2012.08.072 ↗
3. Preparation and mechanical properties of carbon nanotubes reinforced Al2O3/TiC composites
4. Electrically conductive alumina–carbon nanocomposites prepared by Spark Plasma Sintering10.1016/j.jeurceramsoc.2009.05.045 ↗
5. Carbon nanotube buckypaper-reinforced SiCN ceramic matrix composites of superior electrical conductivity10.1016/j.jeurceramsoc.2016.02.045 ↗
6. Effects of CNTs content on microstructure and mechanical properties of Cnt/α-Al2O3 and Cnt-Csf/α-Al2O3 composites10.1016/j.ceramint.2019.06.253 ↗
7. Tensile, microhardness, and microstructural analysis on Mg-CNT nano composites
8. Reinforcing capability of multiwall carbon nanotubes in alumina ceramic hybrid nanocomposites containing zirconium oxide nanoparticles10.1016/j.ijrmhm.2019.105018 ↗
9. Spark plasma sintering of ceramic matrix composite based on alumina, reinforced by carbon nanotubes10.1088/1757-899X/286/1/012034 ↗
10. Synergistic effect of hybrid carbon nanotube and graphene nanoplateletsreinforcement on processing, microstructure, interfacial stress and mechanical properties of Al2O3 nanocomposites10.1016/j.ceramint.2017.10.160 ↗
11. Thermophysical properties of high-frequency induction heat sintered graphene nanoplatelets/alumina ceramic functional nanocomposites10.1007/s11665-018-3395-6 ↗
12. Structural properties and mechanical behavior of SWCNTs and MWCNTs reinforced Al2O3 fabricated by spark plasma sintering10.1016/j.ceramint.2019.05.101 ↗
13. Mechanical and tribological properties of alumina-MWCNTs composites sintered by rapid hot-pressing10.1016/j.jeurceramsoc.2017.05.047 ↗
14. Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites10.1016/j.ceramint.2018.10.187 ↗
15. A new structure for multi-walled carbon nanotubes reinforced alumina nanocomposite with high strength and toughness10.1016/j.matlet.2007.06.025 ↗
16. Mechanical and tribological properties of alumina-MWCNTs composites sintered by rapid hot-pressing10.1016/j.jeurceramsoc.2017.05.047 ↗
17. Effect of sintering temperature on a single-wall carbon nanotube-toughened alumina-based nanocomposite10.1016/j.scriptamat.2007.02.007 ↗
18. Intragranular carbon nanotubes in alumina-based composites for reinforced ceramics10.1007/s10971-018-4834-4 ↗
19. Carbon nanotube composites for thermal management10.1063/1.1469696 ↗
20. Carbon nanotubes--the route toward applications10.1126/science.1060928 ↗
21. Thermal properties of CNT-Alumina nanocomposites10.1016/j.compscitech.2008.04.001 ↗
22. Mechanical strength of nitrogen-doped silicon single crystal investigated by three-point bending method10.1016/S0921-4526(01)00720-7 ↗
23. A critical evaluation of indentation technique for measuring fracture toughness: I, direct crack method10.1111/j.1151-2916.1981.tb10320.x ↗
24. ASTM E399 · 1991
25. On the measurement of ceramic fracture toughness using single edge notched beams10.1016/j.jeurceramsoc.2015.05.005 ↗
26. A novel structure for carbon nanotube reinforced alumina composites with improved mechanical properties10.1088/0957-4484/19/31/315708 ↗
27. Carbon nanotube toughened aluminium oxide nanocomposite10.1016/j.jeurceramsoc.2009.09.032 ↗
28. Graphene and carbon nanotube (GNT)-reinforced alumina nanocomposites10.1016/j.jeurceramsoc.2014.08.043 ↗
29. Determination of grain size by XRD profile analysis and TEM counting in nano-structured Cu10.1016/j.jallcom.2008.08.075 ↗
30. The production of advanced fine-grained alumina by carbon nanotube addition10.1016/j.jeurceramsoc.2011.07.011 ↗
31. Pressureless sintering of carbon nanotube–Al2O3 composites10.1016/j.jeurceramsoc.2009.12.005 ↗
32. Spark plasma sintering of multi-, single/double- and single-walled carbon nanotube-reinforced alumina composites: is it justifiable the effort to reinforce them?10.1016/j.ceramint.2015.09.060 ↗
33. Effect of high SWNT content on the room temperature mechanical properties of fully dense 3YTZP/SWNT composites10.1016/j.jeurceramsoc.2013.12.024 ↗
34. Microstructure and properties of carbon nanotube/zirconia composite10.1016/j.jeurceramsoc.2007.09.011 ↗
35. Microstructure-toughening relation in alumina based multiwall carbon nanotube ceramic composites10.1016/j.jeurceramsoc.2014.08.044 ↗
36. A comprehensive analysis of mechanical characteristics of carbon nanotube-metal matrix nanocomposites10.1016/j.msea.2017.06.066 ↗
37. Thermal expanding behavior of carbon nanotube-reinforced metal matrix nanocomposites-A micromechanical modeling10.1016/j.jallcom.2018.02.100 ↗
38. Strength and breaking mechanism of multiwalled Carbon nanotubes under tensile load10.1126/science.287.5453.637 ↗
39. Critical notch-root radius effect in SENB-S fracture toughness testing10.1016/0955-2219(95)00197-2 ↗
40. Indentation fracture resistance vs conventional fracture toughness of carbon nanotube/alumina nanocomposites10.1007/s11661-015-3086-y ↗
41. In situ direct observation of toughening in isotropic nanocomposites of alumina ceramic and multiwall carbon nanotubes10.1016/j.actamat.2017.01.024 ↗
42. Well-dispersed carbon nanotubes for greatly enhanced mechanical properties of alumina-based composites10.1007/s11148-017-0079-y ↗
43. Improvement of flexure strength and fracture toughness in alumina matrix composites reinforced with carbon nanotubes10.1016/j.msea.2009.04.035 ↗
44. Carbon nanotube reinforced alumina-based ceramics with novel mechanical, electrical, and thermal properties10.1111/j.1744-7402.2004.tb00166.x ↗
45. Heat capacity of carbon nanotubes10.1016/0038-1098(96)00386-9 ↗
46. Electrical conductivity and thermal properties of spark plasma sintered Al2O3-SiC-CNT hybrid nanocomposites10.1016/j.ceramint.2017.01.112 ↗
47. Theory of thermal conductance in carbon nanotube composites10.1016/j.physleta.2005.11.086 ↗
48. Unusually high thermal conductivity of carbon nanotubes10.1103/PhysRevLett.84.4613 ↗
49. Polyethylene multiwalled carbon nanotube composites10.1016/j.polymer.2005.06.094 ↗
50. Carbon nanotube composites for thermal management10.1063/1.1469696 ↗
51. Engineering strong intergraphene shear resistance in multi-walled carbon nanotubes and dramatic tensile improvements10.1002/adma.200902140 ↗
52. Thermal conductivity of dense and porous Yttria-Stabilized Zirconia10.1023/A:1017970924312 ↗
53. The thermal expansion behavior of unidirectional SiC fiber-reinforced Cu–matrix composites10.1016/j.scriptamat.2007.10.022 ↗
54. Thermal expansion of a composite of single-walled carbon nanotubes and nanocrystalline aluminum10.1016/j.carbon.2004.07.024 ↗
55. Thermal expansion behaviors of aluminum composite reinforced with carbon nanotubes10.1016/j.matlet.2007.11.086 ↗
56. Comparative investigation into surface charged multi-walled carbon nanotubes reinforced Cu nanocomposites for interconnect applications10.1016/j.compositesb.2016.03.086 ↗
57. Carbon nanotube and in-situ titanium carbide reinforced titanium diboride matrix composites synthesized by reactive spark plasma sintering10.1016/j.msea.2016.03.098 ↗