Optoelectronic properties of Ti3C2Tx MXene transparent conductive electrodes: Microwave synthesis of parent MAX phase
Source abstract
Abstract
Abstract Herein, we evaluated the structural and optoelectronic properties of Ti3C2Tx MXene transparent conductive electrodes (TCEs) prepared from microwave synthesized Ti3AlC2 MAX phase. A mixture of Ti, Al, and C was heated at 1300 °C for 30 min in a microwave oven. We synthesized MXene by two different etchant concentrations. A 1.6 g LiF in 9 M HCl solution brought about a higher degree of delamination in MXene with an inter-layer space of 1.35 nm Ti3C2Tx MXene prepared from microwave synthesized MAX phase exhibited a lateral size of ~80 nm with crystalline defects. We examined the effect of spinning speed on optoelectronic properties of Ti3C2Tx MXene TCEs. Increasing the spinning speed from 1000 to 4000 resulted in an increase in transparency (T550) (from 72% to around 94%) and sheet resistance (Rs) (from 2010 to 23660Ω/sq). A FoM value of 2.027 ± 0.163 was calculated from data fitting of T550 vs. Rs (R2 > 0.97). It is suggested that small sheet size and formation of defects are responsible for the relatively high Rs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · 2D Materials and Applications · Advanced Memory and Neural Computing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. 2019
2. MXenes—a new class of 2D layered materials: synthesis, properties, applications as supercapacitor electrode and beyond
3. Introduction to MXenes: synthesis and characteristics, Mater
4. Stamping of flexible, coplanar micro-supercapacitors using MXene inks
5. Metallic Ti3C2Tx MXene gas sensors with ultrahigh signal-to-noise ratio10.1021/acsnano.7b07460 ↗
6. Porous Ti 3 C 2 T x MXene for ultrahigh-rate sodium-ion storage with long cycle life10.1021/acsanm.8b00045 ↗
7. Graphene and MXene-based transparent conductive electrodes and supercapacitors10.1016/j.ensm.2018.05.003 ↗
8. Transparent, flexible, and conductive 2D titanium carbide (MXene) films with high volumetric capacitance
9. Synthesis of Ti 3 AlC 2 ceramic by high-energy ball milling of elemental powders of Ti , Al and C
10. Fabrication of high-purity ternary carbide Ti3AlC2 by spark plasma sintering (SPS) technique10.1016/j.ceramint.2006.04.018 ↗
11. Layered machinable and electrically conductive Ti 2 AlC and Ti 3 AlC 2 Ceramics : a review10.1016/S1005-0302(10)60064-3 ↗
12. Synthesis and microwave absorption of Ti3C2Tx MXene with diverse reactant concentration, reaction time, and reaction temperature10.1016/j.ceramint.2019.08.071 ↗
13. Synthesis, structure, properties and applications of MXenes: current status and perspectives10.1016/j.ceramint.2019.06.114 ↗
14. Ultrasonic assisted etching and delaminating of Ti 3 C 2 Mxene10.1016/j.ceramint.2018.01.147 ↗
15. Electronic and optical properties of 2D transition metal carbides and nitrides (MXenes)10.1002/adma.201804779 ↗
16. Formation of new MXene film using spinning coating method with DMSO solution and its application in advanced memristive device10.1016/j.ceramint.2019.06.202 ↗
17. Fabrication of Ti3C2Tx MXene transparent thin films with tunable optoelectronic properties10.1002/aelm.201600050 ↗
18. Microwave versus conventional sintering: a review of fundamentals, advantages and applications10.1016/j.jallcom.2010.01.068 ↗
19. Low temperature synthesis of single-phase Ti3AlC2 through reactive sintering Ti/Al/C powders10.1016/j.msea.2007.04.009 ↗
20. Microwave-assisted sintering of zircon10.1016/j.jallcom.2007.02.032 ↗
21. Synthesis and formation mechanism of high-purity Ti3AlC2 powders by microwave sintering10.1111/ijac.13452 ↗
22. Synthesis of high-purity Ti3SiC2 by microwave sintering10.1111/ijac.12065 ↗
23. Microwave sintering of Ti3Si(Al)C2 ceramic10.1111/jace.13037 ↗
24. Conductive transparent V2CTx (MXene) films10.1016/j.flatc.2018.03.001 ↗
25. Synthesis of Ti3AlC2 ceramic by high-energy ball milling of elemental powders of Ti
26. Li · 2007 · vol. 33 · 169
27. Energy- and cost-efficient NaCl-assisted synthesis of MAX-phase Ti3AlC2 at lower temperature10.1016/j.ceramint.2018.09.162 ↗
28. Mechanochemical synthesis mechanism of Ti 3 AlC 2 MAX phase from elemental powders of Ti , Al and C10.1016/j.apt.2016.06.008 ↗
29. One-step synthesis for cations intercalation of two-dimensional carbide crystal Ti3C2 MXene
30. Highly safe and ionothermal synthesis of Ti3C2 MXene with expanded interlayer spacing for enhanced lithium storage10.1016/j.jechem.2019.11.029 ↗
31. Synthesis and properties of 2D-titanium carbide MXene sheets towards electrochemical energy storage applications10.1016/j.ceramint.2017.07.003 ↗
32. Synthesis, properties and performance evaluation of vanadium carbide MXene as supercapacitor electrodes10.1016/j.ceramint.2019.10.283 ↗
33. Conductive two-dimensional titanium carbide “clay” with high volumetric capacitance10.1038/nature13970 ↗
34. Two-Dimensional, ordered, double transition metals carbides (MXenes)10.1021/acsnano.5b03591 ↗
35. New two-dimensional niobium and vanadium carbides as promising materials for Li-ion batteries10.1021/ja405735d ↗
36. Synthesis and characterization of two-dimensional Nb4C3 (MXene)
37. Control of MXenes' electronic properties through termination and intercalation10.1038/s41467-018-08169-8 ↗
38. Recent development of carbon nanotube transparent conductive films10.1021/acs.chemrev.6b00179 ↗
39. Solution-processed titanium carbide MXene films examined as highly transparent conductors10.1039/C6NR03682A ↗