journal article·2021-11

High performance tribological coatings on a secondary cast Al–Si alloy generated by Plasma Electrolytic Oxidation

P. Fernández-López, S.A. Alves, A. López-Ortega, J.T. San José-Lombera, R. Bayón

Ceramics International· Volume 47· Issue 22
Publisher page

Abstract

Due to their outstanding properties, including low density or high-strength-to-weight ratio, cast Al–Si alloys are attractive materials. Nevertheless, their low wear and corrosion resistance still remain a critical issue for several applications. The present work is focused on the obtention of PEO coatings on a secondary cast Al–Si alloy (EN AC-46500) and the in-depth study of the properties derived from the use of two developed aluminate-based electrolytes. All the obtained PEO coatings have been characterized in terms of their thickness and roughness, morphology, and composition. Reciprocal wear tests have been performed in order to evaluate the tribological behavior of the PEO layers, while their anti-corrosion properties have been analyzed throughout Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy. Our findings suggest that the aluminate-based electrolytes led to an increase in coating thickness of density, while providing a notable improvement on the surface hardness in comparison with the uncoated Al–Si alloy. All the PEO coatings tested exhibited excellent wear resistance and an improved anti-corrosion behavior compared with the uncoated Al–Si alloy. Furthermore, K2TiF6-containing electrolyte promoted the obtention of PEO coatings that provided the highest protection against wear and corrosion to the cast Al–Si alloy treated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. The characterization of oxide based ceramic coating synthesized on Al-Si binary alloys by microarc oxidation10.1016/j.surfcoat.2014.12.031 ↗
2. Application of cast Al-Si alloys in internal combustion engine components10.1179/1743280413Y.0000000027 ↗
3. Classification and reactivity of secondary aluminum production waste10.1061/(ASCE)HZ.2153-5515.0000223 ↗
4. Preparation of aluminum alloy from recycling cans wastes
5. Preparation and melting of scrap in aluminum recycling: a review10.3390/met8040249 ↗
6. Effect of solution heat treatment on gas porosity and mechanical properties in a die cast step test part manufactured with a new AlSi10MnMg(Fe) secondary alloy10.1016/j.msea.2016.05.024 ↗
7. Characterization of high-pressure die-cast hypereutectic Al-Si alloys based on microstructural distribution and fracture morphology10.1016/j.jmst.2018.12.005 ↗
8. The influence of T6 treatment on fracture behavior of hypereutectic Al-Si HPDC casting alloy10.1016/j.jallcom.2017.10.074 ↗
9. Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting10.1016/j.jallcom.2019.04.017 ↗
10. Factors that affect the properties of additively-manufactured AlSi10Mg: porosity versus microstructure
11. Additive manufactured versus cast AlSi10Mg alloy: microstructure and micromechanics10.1016/j.rinma.2021.100178 ↗
12. Oxides , porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting10.1016/j.ijfatigue.2016.06.002 ↗
13. The mechanism of PEO process on Al-Si alloys with the bulk primary silicon10.1016/j.apsusc.2009.07.090 ↗
14. Tribocorrosion behavior of calcium- and phosphorous-enriched titanium oxide films and study of osteoblast interactions for dental implants10.1007/s40735-015-0023-y ↗
15. Growth mechanism and corrosion behavior of ceramic coatings on aluminum produced by autocontrol AC pulse PEO10.1016/j.surfcoat.2008.03.031 ↗
16. Effect of duty cycle and applied current frequency on plasma electrolytic oxidation (PEO) coating growth behavior10.1016/j.surfcoat.2013.03.041 ↗
17. Influence of secondary phases of AlSi9Cu3 alloy on the plasma electrolytic oxidation coating formation process10.1016/j.jmst.2019.12.031 ↗
18. Electrochemically-induced TiO2 incorporation for enhancing corrosion and tribocorrosion resistance of PEO coating on 7075 Al alloy10.1016/j.corsci.2018.08.037 ↗
19. Plasma electrolytic oxidation ceramic coatings proceed by porous anodic film10.1016/j.jallcom.2019.152098 ↗
20. A mechanism for the growth of a plasma electrolytic oxide coating on Al10.1016/j.electacta.2016.04.186 ↗
21. Phase transformation in plasma electrolytic oxidation coatings on 6061 aluminum alloy10.1016/j.surfcoat.2014.04.010 ↗
22. Silicon effects on formation of EPO oxide coatings on aluminum alloys10.1016/j.tsf.2005.07.184 ↗
23. Influence of surface etching pretreatment on PEO process of eutectic Al-Si alloy10.1016/j.cjche.2015.06.004 ↗
24. PEO of pre-anodized Al-Si alloys: corrosion properties and influence of sealings10.1016/j.apsusc.2015.03.206 ↗
25. Preparation of black PEO layers on Al-Si alloy and the colorizing analysis10.1016/j.vacuum.2014.10.008 ↗
26. Formation of uniform passive oxide layers on high Si content Al alloy by plasma electrolytic oxidation10.1016/j.jallcom.2010.02.074 ↗
27. Influence of silicon on growth mechanism of micro-arc oxidation coating on cast Al–Si alloy10.1098/rsos.172428 ↗
28. Plasma electrolytic oxidation of magnesium and its alloys: mechanism, properties and applications10.1016/j.jma.2017.02.004 ↗
29. Microstructure and corrosion properties of PEO coatings produced on am-aluminum alloys10.4028/www.scientific.net/KEM.813.298 ↗
30. Improvement to corrosion resistance of MAO coated 2519 aluminum alloy by formation of polypropylene film on its surface10.1016/j.surfcoat.2013.06.073 ↗
31. Preparation of anti-corrosion films by microarc oxidation on an Al-Si alloy10.1016/j.apsusc.2007.01.018 ↗
32. Growth process and wear resistance for ceramic coatings formed on Al-Cu-Mg alloy by micro-arc oxidation10.1016/j.apsusc.2005.12.156 ↗
33. Effects of alloying elements on microstructure and protective properties of Al2O3 coatings formed on aluminum alloy substrates by plasma electrolysis10.1016/j.surfcoat.2009.07.002 ↗
34. Characterization of plasma electrolytic oxidation coating on low carbon steel prepared from silicate electrolyte with Al nanoparticles10.1016/j.ceramint.2017.09.084 ↗
35. A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals10.1080/09506608.2018.1466492 ↗
36. Influence of electrolyte ageing on the plasma electrolytic oxidation of aluminium10.1016/j.surfcoat.2014.11.001 ↗
37. Effect of different electrolyte systeme on the formation of mico-arc oxidationceramic coatings of 6061 aluminium alloy
38. Effect of electrolyte composition on morphology and corrosion resistance of plasma electrolytic oxidation coatings on aluminized steel10.1016/j.surfcoat.2019.05.047 ↗
39. Mullite-rich plasma electrolytic oxide coatings for thermal barrier applications10.1016/j.surfcoat.2006.06.050 ↗
40. Growth regularity of ceramic coatings formed by microarc oxidation on Al-Cu-Mg alloy10.1016/S0040-6090(00)01026-9 ↗
41. Effect of NaOH on the structure and corrosion performance of alumina and silica PEO coatings on aluminum10.1007/s11665-012-0151-1 ↗
42. Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology10.1016/S0257-8972(02)00918-0 ↗
43. High growth rate, wear resistant coatings on an Al–Cu–Li alloy by plasma electrolytic oxidation in concentrated aluminate electrolytes10.1016/j.surfcoat.2014.12.078 ↗
44. Wear and corrosion resistant coatings on surface of cast A356 aluminum alloy by plasma electrolytic oxidation in moderately concentrated aluminate electrolytes10.1016/S1003-6326(17)60038-4 ↗
45. Fabrication of multifunctional black PEO coatings on AA7075 for spacecraft applications10.1016/j.surfcoat.2016.09.043 ↗
46. Influence of K 2TiF 6 in electrolyte on characteristics of the microarc oxidation coating on aluminum alloy10.1016/j.cap.2012.03.003 ↗
47. High-corrosion resistance of the microarc oxidation coatings on magnesium alloy obtained in potassium fluotitanate electrolytes10.1016/j.surfcoat.2015.01.013 ↗
48. Effect of various additives on morphology and corrosion behavior of ceramic coatings developed on AZ31 magnesium alloy by plasma electrolytic oxidation10.1016/j.ceramint.2012.02.040 ↗
49. Effect of K2TiF6 and Na2B4O7 as electrolyte additives on pore morphology and corrosion properties of plasma electrolytic oxidation coatings on ZM21 magnesium alloy10.1016/j.surfcoat.2013.01.056 ↗
50. Fernandez Lopez · 2021
51. Plasma electrolytic oxidation of Ti-25Nb-xTa alloys in solution containing Ca and P ions10.1016/j.surfcoat.2020.125916 ↗
52. Optimization of surface properties of plasma electrolytic oxidation coating by organic additives: a review10.3390/coatings11040374 ↗
53. De Engenharia · 2017
54. Characteristic of ceramic coatings on aluminum by plasma electrolytic oxidation in silicate and phosphate electrolyte10.1016/j.apsusc.2006.06.036 ↗
55. Effect of iron and manganese contents on convection-free precipitation and sedimentation of primary α-Al(FeMn)Si phase in liquid Al-11.5Si-0.4Mg alloy10.1023/B:JMSC.0000019991.70334.5f ↗
56. Predicting the formation of intermetallic phases in the Al-Si-Fe system with Mn additions10.1007/s11669-017-0542-y ↗
57. In-situ study of morphology and growth of primary α-Al(FeMnCr)Si intermetallics in an Al-Si alloy10.1016/j.actamat.2017.03.026 ↗
58. The effect of iron and manganese on the formation of intermetallic compounds in aluminum-silicon alloys10.1016/S0921-5093(04)00832-9 ↗
59. Correlation between plasma electrolytic oxidation treatment stages and coating microstructure on aluminum under unipolar pulsed DC mode10.1016/j.surfcoat.2014.11.007 ↗
60. Plasma electrolytic oxidation of A1050 aluminium alloy in homogeneous silicate-alkaline electrolytes with edta4- complexes of Fe, Co, Ni, Cu, la and Ba under alternating polarization conditions10.1016/j.matchemphys.2015.10.020 ↗
61. Evolution process of the plasma electrolytic oxidation (PEO) coating formed on aluminum in an alkaline sodium hexametaphosphate ((NaPO3)6) electrolyte10.1016/j.jallcom.2019.05.253 ↗
62. Formation of a metastable nanostructured mullite during Plasma Electrolytic Oxidation of aluminium in “soft” regime condition10.1016/j.matdes.2019.107977 ↗
63. An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing10.1016/j.electacta.2013.08.137 ↗
64. The mechanism of evolution of microdischarges at the beginning of the PEO process on aluminum10.1016/j.surfcoat.2016.04.044 ↗
65. Plasma electrolytic oxidation induced ‘local over-growth’ characteristic across substrate/coating interface: effects and tailoring strategy of individual pulse energy10.1016/j.surfcoat.2018.02.091 ↗
66. Plasma electrolytic oxidation of an Al-Cu-Li alloy in alkaline aluminate electrolytes: a competition between growth and dissolution for the initial ultra-thin films10.1016/j.electacta.2014.06.122 ↗
67. The influence of surface roughness on wear10.1016/0043-1648(75)90074-5 ↗
68. Effect of surface roughness on tribological properties of TiB2/Al composites10.1016/j.matdes.2013.06.038 ↗
69. Influence of electrolyte components on the microstructure and growth mechanism of plasma electrolytic oxidation coatings on 1060 aluminum alloy10.1016/j.surfcoat.2019.125214 ↗
70. Use of waste foundry sand (WFS) to produce protective coatings on aluminum alloy by plasma electrolytic oxidation10.1016/j.jclepro.2019.03.013 ↗
71. Erosion and corrosion resistance of plasma electrolytic oxidized 6082 aluminum alloy surface at low and high temperatures10.1016/j.jmrt.2019.02.017 ↗
72. Başoğul · 2018 · 177
73. Evaluation of residual stress levels in plasma electrolytic oxidation coatings using a curvature method10.1016/j.surfcoat.2014.11.006 ↗
74. On the PEO treatment of cold sprayed 7075 aluminum alloy and its effects on mechanical, corrosion and dry sliding wear performances thereof10.1016/j.surfcoat.2019.125271 ↗
75. Effects of fluoride on the structure and properties of microarc oxidation coating on aluminium alloy10.1016/j.jallcom.2010.06.027 ↗
76. Corrosion performance of plasma electrolytic oxidation grown oxide coating on pure aluminum: effect of borax concentration10.1016/j.jmrt.2020.06.020 ↗