Preparation of graphene supported flower-like porous 3D ZnO–NiO ternary composites for high capacity anode materials for Li-ion batteries
Source abstract
Abstract
Abstract Flower-like ZnO–NiO mesoporous architectures were synthesized through annealing the zinc hydroxide carbonate–nickel hydroxide carbonate composite precursor, which was prepared via a one-pot hydrothermal route. More importantly, we successfully prepared flower-like porous ZnO–NiO/graphene composites by introducing flexible graphene into the flower-like porous ZnO–NiO. In addition, we explore the application of the 3D flower-like ZnO–NiO composite mesoporous architectures and flower-like porous ZnO–NiO/graphene composites as anode materials for lithium ion battery. Electrochemical study presented that the as-prepared flower-like porous ZnO–NiO/graphene composites demonstrate excellent electrochemical performance and cycling stability. The first discharge capacity is 1205.7 mA h/g at a high current density of 300 mA/g. After 50 cycles, the reversible capacity is 452.7 mA h/g at a current density of 300 mA/g and the coulomb efficiency reaches at 99%.The improved electrochemical performances are mainly attributed to its morphological characteristics of mesoporous, nanosheet self-assembling architectures, as well as the addition of graphene. These results suggest that such 3D flower-like porous ZnO–NiO/graphene composites are promising materials for lithium ion battery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. The anodic behavior of planar and porous zinc electrodes in alkaline electrolyte10.1149/1.3387672 ↗
2. Preparation of carbon-encapsulated ZnO tetrahedron as an anode material for ultralong cycle life performance lithium-ion batteries10.1016/j.electacta.2014.09.038 ↗
3. MOF-derived cobalt-doped ZnO@C composites as a high-performance anode material for lithium-ion batteries10.1021/am5046873 ↗
4. Electrochemical performances of Ni-coated ZnO as an anode material for lithium-ion batteries10.1149/1.2400609 ↗
5. Mesoporous ZnO nanosheets for lithium ion batteries10.1016/j.matlet.2014.02.012 ↗
6. Microwave-assisted synthesis of porous nickel oxide nanostructures as anode materials for lithium-ion batteries10.1007/s12598-011-0238-0 ↗
7. The morphology evolution of nickel phosphite hexagonal polyhedrons and their primary electrochemical capacitor applications10.1002/ppsc.201200147 ↗
8. Controllable synthesis and magnetic properties of cubic and hexagonal phase nickel nanocrystals10.1002/adma.200601460 ↗
9. Controllable synthesis of hexagonal WO3 nanostructures and their application in lithium batteries10.1088/0022-3727/41/15/155417 ↗
10. Controllable synthesis of hollow Si anode for long-cycle-life lithium-ion batteries10.1002/adma.201400578 ↗
11. Controllable synthesis of SnO2@C yolk–shell nanospheres as a high-performance anode material for lithium ion batteries10.1039/C3NR06452B ↗
12. Fabrication of porous carbon nanofibers and their application as anode materials for rechargeable lithium-ion batteries10.1088/0957-4484/20/15/155705 ↗
13. Pillow-shaped porous CuO as anode material for lithium-ion batteries10.1016/j.inoche.2010.09.025 ↗
14. Preparation of graphene supported porous Si@C ternary composites and their electrochemical performance as high capacity anode materials for Li-ion batteries10.1016/j.ceramint.2015.03.060 ↗
15. Enhanced rate capability of multi-layered ordered porous nickel phosphide film as anode for lithium ion batteries10.1016/j.jpowsour.2010.06.068 ↗
16. Hollow microspheres of NiO as anode materials for lithium-ion batteries10.1016/j.electacta.2010.08.039 ↗
17. Dandelion-like hollow microspheres of CuO as anode material for lithium-ion batteries10.1016/j.scriptamat.2007.04.034 ↗
18. CuO/graphene composite as anode materials for lithium-ion batteries10.1016/j.electacta.2010.11.036 ↗
19. A facile synthesis of graphite/silicon/graphene spherical composite anode for lithium-ion batteries10.1016/j.electacta.2013.04.083 ↗
20. Toward single-DNA Electrochemical biosensing by graphene nanowalls10.1021/nn300261t ↗
21. Ultra sensitive detection of leukemia by graphene10.1039/C4NR04589K ↗
22. Graphene anchored with Co3O4 nanoparticles as anode of lithium ion batteries with enhanced reversible capacity and cyclic performance10.1021/nn100740x ↗
23. Nanographene-constructed carbon nanofibers grown on graphene sheets by chemical vapor deposition: high-performance anode materials for lithium ion batteries10.1021/nn200195k ↗
24. Graphene supported ZnO/CuO flowers composites as anode materials for lithium ion batteries10.1016/j.matlet.2015.03.136 ↗
25. Flexible and planar graphene conductive additives for lithium-ion batteries10.1039/c0jm01633k ↗
26. Graphene nanosheets based on controlled exfoliation process for enhanced lithium storage in lithium-ion battery10.1016/j.diamond.2011.03.027 ↗
27. Graphene-wrapped Fe3O4 anode material with improved reversible capacity and cyclic stability for lithium ion batteries10.1021/cm101532x ↗
28. Preparation of porous micro–nano-structure NiO/ZnO heterojunction and its photocatalytic property10.1039/C3RA44670K ↗
29. Flower-like ZnO–NiO–C films with high reversible capacity and rate capability for lithium-ion batteries10.1016/j.electacta.2010.05.017 ↗
30. Raman scattering studies on ZnO doped with Ga and N (codoping), and magnetic impurities10.1088/0953-8984/16/48/053 ↗
31. Polar optical phonons in wurtzite spheroidal quantum dots: theory and application to ZnO and ZnO/MgZnO nanostructures10.1088/0953-8984/17/7/003 ↗
32. Synthesis of flower-like NiO and effects of morphology on its catalytic properties10.1021/jp904186k ↗
33. ZnO@graphene composite with enhanced performance for the removal of dye from water10.1039/C0JM03253K ↗
34. Facile synthesis of three-dimensional graphene/nickel oxide nanoparticles composites for high performance supercapacitor electrodes10.1016/j.cej.2014.11.140 ↗
35. Fabrication and lithium storage performance of three-dimensional porous NiO as anode for lithium-ion battery10.1016/j.jpowsour.2010.04.090 ↗
36. Multi-electron reaction materials for high energy density batteries10.1039/B916098A ↗
37. Single electrospun porous NiO–ZnO hybrid nanofibers as anode materials for advanced lithium-ion batteries10.1039/c3nr34103h ↗
38. The morphology evolution of nickel phosphite hexagonal polyhedrons and their primary electrochemical capacitor applications10.1002/ppsc.201200147 ↗
39. Mesoporous nickel oxide nanowires: hydrothermal synthesis, characterisation and applications for lithium-ion batteries and supercapacitors with superior performance10.1002/chem.201200086 ↗
40. Hydrothermal derived Li2SnO3/C composite as negative electrode materials for lithium-ion batteries10.1016/j.apsusc.2012.03.136 ↗
41. Synthesis and electrochemical characterizations of Ce doped SnS2 anode materials for rechargeable lithium ion batteries10.1016/j.electacta.2013.01.072 ↗