Pure Al2O3·2SiO2 synthesized via a sol-gel technique as a raw material to replace metakaolin: Chemical and structural characterization and thermal behavior
Source abstract
Abstract
Abstract The performance of alkali activated cements is strongly influenced by mineralogical composition and the impurity content of metakaolin, their aluminosilicate precursor. In this study, pure aluminosilicates were synthesized via the sol-gel technique and the possibility of using them to replace metakaolin was explored. The study of their thermal behavior by simultaneous Thermogravimetry/Differential Thermal Analysis allowed the best temperature for inducing their complete dehydroxylation to be determined. X-ray diffraction, Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy showed that, after calcination, the materials were amorphous, homogeneous, and had a higher content of reactive Al(V) than metakaolin. The reactivity of the materials was ascertained by a leaching test carried out in strong alkaline solution. The quantification of the released aluminate and silicate species, carried out by inductively coupled plasma atomic emission spectroscopy, provided results which encouraged the use of the synthesized materials in the preparation of alkali activated cements and geopolymers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Glass properties and applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Siddique · 2011 · 175
2. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
3. Defining existence domains in geopolymers through their physicochemical properties10.1016/j.clay.2012.10.013 ↗
4. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
5. Use of geopolymers for composite external reinforcement of RC members10.1016/j.compositesb.2012.09.019 ↗
6. Use of reservoir clay sediments as raw materials for geopolymer binders10.1179/1743676112Y.0000000064 ↗
7. An environmental evaluation of geopolymer based concrete production: reviewing current research trends10.1016/j.jclepro.2011.03.012 ↗
8. Thermal treatment of kaolin clay to obtain metakaolin10.2298/HEMIND100322014I ↗
9. Use of the second-derivative differential thermal curve in the evaluation of cement-quartz pastes with metakaolin addition autoclaved at 180°C10.1016/S0040-6031(97)00409-7 ↗
10. Modifications induced by the thermal treatment of kaolin and determination of reactivity of metakaolin10.1016/j.clay.2012.09.019 ↗
11. Influence of metakaolin purities on potassium geopolymer formulation: the existence of several networks10.1016/j.jcis.2013.07.024 ↗
12. Brinker · 1989
13. Comparison of naturally and synthetically-derived, potassium-based geopolymers10.1002/9781118408353.ch9 ↗
14. Low-temperature sintered pollucite ceramic from geopolymer precursor using synthetic metakaolin10.1007/s10853-012-6944-7 ↗
15. Dissolution behavior of Jordanian clay-rich materials in alkaline solutions for alkali activation purpose. Part I10.1016/j.clay.2015.08.004 ↗
16. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
17. Selected Values of the Thermodynamic Properties of the Elements
18. Investigation on bioactivity, biocompatibility, thermal behavior and antibacterial properties of calcium silicate glass coatings containing Ag10.1016/j.jnoncrysol.2015.04.037 ↗
19. Synthesis, structural, spectroscopic and thermoanalytical study of sol–gel derived SiO2–CaO–P2O5 gel and ceramic materials10.1016/j.tca.2015.12.004 ↗
20. Sol–gel synthesis of SiO2–CaO–P2O5 glasses: influence of the heat treatment on their bioactivity and biocompatibility10.1016/j.ceramint.2015.06.075 ↗
21. Silica/quercetin sol-gel hybrids as antioxidant dental implant materials10.1088/1468-6996/16/3/035001 ↗
22. Sol-gel hybrid materials for aerospace applications: chemical characterization and comparative investigation of the magnetic properties10.1016/j.actaastro.2015.08.003 ↗
23. Geopolymer/PEG hybrid materials synthesis and investigation of the polymer influence on microstructure and mechanical behavior10.1590/1516-1439.342814 ↗
24. Solid-state NMR study of geopolymer prepared by sol-gel chemistry10.1016/j.jssc.2010.10.008 ↗
25. Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers10.1016/S1466-6049(00)00041-6 ↗
26. Raman microscopy of some kaolinite clay minerals
27. Impulsive wendroff’s type inequalities and their applications
28. Towards the synthesis of an Mg-containing silicate glass–ceramic to be used as a scaffold for cementum/alveolar bone regeneration10.1016/j.ceramint.2014.07.066 ↗
29. Synthesis and characterization of novel epoxy geopolymer hybrid composites10.3390/ma6093943 ↗
30. Al and Si coordination in SiO2 1bAl2O3 glasses and liquids: a study by NMR and IR spectroscopy and MD simulations10.1016/0009-2541(92)90063-B ↗
31. Effect of the rate of calcination of kaolin on the properties of metakaolin-based geopolymers10.1016/j.jascer.2014.12.003 ↗
32. Preparation of geopolymer precursors by sol–gel method and their characterization10.1007/s10853-009-3549-x ↗
33. Geopolymer formation processes at room temperature studied by 29Si and 27Al MAS-NMR10.1016/j.msea.2005.02.002 ↗
34. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
35. Physical properties and reactivity of pozzolans, and their influence on the properties of lime–pozzolan pastes10.1617/s11527-010-9689-2 ↗