journal article·2017-05

Electrospinning, optical properties and white LED applications of one-dimensional CaAl 12 O 19 :Mn 4+ nanofiber phosphors

Ze Liu, Minghua Yuwen, Jiaqing Liu, Caiyan Yu, Tongtong Xuan, Huili Li

Ceramics International· Volume 43· Issue 7
Publisher page

Abstract

Abstract Non-rare-earth, red-emitting CaAl 12 O 19 :Mn 4+ nanofiber phosphors have been successfully prepared by an electrospinning technique followed by an annealing process. The as-prepared precursor fibers have smooth surfaces with an average diameter of 5 µm. After annealing at high temperature, the diameter of the fibers gradually reduces due to the decomposition of the organic polymers. The photoluminescence and crystalline properties of the fibers were investigated as a function of Mn 4+ concentration and the annealing temperature. Under ultraviolet and blue light excitation, CaAl 12 O 19 :Mn 4+ exhibits a characteristic red emission at 655 nm with three satellite peaks due to the 2 E→ 4 A 2 transition of Mn 4+ . The highest PL intensity is achieved at a 0.5% Mn 4+ concentration and a firing temperature of 1400 °C. In comparison to CaAl 12 O 19 :Mn 4+ prepared by a usual solid-state reaction, the luminescence of the as-prepared nanofiber phosphors in the present work has been strongly enhanced by optimizing the morphology and improving the crystallinity and phase purity. The absorption band in the blue region and a bright emission in the red region make the CaAl 12 O 19 :Mn 4+ nanofiber phosphor a candidate for achieving high color rendering in YAG:Ce-based WLEDs. A warm WLED with a high CRI of 88.5 at a CCT of 4553 K has been successfully achieved by coating YAG:Ce with CaAl 12 O 19 :Mn 4+ nanofiber phosphors on blue InGaN chips.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Luminescence and Fluorescent Materials · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Highly efficient non-rare-earth red emitting phosphor for warm white light-emitting diodes10.1038/ncomms5312 ↗
2. Single-composition trichromatic white-emitting Ca4Y6(SiO4)6O: Ce3+/Mn2+/Tb3+ phosphor: luminescence and energy transfer10.1021/am201335d ↗
3. Lu3(Al,Si)5(O,N)12:Ce3+ phosphors with broad emission band and high thermal stability for white LEDs10.1016/j.jlumin.2014.10.032 ↗
4. Luminescent properties of yellowish orange Y3Al5−xSixO12−xNx:Ce phosphors and their applications in warm white light-emitting diodes10.1016/j.jallcom.2011.12.158 ↗
5. Microwave-assisted synthesis of CdS/ZnS:Cu quantum dots for white light-emitting diodes with high color rendition10.1021/cm503770w ↗
6. Progress in discovery and structural design of color conversion phosphors for LEDs10.1016/j.pmatsci.2016.09.007 ↗
7. Photoluminescent and crystalline properties of Y3−xAl5O12:Cex3+ phosphor nanofibers prepared by electrospinning10.1063/1.3095483 ↗
8. Red-emitting phosphor Ba9Lu2Si6O24:Ce3+,Mn2+ with enhanced energy transfer via self-charge compensation10.1021/acs.jpcc.5b07566 ↗
9. A red phosphor BaTiF6:Mn4+: reaction mechanism, microstructures, optical properties, and applications for white LEDs10.1039/C4DT00781F ↗
10. A study on the luminescence properties of CaAlBO4:RE3+ (RE=Ce, Tb, and Eu) phosphors10.1149/1.2953499 ↗
11. Recent developments in the new inorganic solid-state LED phosphors10.1039/C6DT01230B ↗
12. Garnet-based Li6CaLa2Sb2O12:Eu3+ red phosphors: a potential color-converting material for warm white light-emitting diodes10.1039/C5TC00708A ↗
13. Monodispersed Ce(iv)–Gd(iii)–Eu(iii) oxide phosphors for enhanced red emission under visible excitation10.1039/C3TC31952K ↗
14. Synthesis and characterization of nano-sized YAG:Ce, Sm spherical phosphors10.1016/S1002-0721(12)60263-4 ↗
15. Electrospinning preparation and luminescence properties of one-dimensional SrWO4: Sm3+ nanofibers10.1007/s10854-014-2021-0 ↗
16. Chemical trends of Mn4+ emission in solids10.1039/C4TC00031E ↗
17. A strategy for developing near infrared long-persistent phosphors: taking MAlO3:Mn4+,Ge4+(M = La, Gd) as an example10.1039/c3tc32075h ↗
18. The formation mechanism, improved photoluminescence and LED applications of red phosphor K2SiF6:Mn4+10.1039/C4TC00087K ↗
19. On the optical properties of the Mn4+ ion in solids10.1016/j.jlumin.2011.08.047 ↗
20. The red luminescence of Sr4Al14O25:Mn4+ enhanced by coupling with the SrAl2O4 phase in the 3SrO·5Al2O3 system10.1002/pssa.201329108 ↗
21. Synthesis and luminescence properties of CaAl2O4:Mn4+ phosphor10.1016/j.optmat.2014.10.002 ↗
22. Deep red phosphors SrAl12O19:Mn4+,M (M=Li+, Na+, K+, Mg2+) for high colour rendering white LEDs10.1002/pssa.201228815 ↗
23. Deep red phosphors SrMgAl10O17:Mn4+, M (M = Li+, Na+, K+, Cl−) for warm white light emitting diodes10.1007/s10854-014-1928-9 ↗
24. CaMg2Al16O27:Mn4+-based red phosphor: a potential color converter for high-powered warm W-LED10.1021/am507316b ↗
25. Luminescent properties of CaAl4O7 powders doped with Mn4+ ions10.1016/j.ceramint.2012.10.149 ↗
26. Preparation and luminescent properties of a new red phosphor (Sr4Al14O25:Mn4+) for white LEDs10.1016/j.jallcom.2012.09.139 ↗
27. Effects of crystal structures on luminescent properties of Eu doped Ca–Al–O systems10.1016/j.ceramint.2007.09.063 ↗
28. Luminescence properties of MAl12O19:Mn4+(M = Ca, Sr, Ba) for UV LEDs10.2109/jcersj2.117.647 ↗
29. Reduction of Mn4+ to Mn2+ in CaAl12O19 by co-doping charge compensators to obtain tunable photoluminescence10.1039/c3ra22938f ↗
30. Spectroscopic and crystal field analysis of absorption and photoluminescence properties of red phosphor CaAl12O19:Mn4+ modified by MgO10.1016/j.jallcom.2010.11.117 ↗
31. Fluorescence enhancement mechanism in phosphor CaAl12O19:Mn4+ modified with alkali-chloride10.1049/mnl.2012.0809 ↗
32. GeO2 dopant induced enhancement of red emission in CaAl12O19:Mn4+ phosphor10.1016/j.mseb.2011.12.016 ↗
33. Fluorescence properties of Mn4+ in CaAl12O19 compounds as red-emitting phosphor for white LED10.1016/j.jlumin.2005.01.003 ↗
34. Properties and synthesis of morphology-controllable CaAl12O19: Mn4+ by combustion synthesis10.1016/j.proeng.2011.12.508 ↗
35. Hydrothermal synthesis and photoluminescence properties of red phosphor BaSiF6:Mn4+ for LED applications10.1039/c3tc31878h ↗
36. One-dimensional luminescent materials derived from the electrospinning process: preparation, characteristics and application10.1039/c2jm15638e ↗
37. Comparative study of optical and structural properties of electrospun 1-dimensional CaYAl3O7:Eu3+ nanofibers and bulk phosphor10.1016/j.matchar.2014.06.002 ↗
38. Electrospun polymer/quantum dot composite fibers as down conversion phosphor layers for white light-emitting diodes10.1039/c3ra46809g ↗
39. Preparation and luminescent properties of europium-doped yttria fibers by electrospinning10.1016/j.jlumin.2006.01.360 ↗
40. Dy3+ and Eu3+ complexes co-doped flexible composite nanofibers to achieve tunable fluorescent color10.1007/s10854-015-2804-y ↗
41. Fabrication of transparent alumina (Al2O3) nanofibers by electrospinning10.1016/j.msea.2006.07.075 ↗
42. One-dimensional CaWO4 and CaWO4:Tb3+ nanowires and nanotubes: electrospinning preparation and luminescent properties10.1039/b818810f ↗
43. One-dimensional GdVO4:Ln3+ (Ln=Eu, Dy, Sm) nanofibers: electrospinning preparation and luminescence properties10.1016/j.jssc.2010.11.019 ↗
44. Synthesis and photoluminescence properties of GdBO3:Ln3+ (Ln=Eu, Tb) nanofibers by electrospinning10.1016/j.jallcom.2012.10.156 ↗
45. The fabrication of one-dimensional Ca4Y6(SiO4)6O: Ln3+ (Ln=Eu, Tb) phosphors by electrospinning method and their luminescence properties10.1016/j.jcis.2010.11.082 ↗
46. Preparation and luminescence properties of Lu2O3:Eu3+ nanofibers by sol-gel/electrospinning process10.1016/j.jcis.2010.05.053 ↗
47. CaSi2O2N2:Eu nanofiber mat based on electrospinning: facile synthesis, uniform arrangement, and application in white LEDs10.1039/c1jm13351a ↗
48. Electrospinning-derived Tb2(WO4)3:Eu3+ nanowires: energy transfer and tunable luminescence properties10.1039/c0nr00774a ↗
49. Fabrication and optical properties of Y2O3: Eu3+ nanofibers prepared by electrospinning10.1364/OE.17.022514 ↗
50. Preparation of SrAl2O4:Eu2+, Dy3+ fibers by electrospinning combined with sol-gel process10.1016/j.jcis.2009.12.044 ↗
51. Electrospinning preparation and properties of NaGdF4:Eu3+ nanowires10.1016/j.solidstatesciences.2010.08.011 ↗
52. Preparation and luminescence properties of Mn2+-doped ZnGa2O4 nanofibers via electrospinning process10.1016/j.materresbull.2009.06.008 ↗