Preparation and formation mechanism of Al-Si/Al2O3 core-shell structured particles fabricated via steam corrosion
Source abstract
Abstract
Abstract In this study, Al-Si/Al2O3 core-shell structured particles were fabricated via pressurized steam corrosion for 1 h followed by heating for 3 h at 1100 °C. After steam corrosion, a layer composed of disordered crystals covered the surfaces of the Al-Si alloy particles. After heating, Al-Si/Al2O3 core-shell structured particles with complete shells were prepared. The thickness of the shell was approximately 2 μm, and it enclosed the Al-Si alloy core. The shell exhibited excellent thermal stability because, even at 1100 °C, the mass gain ratio of the encapsulated particle was less than 0.5%. Scalloped patterns of alumina were formed by the oxidation of Al, which was inlaid through and upon the alumina shell. The shell formation mechanism suggested that the α-Al2O3 shell resulted from the combination of the decomposition of surface Al(OH)3 crystals and the oxidation of Al from the core.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Aging effect on the tribological behavior of a novel 3Y-TZP/Nb biocomposite against ultra high molecular weight polyethylene (UHMWPE)10.1111/j.1551-2916.2011.05036.x ↗
2. Zirconia/stainless-steel continuous functionally graded material10.1016/S0955-2219(02)00046-8 ↗
3. Mullite-refractory metal (Mo, Nb) composites10.1016/j.jeurceramsoc.2007.03.020 ↗
4. Microstructure and mechanical properties of ZrO2 ceramics toughened by 5-20 vol% Ta metallic particles fabricated by pressureless sintering10.1016/j.ceramint.2013.07.084 ↗
5. Coarse-grained refractory composites based on Nb-Al2O3, and Ta-Al2O3, castables10.1016/j.ceramint.2018.06.116 ↗
6. Thermal conductivity of ceramic/metal composites from preforms produced by freeze casting10.1016/j.ceramint.2016.06.016 ↗
7. Effects of oxide addition on the microstructure and mechanical properties of lamellar SiC scaffolds and Al–Si–Mg/SiC composites prepared by freeze casting and pressureless infiltration10.1016/j.ceramint.2016.03.052 ↗
8. Strong and tough metal/ceramic micro-laminates10.1016/j.actamat.2017.10.059 ↗
9. Phase and microstructural evolution based on Al, Si and TiO2 reactions with a MgO-C resin-bonded refractory10.1016/j.ceramint.2016.06.180 ↗
10. Phase formation in Al2O3-C refractories with Al addition10.1016/j.jeurceramsoc.2016.11.027 ↗
11. Improving mullite-silicon carbide refractory in coke dry quenching using aluminum nitride whiskers formed in situ10.1016/j.ceramint.2017.09.107 ↗
12. In situ synthesis of AlN whiskers in mullite-silicon carbide refractory under simulated coke dry quenching conditions10.1016/j.ceramint.2017.12.162 ↗
13. Improvement of deformation capacity of gas-atomized hypereutectic Al−Si alloy powder by annealing treatment10.1016/S1003-6326(18)64795-8 ↗
14. Preparation of Al–Si alloys by a rapid solidification and powder metallurgy route10.1016/j.matdes.2015.08.106 ↗
15. Microscopic strength of silicon particles in an aluminium–silicon alloy10.1016/j.actamat.2015.12.006 ↗
16. CuO@ZnO core-shell nanocomposites: novel hydrothermal synthesis and enhancement in photocatalytic property10.1016/j.jallcom.2016.08.267 ↗
17. Hydrothermal synthesis and characterization of core/shell AlOOH microspheres10.1016/j.micromeso.2008.10.017 ↗
18. Hydrothermal synthesis of core-shell TiO2 to enhance the photocatalytic hydrogen evolution10.1016/j.apsusc.2016.01.247 ↗
19. Structural and magnetic properties of CoFe2O4/NiFe2O4, core/shell nanocomposite prepared by the hydrothermal method10.1016/j.jmmm.2015.07.039 ↗
20. Sol–gel synthesis, structural and luminescence properties of MT-doped SiO2/Zn2SiO4, nanocomposites10.1016/j.optmat.2014.01.019 ↗
21. J Jayabharathi, Electrical, optical and photocatalytic properties of polyethylene glycol-assisted sol–gel synthesized Mn-doped TiO2/ZnO core–shell nanoparticles10.1016/j.spmi.2013.10.021 ↗
22. Design of SiO/ZrO core–shell particles using the sol–gel process10.1016/j.ceramint.2008.06.003 ↗
23. Protecting the MoSi2, healing particles for thermal barrier coatings using a sol-gel produced Al2O3, coating10.1016/j.jeurceramsoc.2018.02.002 ↗
24. Polymer-assisted sole-gel process for the preparation of photostimulable core/shell structured SiO2/Zn2SiO4:Mn2+ particles10.1016/j.matchemphys.2014.09.017 ↗
25. High coercivity sized controlled cobalt–gold core–shell nano-crystals prepared by reverse microemulsion10.1016/j.materresbull.2013.06.021 ↗
26. Microemulsion synthesized silica/ZnO stable core/shell sensors highly selective to ethanol with minimum sensitivity to humidity10.1016/j.snb.2016.07.127 ↗
27. Advanced microemulsion synthesis and characterization of wollastonite (CaSiO3)/polystyrene one-dimensional nanorods with core–shell structures10.1016/j.partic.2016.04.002 ↗
28. Preparation of core–shell porous magnetite@carbon nanospheres through chemical vapor deposition as anode materials for lithium-ion batteries10.1016/j.electacta.2014.12.038 ↗
29. Growth and structural property studies on NiSi/SiC core-shell nanowires by hot-wire chemical vapor deposition10.1016/j.tsf.2014.03.030 ↗
30. In situ preparation of nickel/carbon core–shell structure by chemical vapor deposition10.1016/j.apsusc.2013.07.052 ↗
31. Atomic level tailoring of the electrocatalytic activity of Au-Pt core-shell nanoparticles with controllable Pt layers toward hydrogen evolution reaction10.1016/j.jelechem.2017.12.006 ↗
32. Effects of Pt shell thickness on self-assembly monolayer Pd@Pt core-shell nanocrystals based hydrogen sensing10.1016/j.ijhydene.2016.06.138 ↗
33. Antimicrobial activity of the biogenically synthesized core-shell Cu@Pt nanoparticles10.1016/j.jsps.2018.02.028 ↗
34. A green approach of synthesizing of Cu-Ag core-shell nanoparticles and their sintering behavior for printed electronics10.1016/j.jallcom.2017.07.045 ↗
35. Core/shell Cu@Ag nanoparticle: a versatile platform for colorimetric visualization of inorganic anions10.1021/am200972g ↗
36. An interconnection method based on Sn-coated Ni core-shell powder preforms for high-temperature applications10.1016/j.jallcom.2018.10.267 ↗
37. Deformation mechanisms and ductility enhancement in core-shell Cu@Ni nanoporous metals10.1016/j.commatsci.2018.04.035 ↗
38. Structural and phase change characteristics of inorganic microencapsulated core/shell Al–Si/Al2O3, micro-particles during thermal cycling10.1016/j.ceramint.2015.05.001 ↗
39. Comparison of structure and phase change characteristic of microencapsulated core/shell Al–Si alloy microparticles synthesized by two methods10.1007/s10971-015-3743-z ↗
40. Microencapsulation of metal-based phase change material for high-temperature thermal energy storage10.1038/srep09117 ↗
41. Microencapsulated phase change materials with high heat capacity and high cyclic durability for high-temperature thermal energy storage and transportation10.1016/j.apenergy.2016.11.025 ↗
42. A core–shell structured Si–Al@Al2O3 as novel support of Pd catalyst10.1016/j.catcom.2015.04.027 ↗
43. Preparation and catalytic application Al–Si@Al2O3 core-shell structured carrier
44. Al/Al2O3 core˗shell particles synthesized by wet˗chemical based route10.4028/www.scientific.net/KEM.313.63 ↗
45. Morphology and size distribution of high silicon aluminum alloy powder produced using gas atomization
46. Oxodation and adsorption characteristics of powder surface of Al-Si alloy prepared by ultrasonic gas atomization process
47. Yaws · 1999
48. Li · 2010
49. Preparation of aluminum hydroxide and oxide nanostructures with controllable morphology by wet oxidation of AlN/Al nanoparticles10.1016/j.materresbull.2018.04.011 ↗
50. Discussion of relation between aluminium hydroxide crystal shape and application performance
51. Mondolfo · 1988
52. The microstructure, coefficient of thermal expansion and flexural strength of cordierite ceramics prepared from alumina with different particle sizes10.1016/j.jeurceramsoc.2016.08.032 ↗
53. Investigation on three line expansion coefficients of α-Al2O3
54. Oxidation behavior of a high Si content Al–Si composite coating fabricated on Ti–6Al–4V substrate by mechanical alloying method10.1016/j.jallcom.2017.01.078 ↗
55. Microstructure and oxidation behavior of Mo-Si-Al coating on Nb-based alloy10.1016/j.jallcom.2017.11.339 ↗
56. Study on high temperature oxidation of Al-Si coating on superalloy
57. Effect of process parameters on viscosity of Al–Si alloy melts
58. Oxygen and aluminum diffusion in α-Al2O3: how much do we really understand?10.1016/j.jeurceramsoc.2007.12.020 ↗
59. High-temperature oxidation of pure Al: kinetic modeling supported by experimental characterization10.1016/j.corsci.2018.05.013 ↗