Superior sensitive NiFe2O4 electrode for mixed-potential NO2 sensor
Source abstract
Abstract
Abstract A spinel-type metal oxide NiFe2O4 prepared by solid state synthesis was utilized as sensing electrode on a YSZ (yttria stabilization zirconia) based mixed potential NO2 sensor. NO2 sensing performances were evaluated at an operating temperature range of 350–500 °C. The sensor exhibited maximum response (81.3 mV to 100 ppm NO2) at 400 °C and optimal sensitivity of 82.8 mV/decade at 450 °C. Both cycling response and cross-sensitivity were evaluated, indicating good stability and selectivity. Furthermore, the EIS (electrochemical impedance spectrum) was also investigated to claim its sensing mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Ultrasensitive NO2 gas sensing based on rGO/MoS2 nanocomposite film at low temperature10.1016/j.snb.2017.05.060 ↗
2. UV assisted ultrasensitive trace NO2 gas sensing based on few-layer MoS2 nanosheet–ZnO nanowire heterojunctions at room temperature10.1039/C8TA02679C ↗
3. UV light activated NO2 gas sensing based on Au nanoparticles decorated few-layer MoS2 thin film at room temperature10.1063/1.5042061 ↗
4. Enhancing the NO2 gas sensing properties of rGO/SnO2 nanocomposite films by using microporous substrates10.1016/j.snb.2017.04.030 ↗
5. Metal oxides for solid-state gas sensors: what determines our choice?10.1016/j.mseb.2007.01.044 ↗
6. Materials for high temperature electrochemical NOx gas sensors10.1016/j.snb.2006.04.077 ↗
7. Impedancemetric NO2 sensor based on Pd doped perovskite oxide sensing electrode conjunction with phase angle response10.1016/j.electacta.2018.01.205 ↗
8. Effects of sintering temperature on the NH3 sensing properties of Mg2Cu0.25Fe1O3.75 electrode for YSZ-based potentiometric NH3 sensor10.1016/j.ceramint.2015.10.013 ↗
9. Effects of sintering temperature on sensing properties of V2O5-WO3-TiO2 electrode for potentiometric ammonia sensor10.1016/j.snb.2016.09.117 ↗
10. Investigation of WO3-based potentiometric sensor performance (M/YSZ/WO3, M = Au, Pd, and TiO2) with varying counter electrode10.1016/j.ssi.2008.07.020 ↗
11. Development of zirconia-based potentiometric NOx sensors for automotive and energy industries in the early 21st century: what are the prospects for sensors?10.1016/j.snb.2006.03.044 ↗
12. Mixed-potential-type zirconia-based NO2 sensor with high-performance three-phase boundary10.1016/j.snb.2011.02.051 ↗
13. Planar electrochemical sensors based on tape-cast YSZ layers and oxide electrodes10.1016/j.ssi.2004.05.003 ↗
14. Dynamical and geometrical aspects of NO chemisorption on transition metals: rh, Pd, and Pt10.1103/PhysRevB.55.13298 ↗
15. Application of advanced morphology Au–X (X=YSZ, ZrO2) composites as sensing electrode for solid state mixed-potential exhaust NOx sensor10.1016/j.snb.2014.10.017 ↗
16. Performances of planar NO2 sensor using stabilized zirconia and NiO sensing electrode at high temperature10.1016/j.ssi.2005.02.031 ↗
17. Sensing properties and selectivities of a WO3/YSZ/Pt potentiometric NOx sensor10.1016/j.snb.2006.07.024 ↗
18. Effect of the morphology of solution-grown ZnO nanostructures on gas-sensing properties10.1111/jace.15096 ↗
19. The NO2 response of solid electrolyte sensors made using nano-sized LaFeO3 electrodes10.1016/S0925-4005(01)00594-9 ↗
20. High sensitivity and selectivity of mixed potential sensor based on Pt/YSZ/SmFeO3 to NO2 gas10.1016/j.snb.2013.04.035 ↗
21. Effect of La2CuO4 electrode area on potentiometric NOx sensor response and its implications on sensing mechanism10.1016/j.snb.2011.06.025 ↗
22. Optimization of La2CuO4 sensing electrodes for a NOx potentiometric sensor10.1149/1.2215548 ↗
23. Effects of YSZ addition on the response of La2CuO4 sensing electrode for a potentiometric NOx sensor10.1016/j.snb.2013.10.118 ↗
24. Electrochemical reduction of NO on La2-xSrxNiO4 based electrodes10.1007/s10008-008-0711-3 ↗
25. NOx sensing performances of mixed-potential-type gas sensor based on stabilized-zirconia and La5/3Sr1/3NiO4 sensing electrode10.4028/www.scientific.net/KEM.602-603.841 ↗
26. Spinels as cathodes for the electrochemical reduction of O2 and NO10.1007/s11244-007-0255-2 ↗
27. Stabilized zirconia-based sensor using oxide electrode for detection of NOx in high-temperature combustion-exhausts10.1016/0167-2738(96)00252-4 ↗
28. The effects of sintering temperature of MnCr2O4 nanocomposite on the NO2 sensing property for YSZ-based potentiometric sensor10.1016/j.snb.2012.11.040 ↗
29. Stabilized zirconia-based NOx sensor using ZnFe2O4 sensing electrode10.1149/1.1388997 ↗
30. Nanosized spinel NiFe2O4: a novel material for the detection of liquefied petroleum gas in air10.1016/S0254-0584(03)00170-6 ↗
31. Hydrogen sulfide sensing properties of NiFe2O4 nanopowder doped with noble metals10.1016/j.snb.2004.04.014 ↗
32. Preparation and gas-sensing properties of NiFe2O4 semiconductor materials10.1016/j.sse.2005.03.022 ↗
33. The NiFe2O4 -MgFe2O4 series as electrode materials for electrochemical reduction of NOx10.1007/s10008-008-0653-9 ↗
34. Effect of electrode microstructure on the sensitivity and response time of potentiometric NOx sensors based on stabilized-zirconia and La5/3Sr1/3NiO4 YSZ sensing electrode10.1016/j.sse.2014.03.001 ↗
35. Sensitive and selective zirconia-based NO2 sensor using gold nanoparticle coatings as sensing electrodes
36. Mixed-potential-type zirconia-based NOx sensor using Rh-loaded NiO sensing electrode operating at high temperatures10.1016/j.ssi.2005.12.023 ↗
37. Electrochemical NOx sensors based on interfacing nanosized LaFeO3 perovskite-type oxide and ionic conductors
38. NO2 sensing properties of La0.65Sr0.35MnO3 synthesized by self-propagating combustion10.1007/s11581-015-1605-x ↗
39. Sensing properties of YSZ-based NOx sensors with double-perovskite (La0.8Sr0.2)2FeNiO6−δ sensing electrodes10.1016/j.ceramint.2014.01.147 ↗
40. Impedancemetric gas sensor based on zirconia solid electrolyte and oxide sensing electrode for detecting total NOx at high temperature10.1016/S0925-4005(03)00196-5 ↗
41. Mixed-potential NH3 sensor based on Ce0.8Gd0.2O1.9 solid electrolyte10.1016/j.snb.2017.04.035 ↗
42. Investigation of La2CuO4/YSZ/Pt potentiometric NOx sensors with electrochemical impedance spectroscopy
43. Electrochemical NOx sensors based on stabilized zirconia: comparison of sensing performances of mixed-potential-type and impedancemetric NOx sensors10.1007/s10832-006-7671-8 ↗