journal article·2019-09

Monolithic silicon nitride-based aerogels with large specific surface area and low thermal conductivity

Yong Kong, Jiayue Zhang, Zhiyang Zhao, Xing Jiang, Xiaodong Shen

Ceramics International· Volume 45· Issue 13
Publisher page

Abstract

Abstract C/silica (RF/SiO2) aerogel (RFSA) was synthesized via a one-step sol-gel process and supercritical fluid drying. Then, monolithic silicon nitride (Si3N4) aerogel (SNA) was prepared via carbothermal nitridation of the RFSA in flowing N2. The effects of the RFSA density and carbothermal temperature on the formation of the SNA were investigated. The evolution of the physical properties, chemical structure, morphology, pore structure, and thermal performance of the SNA was examined. Si3N4 nanocrystals were formed from the RFSA at a carbothermal temperature of 1500 °C. The as-prepared SNA had a low density (0.127 g/cm3), large specific surface area (445 m2/g) and low thermal conductivity (0.04909 W/(m·K)), which were far better than those of its state-of-art counterparts. Because of its good thermal stability, the SNA can be used as a thermal insulator and support at high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Advanced ceramic materials synthesis · Mesoporous Materials and Catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Facile synthesis of hydrophobic, thermally stable, and insulative organically modified silica aerogels using co-precursor method10.1016/j.ceramint.2017.11.189 ↗
2. A new aerogel based CO2 adsorbent developed using a simple sol-gel method along with supercritical drying10.1039/C4CC06424K ↗
3. Facile synthesis of an amine hybrid aerogel with high adsorption efficiency and regenerability for air capture via a solvothermal-assisted sol-gel process and supercritical drying10.1039/C5GC00354G ↗
4. Double-negative-index ceramic aerogels for thermal superinsulation10.1126/science.aav7304 ↗
5. A facile chemical route for synthesis of nitrogen-doped graphene aerogel decorated by Co3O4 nanoparticles10.1016/j.ceramint.2018.09.126 ↗
6. Porous carbon-bonded carbon fiber composites impregnated with SiO2-Al2O3 aerogel with enhanced thermal insulation and mechanical properties10.1016/j.ceramint.2017.11.064 ↗
7. Novel self-reinforcing ZrO2-SiO2 aerogels with high mechanical strength and ultralow thermal conductivity10.1016/j.ceramint.2018.05.199 ↗
8. Novel whisker-reinforced Al2O3-SiO2 aerogel composites with ultra-low thermal conductivity10.1016/j.ceramint.2017.04.043 ↗
9. Dynamic capture of low-concentration CO2 on amine hybrid silsesquioxane aerogel10.1016/j.cej.2015.08.034 ↗
10. Experimental and modeling investigation on CO2 sorption kinetics over K2CO3-modified silica aerogels10.1016/j.cej.2016.11.121 ↗
11. Aercogel-based materials for building applications: influence of granule size on thermal and acoustic performance10.1016/j.enbuild.2017.07.071 ↗
12. Grinding characteristics and removal mechanisms of unidirectional carbon fibre reinforced silicon carbide ceramic matrix composites10.1016/j.ceramint.2018.10.178 ↗
13. The fabrication of tungsten reinforced silicon nitride ceramics by altering nitrogen pressure10.1016/j.ceramint.2018.12.061 ↗
14. The effect of compactness on the carbothermal conversion of interpenetrating metal oxide/resorcinol-formaldehyde nanoparticle networks to porous metals and carbides10.1039/c0jm00856g ↗
15. A novel SiCN@TiO2 core-shell ceramic microspheres derived from a polymeric precursor10.1016/j.ceramint.2016.01.102 ↗
16. SiBCN-ZrO2 hybrid ceramic aerogels through the polymer-derived ceramics (PDCs) route10.1016/j.ceramint.2018.09.098 ↗
17. Click synthesis of monolithic silicon carbide aerogels from polyacrylonitrile-coated 3D silica networks10.1021/cm903662a ↗
18. Synthesis of resorcinol–formaldehyde/silica composite aerogels and their low-temperature conversion to mesoporous silicon carbide10.1016/j.micromeso.2011.09.008 ↗
19. Preparation of monolith SiC aerogel with high surface area and large pore volume and the structural evolution during the preparation10.1016/j.ceramint.2014.01.025 ↗
20. Use of monolithic silicon carbide aerogel as a reusable support for development of regenerable CO2 adsorbent10.1039/C4RA11261J ↗
21. Synthesis of monolithic mesoporous silicon carbide from resorcinol–formaldehyde/silica composites10.1016/j.matlet.2013.02.047 ↗
22. Synthesis and characterization of monolithic carbon/silicon carbide composite aerogels10.1007/s10934-012-9660-4 ↗
23. Facile synthesis of resorcinol-formaldehyde/silica composite aerogels and their transformation to monolithic carbon/silica and carbon/silicon carbide composite aerogels10.1016/j.jnoncrysol.2012.08.029 ↗
24. Effect of carbothermal reduction temperature on microstructure of fiber reinforced silicon carbide porous monoliths with high thermal resistance
25. Preparation of fiber reinforced porous silicon carbide monoliths10.1016/j.matlet.2013.07.119 ↗
26. Synthesis, structure, and properties of silicon oxycarbide aerogels derived from tetraethylortosilicate/polydimethylsiloxane10.1016/j.ceramint.2014.11.111 ↗
27. Preparation and structural evolution of SiOC preceramic aerogel during high-temperature treatment10.1016/j.ceramint.2017.09.212 ↗
28. Large size and low density SiOC aerogel monolith prepared from triethoxyvinylsilane/tetraethoxysilane10.1016/j.ceramint.2017.01.124 ↗
29. Polymer-derived SiOC aerogel with hierarchical porosity through HF etching10.1016/j.ceramint.2016.04.101 ↗
30. Sol-gel synthesis of preceramic polyphenylsilsesquioxane aerogels and their application toward monolithic porous SiOC ceramics10.1016/j.ceramint.2018.05.115 ↗
31. Sturdy, monolithic SiC and Si3N4 aerogels from compressed polymer-cross-linked silica xerogel powders10.1021/acs.chemmater.7b04981 ↗
32. Development of monolithic adsorbent via polymeric sol-gel process for low-concentration CO2 capture10.1016/j.apenergy.2015.03.011 ↗
33. One-pot sol-gel synthesis of amine hybrid titania/silsesquioxane composite aerogel for CO2 capture10.1007/s10971-017-4516-7 ↗
34. The sol-gel preparation of silica gels10.1021/ed071p599 ↗
35. Sol-gel chemistry of transition metal oxides10.1016/0079-6786(88)90005-2 ↗
36. Ultralow density carbon aerogels with low thermal conductivity up to 2000 C10.1016/j.matlet.2011.07.114 ↗
37. Silica aerogels having high flexibility and hydrophobicity prepared by sol-gel method10.1016/j.ceramint.2018.08.173 ↗
38. Synthesis and physicochemical characterization of silica aerogels by rapid seed growth method10.1016/j.ceramint.2018.12.209 ↗
39. Synthesis and characterization by FTIR spectroscopy of silica aerogels prepared using several Si (OR)4 and R′′ Si (OR')3 precursors10.1016/j.molstruc.2008.08.025 ↗
40. Reaction of (3-aminopropyl)dimethylethoxysilane with amine catalysts on silica surfaces10.1006/jcis.2000.7224 ↗
41. Effects upon nitrogen sorption analysis in aerogels10.1006/jcis.2000.7419 ↗