journal article·2020-03

Direct coarse powder aqueous slip casting and pressureless sintering of highly transparent AlON ceramics

Xiannian Sun, Haokai Wu, Gongzhi Zhu, Yingchun Shan, Jiujun Xu, Jiangtao Li, Eugene A. Olevsky

Ceramics International· Volume 46· Issue 4
Publisher page

Abstract

Abstract Direct coarse powder aqueous slip casting was proposed to prepare AlON green body for pressureless sintering of highly transparent AlON ceramics. It was reported that anti-hydrolysis treatment to AlON powder before aqueous slip casting was essential due to hydrolysis reaction between AlON and water. However, both XRD of hydrolyzed powder and pH value of aqueous slurry indicate that the hydrolyzate amount is positively correlating with hydrolysis reaction area, i.e., surface area of powder. Therefore, replacing fine particle with coarse one to reduce surface area of powder is an efficient hydrolyzates reduction scheme by lessening hydrolysis reaction sites. As a result, the hydrolyzate in green body of direct slip casting coarse AlON powder (91 vol% of particles have a size of >1.0 μm) was successfully reduced to an insignificant amount so that the sintered ceramics had a high transmittance (84.1% at ~3750 nm), which also verified the effectiveness of the proposed hydrolyzate-reduction scheme.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Microwave-Assisted Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. AlON: a brief history of its emergence and evolution10.1016/j.jeurceramsoc.2008.03.046 ↗
2. Transparent ceramics at 50: progress made and further prospects10.1111/jace.14553 ↗
3. Hartnett · 1984 · 15
4. Electronic, elastic, thermodynamic properties and structure disorder of γ-AlON solid solution from ab initio calculations10.1016/j.jallcom.2012.09.002 ↗
5. Highly transparent AlON ceramics sintered from powder synthesized by carbothermal reduction nitridation10.1016/j.ceramint.2016.02.041 ↗
6. Fabrication of aluminum oxynitride (γ-AlON) transparent ceramics with modified gelcasting10.1111/jace.12853 ↗
7. A new and highly active sintering additive: SiO2 for highly-transparent AlON ceramic10.1016/j.jallcom.2019.02.106 ↗
8. Current understanding and future research directions at the onset of the next century of sintering science and technology10.1111/jace.14919 ↗
9. Highly transparent AlON sintered from powder synthesized by direct nitridation10.1016/j.jeurceramsoc.2014.10.036 ↗
10. Highly transparent AlON pressurelessly sintered from powder synthesized by a novel carbothermal nitridation method10.1111/j.1551-2916.2012.05253.x ↗
11. A contrast of carbothermal reduction synthesis of MgAlON and AlON powders for transparent ceramics10.1016/j.jallcom.2019.03.387 ↗
12. Fabrication of highly transparent AlON ceramics by hot isostatic pressing post-treatment10.1016/j.jeurceramsoc.2017.04.028 ↗
13. Fabrication of transparent yttria ceramics by alcoholic slip-casting10.1016/j.ceramint.2017.04.017 ↗
15. An aqueous gelcasting process for sintered silicon carbide ceramics10.1111/j.1551-2916.2006.01198.x ↗
16. Aqueous slip casting of transparent aluminum oxynitride10.1111/jace.14349 ↗
17. Transmittance enhancement of AlON transparent ceramic by aqueous gel-casting with phosphoric acid-treated powder10.1016/j.jeurceramsoc.2016.06.018 ↗
18. Water-based method for processing aluminum oxynitride (AlON)10.1111/j.1744-7402.2008.02245.x ↗
19. Processing of aluminum oxynitride through aqueous colloidal forming techniques10.1111/j.1551-2916.2009.03418.x ↗
20. A fast pressureless sintering method for transparent AlON ceramics by using a bimodal particle size distribution powder10.1016/j.ceramint.2014.11.084 ↗
21. Structure models for γ-aluminum oxynitride from Ab initio calculations10.1111/j.1151-2916.2001.tb01064.x ↗
22. Luo · 2012 · 89
23. Interactions in aqueous Al2O3-AlN suspensions during the HAS process10.1016/S0921-5093(98)00797-7 ↗
24. Optical properties of ALON (aluminum oxynitride)10.1016/S1350-4495(98)00007-3 ↗