Effects of Al particle size and nitrogen pressure on AlN combustion synthesis
Source abstract
Abstract
Abstract This study investigates the combustion synthesis of AlN fibers using an NH4Cl additive and reports the effects of Al particle size (3, 30, and 180 µm) and N2 pressure (0.10, 0.25, and 0.50 MPa) on the purity and morphology of AlN fibers. The combustion temperature was directly measured during the synthesis to elucidate the formation mechanism of the AlN fibers. The phase purity and morphology of the products were studied using X-ray diffraction and scanning electron microscopy, respectively. When the particle size of Al was reduced from 180 to 3 µm, the purity of the AlN product increased significantly owing to the large reaction area, which increased the combustion temperature. Furthermore, lower N2 pressures enhanced the formation of AlN nanofibers due to the accelerated gasification of Al. The optimum values of the particle size of Al and the N2 pressure for the formation of high-purity AlN nanofibers were found to be 3 µm and 0.10 MPa, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. III-V Nitrides for electronic and optoelectronic applications10.1109/5.90133 ↗
2. The intrinsic thermal conductivity of AlN10.1016/0022-3697(87)90153-3 ↗
3. Fabrication of aluminum nitride (AlN) hollow fibers by carbothermal reduction and nitridation of electrospun precursor fibers10.1016/j.jallcom.2008.03.099 ↗
4. Aluminum nitride-an alternative ceramic substrate for high power applications -in microcircuits10.1109/TCHMT.1984.1136380 ↗
5. Fabrication and characterization of aluminum nitride polymer matrix composites with high thermal conductivity and low dielectric constant for electronic packaging10.1016/j.mseb.2012.03.056 ↗
6. Enhanced thermal conductivity of polymer composites filled with three-dimensional brushlike AlN nanowhiskers10.1063/1.3271028 ↗
7. Optical properties of highly ordered AlN nanowire arrays grown on sapphire substrate10.1063/1.1922577 ↗
8. The sublimation growth of AlN fibers: transformations in morphology & fiber direction10.1007/s00339-008-4722-9 ↗
9. Synthesis of rhombic and triangular cross-sectional AlN nanorods on Si substrate via thermal CVD10.1016/j.matlet.2011.02.052 ↗
10. Catalytic growth of group III-nitride nanowires and nanostructures by metalorganic chemical vapor deposition10.1063/1.1843281 ↗
11. Catalyst-free synthesis, morphology evolution and optical property of one-dimensional aluminum nitride nanostructure arrays10.1016/j.jallcom.2010.05.021 ↗
12. History and recent developments in SHS10.1016/0272-8842(95)96211-7 ↗
13. Yamada · 1992 · 81
14. Aluminum nitride whisker formation during combustion synthesis10.1111/j.1151-2916.2000.tb01341.x ↗
15. Combustion synthesis of AlN whiskers10.1007/s10853-006-2939-6 ↗
16. Fabrication of AlN particles and whiskers via salt-assisted combustion synthesis10.1016/j.ceramint.2014.11.135 ↗
17. Factors which affect the morphology of AlN particles made by self-propagating high-temperature synthesis (SHS)10.1016/j.jcrysgro.2006.08.016 ↗
18. Combustion synthesis of high purity α-Si3N4 by premixing of raw materials10.4164/sptj.53.301 ↗
19. Fabrication of mixed α/β-SiAlON powders via salt-assisted combustion synthesis10.1016/j.jallcom.2014.03.145 ↗
20. Morphology control of β-SiAlON via salt-assisted combustion synthesis10.1016/j.ceramint.2013.07.082 ↗
21. Salt-assisted combustion synthesis of Ca-α-SiAlON:Eu2+ phosphors10.1016/j.jallcom.2016.04.211 ↗
22. Self-propagating high-temperature synthesis of aluminum nitride under lower nitrogen pressures10.1111/j.1151-2916.2000.tb01324.x ↗
23. Growth of AlN nanowires by metal organic chemical vapour deposition10.1002/pssb.200565205 ↗