journal article·2015-11

Effect of codeposition parameters on the hardness and adhesion of TiVN coatings

C. Montero-Ocampo, E.A. Ramírez-Ceja, J.A. Hidalgo-Badillo

Ceramics International· Volume 41· Issue 9
Publisher page

Abstract

Abstract A systematic study of the effect of PVD cathodic arc deposition parameters on TiVN coating performance was carried out to analyze the structure, surface morphology, chemical composition, hardness and adhesion of these coatings. The effects of four factors including operation pressure, substrate bias voltage, and the currents applied to the Ti target and to the V target were evaluated. The investigated coatings were analyzed by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, adhesion tests (i.e., scratch tests) and Vickers microhardness tests. The results of this study showed that the current applied to the V target was the factor having the greatest effect on TiVN coating hardness, while the bias voltage applied to the substrate had the greatest effect on adhesion strength. The obtained TiVN coatings were shown to have good hardness values near 15 GPa and high adhesion critical loads near 113 N.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Plasma Diagnostics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Microhardness and structural analysis of (Ti,Al)N, (Ti,Cr)N, (Ti,Zr)N and (Ti,V)N films10.1116/1.582296 ↗
2. High-temperature tribological properties of a cathodic arc ion-plated (V,Ti)N coating10.1016/j.wear.2006.12.031 ↗
3. Tensile and fracture process of the TiN/VN interface from first principles10.1016/j.ceramint.2014.07.016 ↗
4. The effect of (Ti+Al):V ratio on the structure and oxidation behavior of TiAlN/NV nano-scale multilayer coatings10.1016/j.surfcoat.2003.09.041 ↗
5. Arc-evaporated Ti–V–N thin films10.1016/S0257-8972(09)90058-5 ↗
6. Structure and properties of magnetron-sputtered Ti–V–N coatings10.1016/S0040-6090(05)80065-3 ↗
7. Properties and cutting performance of (Ti,V)N coatings prepared by cathodic arc ion plating10.1016/j.surfcoat.2005.08.026 ↗
8. The growth of epitaxial VN (111) nanolayer surfaces10.1016/j.susc.2007.07.032 ↗
9. Supertoughening in B1 transition metal nitride alloys by increased valence electron concentration10.1016/j.actamat.2010.12.013 ↗
10. Effects of vanadium content on structure and chemical state of TiVN films prepared by reactive dc magnetron co-sputtering
11. A nanoindentation study of magnetron co-sputtered nanocrystalline ternary nitride coatings10.2298/SOS0603211Y ↗
12. The friction and wear characteristics of cathodic arc ion-plated (V, Ti)N coatings in sliding against alumina ball10.1016/j.wear.2004.03.014 ↗
13. Taguchi · 1987 · vol. 1
14. On the hardness of coated systems10.1016/S0257-8972(97)00522-7 ↗
15. Determination of chemical composition and its relationship with optical properties of Ti–N and Ti–V–N sputtered thin films10.1016/0257-8972(94)90157-0 ↗
16. Efects of vanadium ion implantation on microestructure, mechanical and tribological properties of TiN coating10.1016/j.apsusc.2012.06.001 ↗
17. The N–Ti–V system (nitrogen–titanium–vanadium)10.1007/BF02648494 ↗
18. The influence of the addition of a third element on the structure and mechanical properties of transition-metal-based nanostructured hard films Part I-Nitrides
19. ASTM Designation C1624-05, Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing, ASTM International, 2010.
20. Mattox · 2010