journal article·2020-10

Electrochemical behavior of (Cr, W, Al, Ti, Si)N multilayer coating on nitrided AISI 316L steel in natural seawater

Q.W. Ye, Y. Li, M.Y. Zhang, S.Z. Zhang, Y.J. Bi, X.P. Gao, Y.Y. He

Ceramics International· Volume 46· Issue 14
Publisher page

Abstract

Abstract AISI 316L steel is often used in materials applied toward nuclear power but are subjected to pitting corrosion in a marine environment. In this study, (Cr, W, Al, Ti, Si)N multilayer coatings were deposited using multi-arc ion plating on the surface of non-nitrided and nitrided AISI 316L steel. The microstructure and corrosion resistance of four different systems were investigated, namely, (i) untreated AISI 316L steel, (ii) plasma nitrided (PN), (iii) coated on an untreated matrix (coating) only, and (iv) coated on nitrided (hybrid) specimens. The phase structures, morphologies, and compositions of the different specimens were characterized using X-ray diffraction, transmission electron microscope, Atomic Force Microscope, scanning electron microscope, X-ray photoelectron spectroscopy, and energy dispersive x-ray spectroscopy. The results show that a thin CrWAlTiSiN multilayer coating, approximately 2.3 μm in thickness, is deposited on the surface of an ~12 μm nitrided layer. Potentio-dynamic polarization and electrochemical impedance spectroscopy were used to evaluate the assessment of the electrochemical behavior in the natural seawater of China's Yellow Sea. The hybrid specimens exhibited excellent corrosion resistance compared to both the nitrided and coated specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
2. A review of irradiation effects on LWR core internal materials – IASCC susceptibility and crack growth rates of austenitic stainless steels10.1016/j.jnucmat.2010.12.001 ↗
3. Corrosion behaviour of low temperature nitrided nickel-free, AISI 200 and AISI 300 series austenitic stainless steels in NaCl solution10.1016/j.corsci.2018.03.026 ↗
4. Influence of the individual microstructural features on pitting corrosion in type 304 austenitic stainless steel10.1016/j.corsci.2019.108091 ↗
5. A new design of in situ Ti(C,N) reinforced composite coatings and their microstructures, interfaces, and wear resistances10.1021/acsami.7b17286 ↗
6. Temperature-dependent wear mechanisms for magnetron-sputtered AlTiTaN hard coatings10.1021/am503942x ↗
7. Micro-abrasive wear behavior of nitrided and multilayer coated high vanadium powder metallurgy alloy10.1007/s11661-019-05621-2 ↗
8. Corrosion behaviour of CrN/Cr multilayers on stainless steel deposited by unbalanced magnetron sputtering10.1016/j.vacuum.2012.01.016 ↗
9. Erosion–corrosion wear of Cr/CrN multi-layer coating deposited on AISI-304 stainless steel using the unbalanced magnetron (UBM) sputtering system10.1016/j.wear.2012.04.007 ↗
10. Tribocorrosion behaviors of CrN coating in 3.5wt% NaCl solution10.1016/j.tsf.2016.12.023 ↗
11. Improved corrosion resistance and mechanical properties of CrN hard coatings with an atomic layer deposited Al2O3 interlayer10.1021/acsami.5b08696 ↗
12. Investigation of the tribological and biomechanical properties of CrAlTiN and CrN/NbN coatings on SST 30410.1016/j.ceramint.2017.03.081 ↗
13. Toward high load bearing capacity and corrosion resistance Cr/Cr2N nano-multilayer coatings against seawater attack10.1016/j.surfcoat.2015.10.016 ↗
14. Wear behavior of graded Cr-CrN-Cr(1−x)Al(x)N coatings synthesized by closed-field unbalanced magnetron sputtering for advanced machining operations10.1016/j.ceramint.2018.01.199 ↗
15. Interfacial structure, mechanical properties and thermal stability of CrAlSiN/CrAlN multilayer coatings10.1016/j.matchar.2017.01.010 ↗
16. Optimization of Cr-Al-N coating by multilayer architecture with TiSiN insertion layer10.1016/j.jallcom.2017.09.096 ↗
17. Thermal stability and oxidation resistance of Cr1−xAlxN coatings with single phase cubic structure10.1116/1.4930424 ↗
18. Highly corrosion resistant and sandwich-like Si3N4/Cr-CrNx/Si3N4 coatings used for solar selective absorbing applications10.1021/acsami.6b11607 ↗
19. The structure and tribological behaviors of CrN and Cr–Ti–N coatings10.1016/j.apsusc.2007.02.061 ↗
20. Scratch adhesion and tribological behaviour of graded Cr/CrN/CrTiN coatings synthesized by closed-field unbalanced magnetron sputtering10.1016/j.wear.2017.03.020 ↗
21. Understanding the corrosion and tribological behaviors of CrSiN coatings with various Si contents in HCl solution10.1016/j.triboint.2018.11.018 ↗
22. Effect of Si addition to CrN coatings on the corrosion resistance of CrN/stainless steel coating/substrate system in a deaerated 3.5 wt.% NaCl solution10.1016/j.surfcoat.2007.04.005 ↗
23. Comparative studies on the thermal stability and corrosion resistance of CrN, CrSiN, and CrSiN∕AlN coatings10.1116/1.3155396 ↗
24. Microstructure, wear and oxidation resistance of CrWN glass molding coatings synthesized by plasma enhanced magnetron sputtering10.1016/j.vacuum.2020.109206 ↗
25. Mechanical properties of hard chromium tungsten nitride coatings10.1016/S0257-8972(99)00541-1 ↗
26. Comparison in mechanical and tribological properties of Cr–W–N and Cr–Mo–N multilayer films deposited by DC reactive magnetron sputtering10.1016/j.surfcoat.2007.09.006 ↗
27. Microstructural and tribological characterisation of a nitriding/TiAlN PVD coating duplex treatment applied to M2 High Speed Steel tools10.1016/j.surfcoat.2015.03.034 ↗
28. Investigation of lubricated rolling sliding behaviour of WC/C, WC/C-CrN, DLC based coatings and plasma nitriding of steel for possible use in worm gearing10.1016/j.wear.2017.02.029 ↗
29. Structure and mechanical properties of chromium nitride/S-phase composite coatings deposited on 304 stainless steel10.1016/j.tsf.2019.01.046 ↗
30. Microstructures and mechanical properties of duplex-treated composite ceramic coatings with and without compound layer10.1016/j.ceramint.2014.10.074 ↗
31. Structure and tribocorrosion properties of duplex treatment coatings of TiSiCN/nitride on Ti6Al4V alloy10.1016/j.ceramint.2019.03.180 ↗
32. In-situ fabrication of novel (Ti, Cr)-N/aluminide multilayer coatings by plasma nitriding Ti-Cr coated Al alloy10.1016/j.ceramint.2018.01.182 ↗
33. Structural, mechanical and tribological properties of Ti and TiN coatings on 316L stainless steel10.1016/j.ceramint.2018.05.022 ↗
34. Synergistic effect of plasma nitriding and bias voltage on the adhesion of diamond-like carbon coatings on M2 steel by PECVD10.1016/j.surfcoat.2019.06.014 ↗
35. Effects of duplex nitriding and TiN coating treatment on wear resistance, corrosion resistance and biocompatibility of Ti6Al4V alloy10.1007/s11665-017-2815-3 ↗
36. Microstructure, mechanical and adhesive properties of CrN/CrTiAlSiN/WCrTiAlN multilayer coatings deposited on nitrided AISI 4140 steel10.1016/j.matchar.2018.11.017 ↗
37. Surface properties of nitrided layer on AISI 316L austenitic stainless steel produced by high temperature plasma nitriding in short time10.1016/j.apsusc.2014.01.177 ↗
38. Low temperature plasma nitriding of 316 stainless steel - nature of S phase and its thermal stability10.1179/026708401101517746 ↗
39. Effect of electric potentials on microstructure, corrosion and wear characteristic of the nitrided layer prepared on 2Cr13 stainless steel by plasma nitriding10.1007/s40195-018-0836-z ↗
40. The influence of stacking fault energy on plasticity mechanisms in triode-plasma nitrided austenitic stainless steels: implications for the structure and stability of nitrogen-expanded austenite10.1016/j.actamat.2018.10.019 ↗
41. Co-existence of γ'N phase and γN phase on nitrided austenitic Fe–Cr–Ni alloys- I. experiment10.1016/j.actamat.2019.07.019 ↗
42. Microstructural characterization of plasma nitrided austenitic stainless steel10.1016/S0257-8972(00)00905-1 ↗
43. Microstructure in a plasma-nitrided Fe–18 mass% Cr alloy10.1016/j.actamat.2006.06.006 ↗
44. Thermal stability and phase decomposition of nitrided layers on 316L and 310 austenitic stainless steels10.1016/j.surfcoat.2017.07.014 ↗
45. Tribological properties and wear mechanisms of DC pulse plasma nitrided austenitic stainless steel in dry reciprocating sliding tests10.1016/j.wear.2016.12.022 ↗
46. Structural and magnetic characterization of plasma ion nitrided layer on 316L stainless steel alloy10.1016/j.nimb.2009.01.076 ↗
47. Microstructural characterization of pulsed plasma nitrided 316L stainless steel10.1016/j.msea.2011.09.055 ↗
48. Atomic layer deposition of WNx thin films using a F-free tungsten metal-organic precursor and NH3 plasma as a Cu-diffusion barrier10.1016/j.tsf.2019.06.051 ↗
49. Chemical and structural characterization of tungsten nitride (WNx) thin films synthesized via Gas Injection Magnetron Sputtering technique10.1016/j.vacuum.2019.04.020 ↗
50. Microstructures and properties of novel nanocomposite WNx coatings deposited by reactive magnetron sputtering10.1016/j.apsusc.2020.145508 ↗
51. Structure and mechanical properties of graded Cr/CrN/CrTiN coatings synthesized by close field unbalanced magnetron sputtering10.1016/j.surfcoat.2016.10.087 ↗
52. Designing superhard, self-toughening CrAlN coatings through grain boundary engineering10.1016/j.actamat.2012.06.049 ↗
53. Identification of MnCr2O4 nano-octahedron in catalysing pitting corrosion of austenitic stainless steels10.1016/j.actamat.2010.05.043 ↗
54. A comparative investigation of the corrosion and tribocorrosion behaviour of nitrocarburized, gas nitrided, fluidized-bed nitrided, and plasma nitrided plastic mould steel10.1016/j.surfcoat.2017.11.033 ↗
55. Corrosion and interfacial contact resistance behavior of electrochemically nitrided 316L SS bipolar plates for proton exchange membrane fuel cells10.1016/j.energy.2017.05.086 ↗
56. Role of surface mechanical attrition treatment and chemical etching on plasma nitriding behavior of AISI 304L steel10.1016/j.surfcoat.2016.07.020 ↗
57. Comparative corrosion resistance of plasma-based low-energy nitrogen ion implanted austenitic stainless steel10.1016/j.surfcoat.2006.09.018 ↗
58. Electrolytic deposition of Ni–Co–SiC nano-coating for erosion-enhanced corrosion of carbon steel pipes in oilsand slurry10.1016/j.surfcoat.2010.11.035 ↗
59. Improving corrosion resistance of Ti–6Al–4V alloy through plasma-assisted PVD deposited nitride coatings10.1016/j.corsci.2014.07.047 ↗
60. Effect of deposition method on tribological performance and corrosion resistance characteristics of Cr x N coatings deposited by physical vapor deposition10.1016/j.tsf.2017.06.013 ↗
61. Stainless-steel corrosion and MnS inclusions10.1038/424389b ↗
62. Corrosion resistance properties of glow-discharge nitrided AISI 316L austenitic stainless steel in NaCl solutions10.1016/j.corsci.2005.06.006 ↗
63. Application of Mössbauer spectroscopy to the study of corrosion resistance in NaCl solution of plasma nitrided AISI 316L stainless steel10.1016/j.surfcoat.2007.12.040 ↗
64. Corrosion behavior of new quaternary ZrNbTiAl alloys in simulated physiological solution using electrochemical techniques and surface analysis methods10.1016/j.electacta.2017.07.157 ↗
65. Electrochemical characteristics of steel coated with TiN and TiAlN coatings10.1016/S0010-938X(00)00057-3 ↗
66. Improvement of the corrosion resistance of PVD hard coating–substrate systems10.1016/S0257-8972(99)00551-4 ↗
67. The corrosion protection ability of TiAlN coatings produced with CA-PVD under superimposed pulse bias10.1016/j.surfcoat.2018.04.034 ↗
68. Structure, phase transformation and corrosion resistance of CrAlN/CNx composite multilayer films in NaCl aqueous solution10.1016/j.ceramint.2019.08.169 ↗