journal article·2020-10

Preferentially oriented SiC/graphene composites for enhanced mechanical and thermal properties

Chen Chen, Xiaochun Han, Huahai Shen, Yongqiang Tan, Haibin Zhang, Yi Qin, Shuming Peng

Ceramics International· Volume 46· Issue 14
Publisher page

Abstract

Abstract Dense SiC ceramics with a high alignment of graphene nanoplatelets (GNPs) were fabricated via a liquid-phase hot pressing (HP) process. The effects of GNPs on the phase composition, microstructure evolutions, mechanical and thermal properties of SiC ceramics were analyzed in detail. As the GNPs content increased from 0 to 3 wt %, the density and hardness of the SiC/GNPs composites decreased monotonically, whereas the flexural strength, fracture toughness and thermal conductivity increased initially and then decreased. The decrease in density and hardness is due to the low density and low hardness of GNPs themselves. The increase in thermal conductivity is mainly due to electron thermal transmission and the widening effect of phonon thermal transmission channel by the textured GNPs. The main strengthening and toughening mechanisms include fine grain strengthening, dislocation strengthening, crack bridging, crack deflection and crack termination. The SiC/GNPs composites sintered under uniaxial pressure condition (HP) display anisotropic thermal and mechanical properties. The anisotropic thermal conductivities of the SiC/GNPs composites are likely due to in plane GNPs parallel to the direction of heat flow, while through plane GNPs are perpendicular to the direction of heat flow. The anisotropy in mechanical properties of the SiC/GNPs composites are due to the through plane GNPs preferentially oriented to intersect the cracks, while the in plane GNPs preferentially oriented to parallel the cracks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Thermal properties of materials · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. High temperature strength of silicon carbide sintered with 1 wt. % aluminum nitride and lutetium oxide10.1016/j.jeurceramsoc.2012.09.005 ↗
2. Highly conductive SiC ceramics containing Ti2CN10.1016/j.jeurceramsoc.2013.11.001 ↗
3. Resistance to thermal shock and to oxidation of metal diborides–SiC ceramics for aerospace application10.1111/j.1551-2916.2007.01589.x ↗
4. A route for the pressureless liquid-phase sintering of SiC with low additive content for improved sliding-wear resistance10.1016/j.jeurceramsoc.2011.10.052 ↗
5. Investigation of the effect of Al2O3–Y2O3–CaO (AYC) additives on sinterability, microstructure and mechanical properties of SiC matrix composites: a review10.1016/j.ijrmhm.2018.08.008 ↗
6. Synthesis of monolithic SiC aerogels with high mechanical strength and low thermal conductivity10.1016/j.ceramint.2019.02.216 ↗
7. Effect of oxygen content on the sintering behaviour and mechanical properties of SiC ceramics10.1016/j.ceramint.2019.08.100 ↗
8. Atomistic modeling of thermo-mechanical properties of cubic SiC10.1111/jace.15712 ↗
9. Fabrication of two-layer SiC nanowire cladding tube with high thermal conductivity10.1016/j.jeurceramsoc.2020.03.040 ↗
10. SiC cladding thermal conductivity requirements for normal operation and LOCA conditions10.1016/j.pnucene.2018.03.016 ↗
11. Improvement of the electromagnetic shielding properties of C/SiC composites by electrophoretic deposition of carbon nanotube on carbon fibers10.1016/j.carbon.2016.07.070 ↗
12. Mechanical and electromagnetic shielding properties of carbon fiber reinforced silicon carbide matrix composites10.1016/j.carbon.2015.08.011 ↗
13. Fabrication and characterization of fully ceramic microencapsulated fuels10.1016/j.jnucmat.2012.03.049 ↗
14. Microencapsulated fuel technology for commercial light water and advanced reactor application10.1016/j.jnucmat.2012.05.021 ↗
15. Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites10.1016/j.ceramint.2018.10.187 ↗
16. The effect of TiO2 additive on sinterability and properties of SiC-Al2O3-Y2O3 composite system10.1016/j.ceramint.2018.06.073 ↗
17. SiC matrix composites reinforced with internally synthesized TiB210.1007/BF00544201 ↗
18. Effects of SiC whiskers on the mechanical properties and microstructure of SiC ceramics by reactive sintering10.1016/j.ceramint.2017.02.095 ↗
19. Mechanical properties of reaction sintered SiC-TiC composite10.1016/j.ceramint.2018.05.050 ↗
20. Enhanced mechanical properties of SiC/Al composites at cryogenic temperatures10.1016/j.ceramint.2018.10.233 ↗
21. Pressureless sintering behaviour and mechanical properties of Fe2O3-containing SiC ceramics10.1016/j.jallcom.2019.03.166 ↗
22. Influence of interface thermal resistance on thermal conductivity of SiC/Al composites10.1016/j.ceramint.2019.07.358 ↗
23. Elastic properties of chemically derived single graphene sheets10.1021/nl801384y ↗
24. Graphite nanoplatelet-epoxy composites thermal interface materials10.1021/jp071761s ↗
25. Microstructure and mechanical properties of nacre-like alumina toughened by graphene oxide10.1016/j.ceramint.2019.01.013 ↗
26. Fracture toughness and toughening mechanisms in graphene platelet reinforced Si3N4 composites10.1016/j.scriptamat.2012.02.009 ↗
27. Thermal properties of pressure sintered alumina–graphene composites10.1007/s10973-015-4694-x ↗
28. Thermal stability and conductivity of hot-pressed Si3N4–graphene composites
29. A comparative study of mechanical, thermal and electrical properties of graphene-, graphene oxide- and reduced graphene oxide-doped microfibrillated cellulose nanocomposites10.1016/j.compositesb.2018.04.018 ↗
30. Graphene–graphene interactions: friction, superlubricity, and exfoliation10.1002/adma.201705791 ↗
31. Dynamic sliding enhancement on the friction and adhesion of graphene, graphene oxide, and fluorinated graphene10.1021/acsami.7b19518 ↗
32. Thermal conductivity and electrical insulation of epoxy composites with graphene-SiC nanowires and BaTiO310.1016/j.compositesa.2018.10.031 ↗
33. Enhanced fracture toughness of pressureless-sintered SiC ceramics by addition of graphene10.1016/j.jmst.2016.01.009 ↗
34. Enhanced electrical conductivity of silicon carbide ceramics by addition of graphene nanoplatelets10.1016/j.jeurceramsoc.2015.03.044 ↗
35. Spark plasma sintering of graphene reinforced silicon carbide ceramics10.1016/j.ceramint.2017.04.042 ↗
36. A. Rahman, A. Singh, S. Karumuri, S. P. Harimkar, K. A. Kalkan, R. P. Singh, Graphene reinforced silicon carbide nanocomposites: processing and properties, Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, Composite, Hybrid, and Multifunctional Materials, Volume vol. 4: 165-176.10.1007/978-3-319-06992-0_21 ↗
37. Graphene nanoplatelet reinforced boron carbide composites with high electrical and thermal conductivity10.1016/j.jeurceramsoc.2016.04.036 ↗
38. Electrically conductive graphene nanoplatelet/boron carbide composites with high hardness and toughness10.1016/j.scriptamat.2015.12.008 ↗
39. A. Rahman, A. Singh, S. P. Harimkar, R. P. Singh, Spark plasma sintering and characterization of graphene reinforced silicon carbide nanocomposites, Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, Composite Materials and Joining Technologies for Composites, Volume vol. 7: 139-146.10.1007/978-1-4614-4553-1_16 ↗
40. Anisotropic mechanical properties of graphene/copper composites with aligned graphene10.1016/j.msea.2017.12.080 ↗
41. Toughened and machinable glass matrix composites reinforced with graphene and graphene-oxide nano platelets
42. Thermal conductivity of silicon carbide composites with highly oriented graphene nanoplatelets10.1016/j.jeurceramsoc.2016.06.016 ↗
43. Thermal properties of graphene/metal composites with aligned graphene10.1016/j.matdes.2017.11.048 ↗
44. Enhanced thermal conductivity in polymer composites with aligned graphene nanosheets10.1007/s10853-014-8198-z ↗
45. Superior thermal conductivity of single-layer graphene10.1021/nl0731872 ↗
46. Carbon nanotube reinforced alumina-based ceramics with novel mechanical, electrical, and thermal properties10.1111/j.1744-7402.2004.tb00166.x ↗