Improving mechanical properties of porous calcium phosphate scaffolds by constructing elongated gyroid structures using digital light processing
Source abstract
Abstract
Abstract The present study reports the manufacturing of a novel type of porous calcium phosphate scaffolds with elongated gyroid structures using digital light processing (DLP), in order to offer significantly enhanced mechanical properties. In particular, solid camphor was employed as the diluent, in order to offer sufficiently low viscosity at high solid loading for conventional layer-by-layer DLP process. Four types of porous CaP scaffolds with different percent elongation (%EL = 0, 20, 40, and 60) were manufactured, and their porous structures and mechanical properties were characterized. All porous CaP scaffolds showed that CaP walls were elongated along the z-direction, while the degree of pore elongation increased with an increase in the designed %EL. Owing to the use of controlled processing parameters, such as layer thickness and exposure time for layer-by-layer photocuring process, and carefully designed debinding process, the photocured layers could be completely bonded together with high densification after sintering at 1,200 °C for 3 h. Such elongation of a gyroid structure offered significantly enhanced mechanical properties − compressive strengths of 4.33 ± 0.26 MPa and 11.51 ± 1.75 MPa were obtained for the porous CaP scaffold with the %EL of 0 and 60, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Regeneration of trabecular bone using porous ceramics10.1016/j.cossms.2003.09.012 ↗
2. Bioceramic bone graft substitutes: Influence of porosity and chemistry10.1111/j.1744-7402.2005.02020.x ↗
3. Biphasic, triphasic and multiphasic calcium orthophosphates10.1016/j.actbio.2011.09.003 ↗
4. Calcium phosphate-based osteoinductive materials10.1021/cr800427g ↗
5. Toward strong and tough glass and ceramic scaffolds for bone repair10.1002/adfm.201301121 ↗
6. Freezing as a path to build complex composites10.1126/science.1120937 ↗
7. Freeze casting of hydroxyapatite scaffolds for bone tissue engineering10.1016/j.biomaterials.2006.06.028 ↗
8. Aligned porous alumina ceramics with high compressive strengths for bone tissue engineering10.1016/j.scriptamat.2007.11.006 ↗
9. Compressive strength and processing of camphene-based freeze cast calcium phosphate scaffolds with aligned pores10.1016/j.matlet.2009.04.013 ↗
10. Bone tissue engineering using 3D Printing10.1016/j.mattod.2013.11.017 ↗
11. Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing10.1016/j.actbio.2010.09.039 ↗
12. Bioinspired strong and highly porous glass scaffolds10.1002/adfm.201002030 ↗
13. Freeze extrusion fabrication of 13-93 bioactive glass scaffolds for bone repair10.1007/s10856-011-4236-4 ↗
14. Porous and strong bioactive glass (13-93) scaffolds fabricated by freeze extrusion technique10.1016/j.msec.2011.06.004 ↗
15. Mechanical properties of bioactive glass (13-93) scaffolds fabricated by robotic deposition for structural bone repair10.1016/j.actbio.2013.02.026 ↗
16. Influence of additive manufactured scaffold architecture on the distribution of surface strains and fluid flow shear stresses and expected osteochondral cell differentiation10.3389/fbioe.2017.00006 ↗
17. Design and fabrication of a novel porous implant with pre-set channels based on ceramic stereolithography for vascular implantation10.1088/1758-5082/3/3/034103 ↗
18. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization10.1146/annurev-matsci-070115-031841 ↗
19. Lithography-based additive manufacturing of cellular ceramic structures10.1002/adem.201200010 ↗
20. Additive manufacturing of ceramics: issues, potentialities, and opportunities10.1111/jace.13700 ↗
21. Processing of 45S5 Bioglass (R) by lithography-based additive manufacturing10.1016/j.matlet.2012.01.019 ↗
22. Additive manufacturing of bioactive glasses and silicate bioceramics
23. Stereolithographic ceramic manufacturing of high strength bioactive glass10.1111/ijac.12325 ↗
24. Porous 45S5 Bioglass®-based scaffolds using stereolithography: Effect of partial pre-sintering on structural and mechanical properties of scaffolds10.1016/j.msec.2017.03.001 ↗
25. Digital light processing of wollastonite-diopside glass-ceramic complex structures10.1016/j.jeurceramsoc.2018.06.004 ↗
26. Stabilization of tricalcium phosphate slurries against sedimentation for stereolithographic additive manufacturing and influence on the final mechanical properties10.1111/ijac.12664 ↗
27. 3D printing of hydroxyapatite scaffolds with good mechanical and biocompatible properties by digital light processing10.1007/s10853-018-1992-2 ↗
28. Digital light processing of freeze-cast ceramic layers for macroporous calcium phosphate scaffolds with tailored microporous frameworks10.3390/ma12182893 ↗
29. Finite element study of scaffold architecture design and culture conditions for tissue engineering10.1016/j.biomaterials.2009.07.041 ↗
30. Porous scaffold design using the distance field and triply periodic minimal surface models10.1016/j.biomaterials.2011.07.019 ↗
31. Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting10.1016/j.jmbbm.2015.06.024 ↗
32. Additively manufactured metallic porous biomaterials based on minimal surfaces: a unique combination of topological, mechanical, and mass transport properties10.1016/j.actbio.2017.02.024 ↗
33. Porous scaffold internal architecture design based on minimal surfaces: A compromise between permeability and elastic properties10.1016/j.matdes.2017.04.009 ↗
34. Photocurable ceramic slurry using solid camphor as novel diluent for conventional digital light processing (DLP) process10.1016/j.jeurceramsoc.2019.05.069 ↗