journal article·2021-03

Oxygen vacancy-rich black TiO2 nanoparticles as a highly efficient catalyst for Li–O2 batteries

Juanjuan Ge, Gaohui Du, Abul Kalam, Xiang Bi, Shukai Ding, Qingmei Su, Bingshe Xu, Abdullah G. Al-Sehemi

Ceramics International· Volume 47· Issue 5
Publisher page

Abstract

Abstract Lithium-oxygen batteries (LOBs) have been extensively studied as an attractive secondary battery due to their ultra-high energy density. However, its high charging voltage, poor cycle stability, and low rate performance make its practical applications very limited. Since the positive electrode is the main reaction site of LOBs, improving the structure and catalytic activity of the cathode catalyst is the key method to improve the electrochemical performance. In this work, colored titanium dioxide nanoparticles were synthesized by calcination in argon. Raman and XPS confirmed the existence of more oxygen vacancies and Ti3+ in black TiO2 than gray one. HRTEM analysis also reveals the defective layers of 2–3 nm on the TiO2 surface. Due to the high electrical conductivity and good catalytic activity promoted by oxygen vacancies and Ti3+ ions, the black TiO2-based cathodes have good electrochemical activity and enhanced cycling stability for LOBs. Compared with the gray TiO2 (4.3 V), the black TiO2 nanoparticles show a low overpotential with the charge voltage of 3.7 V. The charging voltage significantly reduced approximately 600 mV, which reduces the battery's side reactions and polarization, and thus enhances the cycling performance of the battery. When the cut-off capacity is 500 mAh g−1, it can run for 108 cycles without significant change in terminal voltage, indicating that black TiO2 is an efficient catalyst for LOBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Advances in understanding mechanisms underpinning lithium-air batteries10.1038/nenergy.2016.128 ↗
2. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
3. A critical review on lithium-air battery electrolytes10.1039/c3cp54165g ↗
4. Li+ pre-insertion leads to formation of solid electrolyte interface on TiO2 nanotubes that enables high-performance anodes for sodium ion batteries10.1002/aenm.201903448 ↗
5. Key challenges in future Li-battery research
6. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
7. Monodisperse SnSb nanocrystals for Li-ion and Na-ion battery anodes: synergy and dissonance between Sn and Sb10.1039/C4NR05604C ↗
8. High anodic performance of Co 1,3,5-benzenetricarboxylate coordination polymers for Li-ion battery10.1021/acsami.6b03648 ↗
9. Porous titanium oxide microspheres as promising catalyst for lithium-oxygen batteries10.1002/ente.201901257 ↗
10. Aprotic and aqueous Li-O2 batteries10.1021/cr400573b ↗
11. Prospects and limits of energy storage in batteries10.1021/jz5026273 ↗
12. The lithium/air battery: still an emerging system or a practical reality?10.1002/adma.201403064 ↗
13. A critical review on lithium-air battery electrolytes10.1039/c3cp54165g ↗
14. Understanding the reaction chemistry during charging in aprotic lithium-oxygen batteries: existing problems and solutions10.1002/adma.201804587 ↗
15. Textile inspired lithium-oxygen battery cathode with decoupled oxygen and electrolyte pathways10.1002/adma.201704907 ↗
16. Tuning Li2O2 formation routes by facet engineering of MnO2 cathode catalysts10.1021/jacs.9b05992 ↗
17. Facile synthesis of hierarchical porous three-dimensional free-standing MnCo2O4 cathodes for long-life Li-O2 batteries10.1021/acsami.6b16090 ↗
18. Single-crystalline ultrathin 2D TiO2 nanosheets: a bridge towards superior photovoltaic devices, Mater
19. Flexible lithium-oxygen battery based on a recoverable cathode10.1038/ncomms8892 ↗
20. Room-temperature synthesis of yellow TiO2 nanoparticles with enhanced photocatalytic properties, Appl10.1016/j.apsusc.2020.145617 ↗
21. Doping of TiO2 polymorphs for altered optical and photocatalytic properties
22. Enhanced cyclability of LiO2 batteries based on TiO2 supported cathodes with no carbon or binder10.1021/cm5004966 ↗
23. Effect of Ti3+ ions and conduction band electrons on photocatalytic and photoelectrochemical activity of rutile titania for water oxidation10.1021/acs.jpcc.6b01481 ↗
24. Electrical properties and defect chemistry of TiO2 single crystal. I. Electrical conductivity10.1021/jp0606210 ↗
25. Electronic conduction above 4K of slightly reduced oxygen-deficient rutile TiO2-x10.1103/PhysRevB.54.7945 ↗
26. Defective titanium dioxide single crystals exposed by high-energy {001} facets for efficient oxygen reduction10.1038/ncomms9696 ↗
27. O2 adsorption and dissociation on a hydrogenated anatase (101) surface10.1021/jp408221x ↗
28. Hydrogenated TiO2 nanotube arrays for supercapacitors10.1021/nl300173j ↗
29. Sulfur cathodes with hydrogen reduced titanium dioxide inverse opal structure10.1021/nn501308m ↗
30. X-ray photoelectron spectroscopy analysis of nitrogen-doped TiO2 films prepared by reactive-ion-beam sputtering with various NH3/O2 gas mixture ratios10.3390/coatings10010047 ↗
31. Increasing solar absorption for photocatalysis with black hydrogenated titanium dioxide nanocrystals10.1126/science.1200448 ↗
32. Raman spectroscopy characterization of TiO2 rutile nanocrystals10.1103/PhysRevB.75.045416 ↗
33. Effect of chlorine atmosphere on the anatase-rutile transformation10.1111/j.1151-2916.1992.tb04367.x ↗
34. Effect of calcination on band gaps for electrospun titania nanofibers heated in air-argon mixtures10.1016/j.matdes.2015.12.044 ↗
35. Hydrogen-treated TiO2 nanowire arrays for photoelectrochemical water splitting10.1021/nl201766h ↗
36. Synergistic effect of surface and bulk single-electron-trapped oxygen vacancy of TiO2 in the photocatalytic reduction of CO210.1016/j.apcatb.2017.01.025 ↗
37. Effect of nature and location of defects on bandgap narrowing in black TiO2 nanoparticles10.1021/ja3012676 ↗