Material removal mechanisms of ceramics turned by abrasive waterjet (AWJ) using a novel approach
Source abstract
Abstract
Abstract Ceramics are the most typical difficult-to-machine materials for high-performance applications. The paper utilized AWJ to turn the alumina ceramics. A prediction model of the depth of penetration (DOP) after AWJ turning of alumina ceramic was established. The variation trends of predicted and experimental results with respect to process parameters were consistent. Within the range of this study, it may be stated that the developed model can achieve good predictions both qualitatively and quantitatively. The material removal mechanism of alumina ceramics turned by AWJ was also analyzed. The turned surface topography analysis showed that the main removal mechanism of alumina ceramics in turning was plastic shearing at a shallow nozzle tilt angle but brittle fracture at a larger nozzle tilt angle. Through the analysis of chip morphology during AWJ turning, it was proved that the removal mechanism of ceramics turned by AWJ was mixed (brittle fracture and plastic shear). Gained predicted model and material removal mechanisms will provide more details to understand and improve the AWJ turning technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior · Coal Combustion and Slurry Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Grinding of hard and brittle materials10.1016/S0007-8506(07)60748-3 ↗
2. Single point diamond turning effects on surface quality and subsurface damage in ceramics
3. Impact abrasive machining
4. Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box–Behnken design10.1016/j.ceramint.2013.12.137 ↗
5. Study on the effect of standoff distance on processing performance of alumina ceramics in two modes of abrasive waterjet turning patterns10.4028/www.scientific.net/AMR.797.21 ↗
6. Abrasive waterjet turning—an efficient method to profile and dress grinding wheels10.1016/j.ijmachtools.2008.11.006 ↗
7. On the modeling of abrasive waterjet turning
8. Effect of abrasive waterjet parameters on volume removal trends in turning10.1115/1.2803524 ↗
9. Flow visualization study of the macromechanics of abrasive-waterjet turning10.1007/BF02325589 ↗
10. Development of a parameter prediction model for abrasive waterjet turning
11. Modeling of turning operation for abrasive waterjets
12. An erosion-based model for abrasive waterjet turning of ductile materials10.1016/j.wear.2009.02.008 ↗
13. Influence of jet impact angle on part geometry in abrasive waterjet turning of aluminium alloys
14. Erosion of surfaces by solid particles10.1016/0043-1648(60)90055-7 ↗
15. An erosion-based modeling of abrasive waterjet Turning
16. Surface waviness in abrasive waterjet offset-mode turning10.4028/www.scientific.net/AMM.599-601.555 ↗
17. Modeling of surface waviness in abrasive waterjet offset-mode turning10.4028/www.scientific.net/AMM.621.202 ↗
18. An experimental study of radial-mode abrasive waterjet turning of steels
19. An investigation into the radial-mode abrasive waterjet turning process on high tensile steels10.1016/j.ijmecsci.2013.05.005 ↗
20. A surface roughness model in radial-mode abrasive waterjet turning for high-tensile steels10.4028/www.scientific.net/AMM.483.177 ↗
21. Turning with abrasive-waterjets—a first investigation10.1115/1.3187130 ↗
22. Observations on precision turning with AWJ
23. Turning of glass with abrasive waterjet10.1081/AMP-120005380 ↗
24. Abrasive waterjet turning of high performance materials10.1016/j.procir.2012.04.073 ↗
25. Hardness measurement of surfaces on hybrid metal matrix composite created by turning using an abrasive water jet and WED10.1016/j.measurement.2018.09.026 ↗
26. An experimental study on radial-mode abrasive waterjet turning of alumina ceramics10.4028/www.scientific.net/AMR.797.27 ↗
27. Material removal analysis in the radial-mode abrasive waterjet turning of ceramic materials10.1504/IJAT.2014.065830 ↗
28. A study on the abrasive waterjet milling mechanisms of ceramic materials10.4028/www.scientific.net/KEM.431-432.261 ↗