Preparation of YbAlN piezoelectric thin film by sputtering and influence of Yb concentration on properties and crystal structure
Source abstract
Abstract
Abstract Aluminum nitride (AlN) is a key material for piezoelectric micro-electromechanical systems (MEMS). Since the discovery of the increase in AlN piezo performance by scandium (Sc) doping, many groups have investigated other effective dopants. However, another effective single dopant has not yet been experimentally demonstrated, although potential effectiveness has been indicated by theoretical calculations. In this study, we propose ytterbium (Yb) as an effective dopant. The sputtering conditions for YbxAl1 − xN films were optimized by design of experiments (DoE). Consequently, high-quality YbxAl1 − xN films were obtained. YbxAl1 − xN with x values ranging from 0 to 0.37 demonstrate good piezo response. A maximum d33 of ~12 pC/N, which is approximately twice the value of non-doped AlN, is achieved. According to crystallographic analysis using X-ray diffraction, the influence of Yb concentration on the crystal structure was similar to that of Sc with differences observed at high Yb concentration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies · GaN-based semiconductor devices and materials · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A review of thin-film resonator technology10.1109/MMW.2003.1266067 ↗
2. Thin film resonator technology10.1109/TUFFC.2005.1503959 ↗
3. Materials for high temperature acoustic and vibration sensors: A review10.1016/0003-682X(94)90091-4 ↗
4. Piezoelectric aluminum nitride thin films for microelectromechanical systems10.1557/mrs.2012.268 ↗
5. Thin-film piezoelectric MEMS10.1557/mrs.2012.273 ↗
6. Thin film piezoelectrics for MEMS10.1023/B:JECR.0000033998.72845.51 ↗
7. Enhancement of piezoelectric response in scandium aluminum nitride alloy thin films prepared by dual reactive cosputtering10.1002/adma.200802611 ↗
8. Influence of growth temperature and scandium concentration on piezoelectric response of scandium aluminum nitride alloy thin films10.1063/1.3251072 ↗
9. Highly piezoelectric co-doped AlN thin films for wideband FBAR applications10.1109/TUFFC.2014.006846 ↗
10. Dopant concentration dependence of electromechanical coupling coefficients of co-doped AlN thin films for BAW devices
11. Giant increase in piezoelectric coefficient of AlN by Mg-Nb simultaneous addition and multiple chemical states of Nb10.1063/1.4990533 ↗
12. Microstructure and piezoelectric response of YxAl1−xN thin films10.1016/j.actamat.2015.08.019 ↗
13. Tuning the piezoelectric and mechanical properties of the AlN system via alloying with YN and BN10.1063/1.4993254 ↗
14. Enhanced piezoelectric response of AlN via CrN alloying10.1103/PhysRevApplied.9.034026 ↗
15. Enhancement of piezoelectric response of diluted Ta doped AlN10.1016/j.apsusc.2013.01.005 ↗
16. Preparation and characterization of Er-doped AlN films by RF magnetron sputtering10.1016/j.matlet.2017.12.111 ↗
17. Piezoelectric alloy films
18. ScAlN polarization inverted resonators and enhancement of kt2 in new YbAlN materials for BAW devices
19. Preparation of scandium aluminum nitride thin films by using scandium aluminum alloy sputtering target and design of experiments10.2109/jcersj2.118.1166 ↗
20. Plasma surface hardening of ASSAB 760 steel specimens with Taguchi optimisation of the processing parameters10.1016/S0924-0136(01)00583-0 ↗
21. Selection of amine combination for CO2 capture in a packed bed scrubber10.1016/j.reffit.2016.11.014 ↗
22. Optimization of continuous-flow heterogeneous catalytic oligomerization of 1-butene by design of experiments and response surface methodology
23. Piezoelectric properties of ScAlN thin films for piezo-MEMS devices
24. Reusch · 2015 · 1291
25. Enhanced actuation of nanocrystalline diamond microelectromechanical disk resonators with AlN layers10.1063/1.4948343 ↗
26. Increase in the piezoelectric response of scandium-doped gallium nitride thin films sputtered using a metal interlayer for piezo MEMS10.1063/1.5066613 ↗
27. Synthesis of c-axis-oriented AlN thin films on high-conducting layers: Al, Mo, Ti, TiN, and Ni10.1109/TUFFC.2005.1504003 ↗
28. Implications of heterostructural alloying for enhanced piezoelectric performance of (Al,Sc)N
29. Effect of scandium content on structure and piezoelectric properties of AlScN films deposited by reactive pulse magnetron sputtering10.1016/j.surfcoat.2016.11.083 ↗
30. Origin of the anomalous piezoelectric response in wurtzite ScxAl1-xN alloys10.1103/PhysRevLett.104.137601 ↗
31. First-Principles study of piezoelectric properties and bonding analysis in (Mg, X, Al)N solid solutions (X = Nb, Ti, Zr, Hf)10.1021/acsomega.9b01912 ↗
32. Highly enhanced piezoelectric property of co-doped AlN
33. Influence of scandium concentration on power generation figure of merit of scandium aluminum nitride thin films10.1063/1.4788728 ↗
34. Effects of lattice parameters on piezoelectric constants in wurtzite materials: a theoretical study using first-principles and statistical-learning methods