journal article·2015-11

In-plane shear behaviours of a 2D-SiC/SiC composite under various loading conditions

HongBao Guo, Bo Wang, PuRong Jia, ChengPeng Yang

Ceramics International· Volume 41· Issue 9
Publisher page

Abstract

Abstract Under monotonic, non-reverse and reverse cyclic load conditions, the evolution of the in-plane shear damage and the stress–strain behaviours of a two-dimensional Hi-Nicalon fibre-reinforced silicon carbide composite (2D-SiC/SiC) were investigated using Iosipescu tests. The stress-dependent shear damage evolution of the material was characterised by strain data, which were obtained from strain gauges mounted on the tested specimens. Under cyclic shear loading, the shapes of the hysteresis loops were explained by the fibre bending–bearing mechanism and the crack closure effect. The shear strengths under various loading procedures were also compared and analysed. Finally, SEM (scanning electron microscope) techniques were used to identify the shear failure modes of the tested material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. An experimental and numerical investigation into the damage mechanisms in notched composites10.1016/j.compositesa.2009.02.021 ↗
2. Advanced ceramic matrix composite materials for current and future propulsion technology applications10.1016/j.actaastro.2004.05.052 ↗
3. Potential application of ceramic matrix composites to aero-engine components10.1016/S1359-835X(98)00139-0 ↗
4. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview10.1016/S0266-3538(03)00230-6 ↗
5. R.C. Sung, P.B. Narottam, P.G. John, Dependency of Shear Strength on Test Rate in SiC/BSAS Ceramic Matrix Composite at Elevated Temperature, NASA TM-2003-212182 2003.
6. Matrix cracking in ceramic matrix composites under quasi-static tensile loading10.1016/0956-7151(93)90178-U ↗
7. The stress–strain behaviour of a porous unidirectional ceramic matrix composite10.1016/0010-4361(95)91379-J ↗
8. Relationship between hysteresis measurements and the constituent properties of ceramic matrix composites: I. Theory10.1111/j.1151-2916.1995.tb08046.x ↗
9. Strain and hysteresis by stochastic matrix cracking in ceramic matrix composites10.1016/S0022-5096(96)00081-6 ↗
10. An approach to estimate interface shear stress of ceramic matrix composites from hysteresis loop10.1007/s10443-009-9122-6 ↗
11. Characterization of tensile behavior of a two-dimensional woven carbon/silicon carbide composite fabricated by chemical vapor infiltration10.1016/j.msea.2008.07.050 ↗
12. In-plane and interlaminar shear strength of a unidirectional Hi-Nicalon fiber-reinforced celsian matrix composite10.1016/S0272-8842(02)00006-8 ↗
13. Comparison of in-plane shear behaviors of 2D plain woven C/SiC composites
14. Shear damage mechanisms in a woven, nicalon-reinforced ceramic-matrix composite10.1111/j.1151-2916.1997.tb02838.x ↗
15. In-plane shear properties of 2-D ceramic matrix composites10.1111/j.1151-2916.1994.tb04644.x ↗
16. Failure and strength of 2D-C/SiC composite under in-plane shear loading at elevated temperature10.1016/j.matdes.2011.02.054 ↗
17. S.S. Wang. A. Dasgupta, Development of losipescu-type test for determining in-plane shear properties of fiber composite materials: critical analysis and experiment, UILU-ENG-86-5021 1986.