Tribocorrosion characteristics of CrMoSiCN/Ag coatings on Ti6Al4V alloys in seawater
Source abstract
Abstract
Abstract CrMoSiCN/Ag coatings were deposited on Ti6Al4V alloys at the trimethylsilane flow of 15 sccm using closed-field unbalanced magnetron sputtering, and their microstructures were observed and analyzed using SEM, XRD, XPS and TEM, respectively. The coatings’ mechanical properties were measured using nano-indenter. The tribocorrosion characteristics of Ti6Al4V and CrMoSiCN/Ag coatings were investigated in seawater using tribocorrosion tester. The results revealed that the nanocomposite coatings consisted of (Cr, Mo)N solid solution, Ag nanocrystal and amorphous SiCNx matrix. As the Ag target current increased to 1.0 A, a large amount of Ag nanoparticles were observed on the coating surface. The coating hardness initially increased to 21.0 ± 0.7 GPa at the Ag target current of 0.4 A and then declined. After the Ag element was added into coatings, their tribocorrosion characteristics were improved. The tribocorrosion characteristics of coatings were much better than those of Ti6Al4V. The tribocorrosion characteristics of CrMoSiCN/Ag coating at the Ag target current of 1.0 A were the best in seawater.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Characterization and mechanical properties investigation of TiN-Ag films onto Ti-6Al-4V10.1016/j.apsusc.2016.01.005 ↗
2. Structure, mechanical and tribological properties of self-toughening TiSiN/Ag multilayer coatings on Ti6Al4V prepared by arc ion plating10.1016/j.apsusc.2016.06.024 ↗
3. Influence of carbon contents on the structure and tribocorrosion properties of TiSiCN coatings on Ti6Al4V10.1016/j.triboint.2017.01.002 ↗
4. Structure and tribocorrosion properties of duplex treatment coatings of TiSiCN/nitride on Ti6Al4V alloy10.1016/j.ceramint.2019.03.180 ↗
5. Tribocorrosion behavior of low friction TiSiCN nanocomposite coatings deposited on titanium alloy for biomedical applications10.1016/j.surfcoat.2018.04.049 ↗
6. Tailoring the tribocorrosion and antifouling performance of (Cr, Cu)-GLC coatings for marine application10.1021/acsami.8b12359 ↗
7. Enhanced tribocorrosion performance of Cr/GLC multilayered films for marine protective application10.1021/acsami.8b00628 ↗
8. Structural and tribological properties of CrMoCN coatings with various Mo contents in artificial seawater10.1016/j.apsusc.2019.06.297 ↗
9. Structural, mechanical and tribocorrosion performances of CrMoSiN coatings with various Mo contents in artificial seawater10.1016/j.apsusc.2020.146629 ↗
10. Electrochemical and tribocorrosion performances of CrMoSiCN coating on Ti-6Al-4V titanium alloy in artificial seawater10.1016/j.corsci.2019.108385 ↗
11. An analysis on tribological performance of CrCN coatings with different carbon contents in seawater10.1016/j.triboint.2015.07.002 ↗
12. Doping carbon to improve the tribological performance of CrN coatings in seawater10.1016/j.triboint.2015.04.008 ↗
13. Influence of carbon concentration on the electrochemical behavior of CrCN coatings in simulated body fluid10.1016/j.surfcoat.2015.01.068 ↗
14. The influence of Mo target current on the microstructure, mechanical and tribological properties of CrMoSiCN coatings in artificial seawater10.1016/j.jallcom.2019.03.351 ↗
15. Influence of trimethylsilane flow on the microstructure, mechanical and tribological properties of CrSiCN coatings in water lubrication10.1016/j.apsusc.2015.07.146 ↗
16. Tribological and electrochemical properties of Cr-Si-C-N coatings in artificial seawater10.1039/C6RA19243B ↗
17. Comparisons of tribological and electrochemical properties of CrSiC and CrSiCN coatings in seawater10.1016/j.surfcoat.2018.02.057 ↗
18. Effect of Ag content on the microstructure, tribological and corrosion properties of amorphous carbon coatings on 316L SS10.1016/j.surfcoat.2013.12.025 ↗
19. Electrochemical response of ZrCN-Ag-a(C,N) coatings in simulated body fluids10.1016/j.electacta.2015.07.083 ↗
20. Dual-doped(Si-Ag) graphite-like carbon coatings with ultra-low friction and high antibacterial activity prepared by magnetron sputtering deposition10.1016/j.diamond.2018.04.016 ↗
21. Influence of Ag contents on structure and tribological properties of TiSiN-Ag nanocomposite coatings on Ti-6Al-4V10.1016/j.apsusc.2016.10.126 ↗
22. Toward low friction in water for Mo2N/Ag coatings by tailoring the wettability10.1016/j.apsusc.2018.04.041 ↗
23. Tribocorrosion performance of nano-layered coating in artificial seawater10.1016/j.apsusc.2019.05.119 ↗
24. The improved corrosion and tribocorrosion properties of TiSiN/Ag by thermal treatment10.1016/j.surfcoat.2020.125437 ↗
25. Influence of Ag target current on the structure and tribological properties of CrMoSiCN/Ag coatings in air and water10.1016/j.triboint.2021.107059 ↗
26. A study of the antimicrobial and tribological properties of TiN/Ag nanocomposite coatings10.1016/j.surfcoat.2009.05.012 ↗
27. Antibacterial behavior of TaN-Ag nanocomposite thin films with and without annealing10.1016/j.surfcoat.2008.06.107 ↗
28. Influence of silver content on structure, mechanical and tribological properties of WCN-Ag films10.1016/j.matchar.2016.02.013 ↗
29. TiSiN(Ag) films deposited by HiPIMS working in DOMS mode: effect of Ag content on structure, mechanical properties and thermal stability10.1016/j.apsusc.2019.01.174 ↗
30. Influence of Ag content on mechanical and tribological behavior of DLC coatings10.1016/j.surfcoat.2013.05.048 ↗
31. Microstructure, mechanical, and tribological properties of Ag-free and Ag-doped VCN coatings10.1016/j.surfcoat.2017.10.036 ↗
32. Structure and mechanical properties of Ag-incorporated DLC films prepared by a hybrid ion beam deposition system10.1016/j.tsf.2007.06.154 ↗
33. Tribological behavior and self-healing functionality of TiNbCN-Ag coatings in wide temperature range10.1016/j.apsusc.2016.10.188 ↗
34. Tribological investigation of adaptive Mo2N/MoS2/Ag coatings with high sulfur content10.1016/j.surfcoat.2008.10.040 ↗