journal article·2021-12

Nd3+-deficiency double perovskite Nd1−BaCo2O5+ and performance optimization as cathode materials for intermediate-temperature solid oxide fuel cells

Xiaowei Liu, Fangjun Jin, Ning Sun, Jiangxin Li, Yu Shen, Fang Wang, Jinhua Li

Ceramics International· Volume 47· Issue 23
Publisher page

Abstract

Abstract The high performance and robust durability of electrode materials are crucial requirements for intermediate-temperature solid oxide fuel cells. This study prepared a new type of Nd1−xBaCo2O5+δ+x/2Bi2O3 (x = 0.05, 0.1; NBC95+B, NBC90+B) composite cathode materials by introducing an Nd defect with bismuth oxide. The introduction of a bismuth oxide trace effectively increased conductivity and reduced the thermal expansion coefficient. The polarization impedance and maximum power density of the NBC95+B cathode were 0.026 Ω cm−2 and 720 mW cm−2 at 800 °C, respectively. The good electrochemical performance of the NBC95+B composite cathode is attributed to the introduction of Nd cation defects and the sub-oxidation state of Bi cations. Furthermore, the NBC95+B cathode exhibited good resistance to carbon dioxide poisoning.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Materials for fuel-cell technologies10.1038/35104620 ↗
2. Recent progress on advanced materials for solid-oxide fuel cells operating below 500 °C10.1002/adma.201770345 ↗
3. Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review10.1007/s10853-008-2966-6 ↗
4. A novel facile strategy to suppress Sr segregation for high-entropy stabilized La0.8Sr0.2MnO3-δ cathode10.1016/j.jpowsour.2020.228959 ↗
5. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
6. Improvement of the electrochemical performance of Ln0.58Sr0.4Fe0.8Co0.2O3-δ IT-SOFC cathodes by ternary lanthanide combinations (La-Pr-Sm)10.1002/fuce.200900166 ↗
7. Achieving fast oxygen diffusion in perovskites by cation ordering10.1063/1.1864244 ↗
8. Synthesis, characterization and evaluation of cation-ordered LnBaCo2O5+δ as materials of oxygen permeation membranes and cathodes of SOFCs10.1016/j.actamat.2008.06.004 ↗
9. Characterization of layered perovskite oxides NdBa1−xSrxCo2O5+δ (x = 0 and 0.5) as cathode materials for IT-SOFC10.1016/j.ijhydene.2011.12.150 ↗
10. LnBaCo2O5+δ oxides as cathodes for intermediate-temperature solid oxide fuel cells10.1149/1.2839028 ↗
11. Layered LnBaCo2O5+δ perovskite cathodes for solid oxide fuel cells: an overview and perspective10.1039/C5TA06212H ↗
12. Layered perovskite GdBaCuCoO5+δ cathode material for intermediate-temperature solid oxide fuel cells10.1149/1.3321725 ↗
13. Effect of calcium doping on Sm1–xCaxBaCo2O5+δ cathode materials for intermediate-temperature solid oxide fuel cells10.1016/j.electacta.2021.138830 ↗
14. Development of double-perovskite compounds as cathode materials for low-temperature solid oxide fuel cells10.1002/anie.201407006 ↗
15. Investigation of layered perovskite NdBa0.5Sr0.25Ca0.25Co2O5+δ as cathode for solid oxide fuel cells10.1016/j.ceramint.2018.03.206 ↗
16. Characterization and evaluation of double perovskites LnBaCoFeO5+δ (Ln = Pr and Nd) as intermediate-temperature solid oxide fuel cell cathodes10.1016/j.jpowsour.2013.05.187 ↗
17. Layered LnBaCo2−xCuxO5+δ (0 ⩽ x ⩽ 1.0) perovskite cathodes for intermediate-temperature solid oxide fuel cells10.1149/1.3527006 ↗
18. Assessment of LnBaCo1.6Ni0.4O5+δ (Ln = Pr, Nd, and Sm) double-perovskites as cathodes for intermediate-temperature solid-oxide fuel cells10.1016/j.jpowsour.2012.08.044 ↗
19. Electrochemical evaluation of double perovskite PrBaCo2-xMnxO5+δ (x = 0, 0.5, 1) as promising cathodes for IT-SOFCs10.1016/j.ijhydene.2018.03.163 ↗
20. Effect of Mn on the electrochemical properties of a layered perovskite NdBa0.5Sr0.5Co2−xMnxO5+δ (x=0, 0.25, and 0.5) for intermediate-temperature solid oxide fuel cells, Electrochim
21. Enhanced electrochemical performance of Ca-doped NdBa1-xCaxCoCuO5+δ as cathode material for intermediate-temperature solid oxide fuel cells10.1016/j.ceramint.2018.08.301 ↗
22. A novel layered perovskite Nd(Ba0.4Sr0.4Ca0.2)Co1.6Fe0.4O5+δ as cathode for proton-conducting solid oxide fuel cells10.1016/j.jpowsour.2019.04.104 ↗
23. Evaluation of Ba deficient NdBaCo2O5+δ oxide as cathode material for IT-SOFC10.1016/j.electacta.2015.09.117 ↗
24. Characterization of Ba-deficient PrBa1−xCo2O5+δ as cathode material for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2012.01.034 ↗
25. Structure and properties of layered-perovskite LaBa1−xCo2O5+δ (x = 0–0.15) as intermediate-temperature cathode material10.1016/j.jpowsour.2013.04.005 ↗
26. A-site Ba-deficiency layered perovskite cathodes for intermediate-temperature solid oxide fuel cells: electrochemical properties and oxygen reduction reaction kinetics10.1016/j.ijhydene.2017.08.049 ↗
27. Effects of Pr3+ -deficiency on structure and properties of PrBaCo2O5+δ cathode material A- comparison with Ba2+-deficiency case10.1016/j.jpowsour.2014.08.091 ↗
28. Synthesis and properties of Sm3+-deficient Sm1−xBaCo2O5+δ perovskite oxides as cathode materials10.1016/j.ijhydene.2014.04.203 ↗
29. Praseodymium-deficiency Pr0.94BaCo2O6-δ double perovskite: a promising high performance cathode material for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2015.06.007 ↗
30. Assessment of PrBaCo2O5+δ+Sm0.2Ce0.8O1.9 composites prepared by physical mixing as electrodes of solid oxide fuel cells10.1016/j.jpowsour.2010.05.018 ↗
31. Performances of LnBaCo2O5+x–Ce0.8Sm0.2O1.9 composite cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2009.10.062 ↗
32. Effects of Bi doping on the microstructure, electrical and electrochemical properties of La2-xBixCu0.5Mn1.5O6-δ (x = 0, 0.1 and 0.2) perovskites as novel cathodes for solid oxide fuel cells10.1016/j.electacta.2017.01.153 ↗
33. Effect of Bi2O3 on the electrochemical performance of LaBaCo2O5+δ cathode for intermediate-temperature solid oxide fuel cells10.1016/j.ceramint.2013.10.074 ↗
34. Ta-doped PrBa0.94Co2-xTaxO5+δ as promising oxygen electrodes: a focused study on catalytic oxygen reduction reaction activity, stability and CO2-durability10.1016/j.jpowsour.2019.02.009 ↗
35. Bismuth doped lanthanum ferrite perovskites as novel cathodes for intermediate-temperature solid oxide fuel cells10.1021/am5017045 ↗
36. The evolution of structure and electrochemical properties of Y-site deficiency Y1-xBaCoCuO5+δ cathode for solid oxide fuel cells10.1016/j.ijhydene.2020.05.118 ↗
37. Influence of sintering temperature on ion dynamics of Na0.5Bi0.5TiO3-δ: suitability as an electrolyte material for SOFC10.1016/j.ijhydene.2019.06.096 ↗
38. Effect of nonequivalent substitution of Pr3+/4+ with Ca2+ in PrBaCoFeO5+δ as cathodes for IT-SOFC10.1007/s10853-020-05375-y ↗
39. Evaluation of Pr1+xBa1-xCo2O5+δ (x = 0–0.30) as cathode materials for solid-oxide fuel cells10.1016/j.electacta.2014.04.064 ↗
40. Expansion of the active area by covering SOFC air: electrodes with Bi2O3 layers10.5796/kogyobutsurikagaku.64.590 ↗
41. A-site bismuth doping, a new strategy to improve the electrocatalytic performances of lanthanum chromate anodes for solid oxide fuel cells10.1016/j.apcatb.2020.118809 ↗
42. Energy levels and photoluminescence properties of nickel-doped bismuth ferrite10.1016/j.jallcom.2010.05.107 ↗
43. Bismuth and niobium co-doped barium cobalt oxide as a promising cathode material for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2015.06.134 ↗
44. Significant zirconium substitution effect on the oxygen reduction activity of the cathode material NdBaCo2O5+δ for solid oxide fuel cells10.1021/acssuschemeng.9b01486 ↗
45. Thermodynamic and electrical properties of layered perovskite NdBaCo2-xFexO5+δ+YSZ (x= 0, 0.5, 1) composites for intermediate temperature SOFC cathodes10.1149/1.3571008 ↗
46. Structural and electrochemical characterization of NdBa1-xCo2-yFeyO5+δ as cathode for intermediate temperature solid oxide fuel cells10.1149/1945-7111/ab628b ↗
47. Charge-transfer modeling and polarization DRT analysis of proton ceramics fuel cells based on mixed conductive electrolyte with the modified anode-electrolyte interface10.1021/acsami.8b10429 ↗
48. Evaluation of calcium codoping in double perovskite PrBaCo2O5+δ as cathode material for IT-SOFCs10.1016/j.electacta.2020.137274 ↗
49. A highly active and CO2-tolerant perovskite cathode for solid oxide fuel cells operating below 700oC10.1016/j.jallcom.2020.157743 ↗
50. A CO2 ‐tolerant perovskite oxide with high oxide ion and electronic conductivity10.1002/adma.201905200 ↗