journal article·2022-01

In-situ preparation of SiC reinforced Si3N4 ceramics aerogels by foam-gelcasting method

Lei Han, Xiaojian Li, Faliang Li, Haijun Zhang, Xueyin Liu, Guangqiang Li, Quanli Jia, Shaowei Zhang

Ceramics International· Volume 48· Issue 1
Publisher page

Abstract

Abstract High strength SiC reinforced Si3N4 ceramics aerogels (SCSNCAs) were fabricated via foam-gelcasting and subsequent catalytic reaction, utilizing industrial Si and melamine as raw materials, a small amount of incidental Fe impurities in Si powder as the catalyst and cetyltrimethylammonium bromide (CTAB, the amount of 0.075 wt%) as foaming agent. The effects of solid loading level and reaction temperature on phase composition, microstructure and mechanical properties of the as-prepared SCSNCAs were examined. The aerogels prepared at 1423 K using a slurry of solid loading level of 30 wt% (Si:melamine = 3:1, mass ratio) had porosity of 91.9%, having compressive and specific strength of 0.8 MPa and 3.8 MPa·cm3·g−1 exhibited the lowest thermal conductivity of 0.066 W/(m·K) at 473 K. Compared with the control sample (without melamine, i.e., Si3N4 aerogels without the formation of SiC), the specific strength of the SCSNCAs increased by about 10%, which was attributed to the additional reinforcement from SiC whiskers formed in the Si3N4 matrix of the aerogels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Preparation of calcium hexaluminate porous ceramics by novel pectin based gelcasting freeze-drying method10.1016/j.ceramint.2020.12.024 ↗
2. One-pot foam-gelcasting/nitridation synthesis of high porosity nano-whiskers based 3D Si3N4 porous ceramics10.1016/j.jeurceramsoc.2021.05.016 ↗
3. The tricritical region for helium mixtures in 0.87 porosity aerogel10.1023/A:1022560518775 ↗
4. Synthesis of silica aerogels from waterglass via new modified ambient drying10.1023/A:1015309014546 ↗
5. Effect of acidity levels and feed rate on the porosity of aerogel extracted from rice husk under ambient pressure10.3390/nano9020300 ↗
6. Preparation and properties of PAN-based carbon fiber-reinforced SiCO aerogel composites10.1016/j.ceramint.2019.05.258 ↗
7. SiBCN ceramic aerogel/graphene composites prepared via sol-gel infiltration process and polymer-derived ceramics (PDCs) route10.1016/j.ceramint.2019.10.267 ↗
8. An ultrasensitive fire-warning chitosan/montmorillonite/carbon nanotube composite aerogel with high fire-resistance10.1016/j.cej.2020.125729 ↗
9. Thermal insulation TiN aerogels prepared by a combined freeze-casting and carbothermal reduction-nitridation technique10.1016/j.jeurceramsoc.2021.01.037 ↗
10. Combustion synthesis of high flexural strength, low linear shrinkage and machinable porous β-Si3N4 ceramics10.1016/j.jeurceramsoc.2020.11.017 ↗
11. Low-temperature preparation of Si3N4 whiskers bonded/reinforced SiC porous ceramics via foam-gelcasting combined with catalytic nitridation10.1016/j.jeurceramsoc.2017.10.043 ↗
12. Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 composite ceramics prepared by gel casting10.1016/j.ceramint.2012.11.005 ↗
13. Dielectric properties of porous SiC/Si3N4 ceramics by polysilazane immersion-pyrolysis10.1016/j.pnsc.2019.03.009 ↗
14. Thermal conductivity of porous Si3N4-bonded SiC sidewall materials in aluminum electrolysis cells10.1111/j.1551-2916.2011.04973.x ↗
15. In situ growth of one-dimensional nanowires on porous PDC-SiC/Si3N4 ceramics with excellent microwave absorption properties10.1016/j.ceramint.2017.07.182 ↗
16. Catalytic effects of metals on direct nitridation of silicon10.1111/j.1151-2916.2001.tb00897.x ↗
17. Ni-catalyzed synthesis of hexagonal plate-like alpha silicon nitride from nitridation of Si powder in molten salt media10.1016/j.apt.2016.05.027 ↗
18. Reaction bonded silicon nitride foams: the influence of iron disilicide on microstructure and mechanical strength10.1016/j.ceramint.2014.12.060 ↗
19. Si3N4-SiCp composites reinforced by in situ co-catalyzed generated Si3N4 nanofibers10.1155/2014/752378 ↗
20. Synthesis of porous Si3N4/SiC ceramics with rapid nitridation of silicon10.1016/j.jeurceramsoc.2015.06.028 ↗
21. Synthesis and textural evolution of mesoporous Si3N4 aerogel with high specific surface area and excellent thermal insulation property via the urea assisted sol-gel technique
22. A novel silica aerogel/porous Si3N4 composite prepared by freeze casting and sol-gel impregnation with high-performance thermal insulation and wave-transparent10.1016/j.matlet.2014.10.012 ↗
23. Effect of Si3N4 solid contents on mechanical and dielectric properties of porous Si3N4 ceramics through freeze-drying10.1016/j.jallcom.2017.10.172 ↗
24. Porosity and strength of silicon carbide foams prepared using preceramic polymers10.1023/A:1020834509443 ↗
25. Resilient Si3N4 nanobelt aerogel as fire-resistant and electromagnetic wave-transparent thermal insulator10.1021/acsami.9b02869 ↗
26. Sturdy, monolithic SiC and Si3N4 aerogels from compressed polymer-cross-linked silica xerogel powders10.1021/acs.chemmater.7b04981 ↗
27. Monolithic silicon nitride-based aerogels with large specific surface area and low thermal conductivity10.1016/j.ceramint.2019.05.160 ↗
28. High thermal conductivity silicon nitride ceramic10.1557/mrs2001.115 ↗