journal article·2022-02

Impact of ultrasonic vibration on microstructure and mechanical properties of diamond in laser brazing with Ni–Cr filler alloy

Mingjun Zhang, Kangwei Li, Yubin Huang, Yongle Hu, Cong Mao, Jian Zhang, Yonggang Tong, Zhuming Bi

Ceramics International· Volume 48· Issue 3
Publisher page

Abstract

Abstract An attempt to increase the strengths of bonding between diamond and filler metal in producing high-precision machining tools was made in this paper by proposing new ultrasonic-assisted laser brazing (UALB) technique in which the UALB process was performed using a fiber laser and Ni–Cr filler alloy, followed by the paraxial feeding of diamond powder. In addition, to examine the impact of an ultrasonic vibration on the mechanical properties of diamond at its bonding interface, the brazing process was carried out with and without suppression in ultrasonic vibration, and the microstructure and mechanical properties of diamond at the bonding interface were observed, measured and compared. The results showed that the ultrasonic assistance had improved the strengths of the bonding of diamond with the filler alloy by reducing surface cracks, increasing the wettability of molten filler, and forming and crystalizing directional carbides of Cr3C2 and Cr7C3 with a higher density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Diamond-metal interfaces in cutting tools: a review10.1007/s10853-011-6164-6 ↗
2. A comparison on core drilling of silicon carbide and alumina engineering ceramics with mono-layer brazed diamond tool using surfactant as coolant10.1016/j.ceramint.2015.03.117 ↗
3. Tribological behavior of cBN-WC-10Co composites for dry reciprocating sliding wear10.1016/j.ceramint.2018.12.132 ↗
4. On performance of brazed bonded monolayer diamond grinding wheel10.1016/S0007-8506(07)62003-4 ↗
5. Evolution of nano-cracks in single-crystal silicon in ultraprecision mechanical polishing10.1016/j.jmapro.2020.08.005 ↗
6. Effects of Ce and La elements on interfacial bonding, thermal damage and mechanical performance of brazed diamonds with Ni-Cr filler alloy10.1016/j.ijrmhm.2021.105571 ↗
7. Interfacial characteristics and thermal damage of brazed W-coated diamond with Ni- based filler alloy10.1016/j.diamond.2021.108401 ↗
8. Interfacial characteristics of titanium coated micro-powder diamond abrasive tools fabricated by electroforming-brazing composite process10.1016/j.ijrmhm.2019.104973 ↗
9. Study on diamond vacuum brazed with Cu-based filler metal containing Cr10.1007/s00170-016-9802-y ↗
10. Characteristics of brazing Al2O3/diamond/c-BN/SiC grains using Cu-Sn-Ti active filler powder alloys10.1016/j.surfcoat.2015.12.055 ↗
11. Interface characteristics and performance of pre-brazed diamond grains with Ni–Cr composite alloy
12. The brazing of diamond10.1016/j.ijrmhm.2008.11.011 ↗
13. Fabrication and performance of brazing diamond using large size Ni-Cr alloy as a bonding agent10.1016/j.diamond.2021.108352 ↗
14. Characteristics and removal mechanism in laser cutting of cBN-WC-10Co composites10.1016/j.jmatprotec.2015.11.014 ↗
15. Laser cladding of diamond tools: interfacial reactions of diamond and molten metal10.1016/j.surfcoat.2016.02.014 ↗
16. Laser sintering of abrasive layers with inclusions of cubic boron nitride grains10.1007/s40516-018-0068-0 ↗
17. Laser brazing of diamond grits using a Cu-15Ti-10Sn brazing alloy10.2320/matertrans.43.2604 ↗
18. Study on CO2 laser sintering for the mixture of metallic powder and diamond grits
19. Interface microstructure and formation mechanism of diamond abrasives laser brazed with Ni-Cr solder10.1016/S1875-5372(16)30111-4 ↗
20. 3D printing of diamond tools for dental ceramics processing10.1002/adem.201700747 ↗
21. Diamond-metal matrix interaction in tools fabricated by conventional and current induced sintering
22. Study of the technology of pulsed laser brazing of diamond, Superhard
23. Phase-field modeling of selective laser brazing of diamond grits
24. Laser power effects on properties of laser brazing diamond coating10.1080/02670844.2020.1758292 ↗
25. Influence of laser scanning speed on the formation property of laser brazing diamond coating10.1016/j.diamond.2020.108085 ↗
26. Macrosonics in industry: ultrasonic soldering10.1016/0041-624X(77)90069-5 ↗
27. Applying of ultrasonic waves on brazing of alumina to copper using Zn-Al filler alloy10.1023/A:1025161120349 ↗
28. Micro-manipulation of small particles by node position control of an ultrasonic standing wave10.1016/S0041-624X(02)00114-2 ↗
29. Design of a defined grain distribution brazed diamond grinding wheel for ultrasonic assisted grinding and experimental verification10.1016/j.ultras.2021.106577 ↗
30. Mechanism of cavitation erosion in ultrasonic soldering of aluminum
31. Interfacial microstructure and mechanical properties of ultrasonic-assisted brazing joints between Ti-6Al-4V and ZrO210.1016/j.ceramint.2019.11.276 ↗
32. Interaction behaviors at the interface between liquid Al–Si and solid Ti–6Al–4V in ultrasonic-assisted brazing in air10.1016/j.ultsonch.2012.06.011 ↗
33. Fundamental aspect of ultrasonic assisted induction brazing of diamond onto 1045 steel10.1016/j.jmatprotec.2018.05.021 ↗
34. Optimum and arrangement technology of abrasive topography for brazed diamond grinding disc10.1016/j.ijrmhm.2020.105455 ↗
35. Observations of cavitation erosion pit formation10.1016/j.ultsonch.2013.01.011 ↗
36. Filler metals, brazing processing and reliability for diamond tools brazing: a review[J]10.1016/j.jmapro.2021.04.015 ↗
37. Effect of ultrasound and stabilizers on nucleation kinetics of curcumin during liquid antisolvent precipitation10.1016/j.ultsonch.2014.11.016 ↗
38. Effect of Cu-P-Sn on brazing diamond with Ni-based filler alloy10.1007/s00170-016-9400-z ↗
39. Interfacial bonding mechanism and adhesive transfer of brazed diamond with Ni-based filler alloy, First-principles and experimental perspective10.1016/j.carbon.2019.07.015 ↗
40. Evolution of interface carbide diamond brazed with filler alloy containing Cr10.1016/j.diamond.2018.10.009 ↗
41. On the topology and size advantage of potentially abnormal grains10.1016/j.commatsci.2018.07.012 ↗
42. The effects of solder alloys on the morphologies and mechanical properties of brazed diamond grits10.1016/j.ijrmhm.2013.10.003 ↗
43. Microstructure and performance of brazed diamonds with multilayer graphene-modified Cu–Sn–Ti solder alloys10.1016/j.ceramint.2021.04.304 ↗
44. Adsorption and diffusion behaviors of Ni-based filler elements on diamond surface10.1016/j.jallcom.2020.153652 ↗
45. The electronic, mechanical properties and theoretical hardness of chromium carbides by First-principles calculations10.1016/j.jallcom.2011.02.009 ↗
46. Effect of grain wear on material removal behavior during grinding of Ti-6Al-4V titanium alloy with single aggregated CBN grain10.1016/j.ceramint.2019.04.215 ↗