Simulation and experimental study on group hole laser ablation on AL2O3 ceramics
Source abstract
Abstract
Abstract Thermal effect is inevitable during laser processing and is easy to induce cracks and damage on the hard and brittle materials, especially. The crack generation mechanism during laser ablation of single hole and groups of holes on alumina ceramic has been investigated. A heat conduction model of the nanosecond laser processing of a group of holes has been developed. The temperature field over a AL2O3 sample was modeled and simulated using COMSOL multi-physics. The temperature distribution on the AL2O3 sample was experimentally verified using an infrared thermometer. The present research provides guidance for the high-quality laser machining of group holes over large areas.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Advanced Surface Polishing Techniques · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. An investigation on micro-via drilling on ceramic substrates by a picosecond laser
2. Laser drilling of structural Ceramics—A review
3. Laser drilling of silicon nitride and alumina ceramics: a numerical and experimental study10.1063/1.1334367 ↗
4. Parametric effects on femtosecond laser ablation of Al2O3 ceramics10.1016/j.ceramint.2012.10.090 ↗
5. Rapid micro hole laser drilling in ceramic substrates using single mode fiber laser - ScienceDirect10.1016/j.jmatprotec.2015.02.014 ↗
6. Effect of high repetition rate on dimension and morphology of micro-hole drilled in metals by picosecond ultra-short pulse laser
7. Novel metal-organic super-hydrophobic surface fabricated by nanosecond laser irradiation in solution10.1016/j.colsurfa.2019.124343 ↗
8. A contrastive investigation on anticorrosive performance of laser-induced super-hydrophobic and oil-infused slippery coatings
9. A novel anti-spatter and anti-crack laser drilling technique: application to ceramics10.1007/s00339-002-2018-z ↗
10. An experimental and numerical study on laser percussion drilling of thick-section alumina - ScienceDirect10.1016/j.jmatprotec.2012.01.010 ↗
11. A theoretical analysis and experimental verification of a laser drilling process for a ceramic substrate
12. Zhang · 2001
13. Experimental and theoretical investigation of the drilling of alumina ceramic using Nd:YAG pulsed laser10.1016/j.optlastec.2011.11.010 ↗
14. Characterization of the drilling alumina ceramic using Nd:YAG pulsed laser10.1016/j.jmatprotec.2008.04.049 ↗
15. Sun · 2007
16. Characterization of hole circularity and heat affected zone in pulsed CO2 laser drilling of alumina ceramics10.1016/j.optlastec.2013.04.010 ↗
17. Xie · 2011
18. UV laser microprocessing and post chemical etching on ultrathin Al2O3 ceramic substrate10.1016/j.jeurceramsoc.2011.03.034 ↗
19. Ablation characteristics of aluminum oxide and nitride ceramics during femtosecond laser micromachining10.1016/j.apsusc.2009.04.058 ↗
20. Characterization of ultrafast microstructuring of alumina (Al2O3)
21. Femtosecond laser micro-structuring of alumina ceramic10.1016/j.apsusc.2005.03.005 ↗
22. A review on cutting of industrial ceramic materials10.1016/j.precisioneng.2019.05.009 ↗
23. Engineered net shaping of alumina ceramics using picosecond laser10.1016/j.optlastec.2020.106669 ↗
24. Deep and high precision cutting of alumina ceramics by picosecond laser10.1016/j.ceramint.2020.03.069 ↗
25. Controlled separation of brittle materials using a laser
26. Laser cutting of thick ceramic substrates by controlled fracture technique10.1016/S0924-0136(03)00134-1 ↗
27. Experimental investigations of machining characteristics of laser-induced thermal cracking in alumina ceramic wet grinding10.1007/s00170-014-5719-5 ↗
28. Generation and propagation behavior of laser induced thermal cracks10.2109/jcersj.101.522 ↗
29. Thermal stress cleaving of brittle materials by laser beam10.1016/S0007-8506(07)61487-5 ↗
30. Laser beam induced thermal-crack propagation for asymmetric linear cutting of silicon wafer10.1016/j.optlastec.2019.105765 ↗
31. Experimental study on laser processing of constructural ceramics
32. Yan · 2013
33. The role of recoil pressure in energy balance during laser materials processing10.1088/0022-3727/30/18/008 ↗
34. Theoretical analysis of material removal mechanisms in pulsed laser fusion cutting of ceramics10.1088/0022-3727/38/4/021 ↗
35. A review of laser hole fabrication on electronic ceramic substrate surface
36. Study on the advantages of ultraviolet laser in microfabrication technology
37. Experimental study on water-assisted laser etching of alumina ceramics
38. Ablation mechanism of alumina under ultra-short pulse laser irradiation
39. Characterisation of Ultrafast Micro-structuring of Alumina (Al 2O3)
40. Femtosecond laser microfabrication
41. Femtosecond laser drilling of alumina ceramic substrates10.1007/s00339-010-5816-8 ↗
42. Analysis of surface and material modifications caused by laser drilling of AlN ceramics10.1016/j.apsusc.2007.07.151 ↗
43. Improving quality and machining efficiency of hole during AlN trepanning with nanosecond pulse laser
44. Femtosecond laser drilling of alumina wafers10.1007/s11664-009-0811-6 ↗
45. Precision microfabrication of AlN and Al2O3 ceramics by femtosecond laser ablation
46. Distribution of thermal stress generated by laser irradiation on cylinder
47. Fracture toughness and thermal shock resistance of alumina ceramics
48. Gong · 2001
49. Zhang · 2007
50. Tian · 2011
51. Progress in thermal shock resistance of alumina based ceramics
52. Wang · 2017