The synthesis of NaSICON-type ZrNb(PO4)3 structure by the use of Pechini method
Source abstract
Abstract
Sol–gel routes for synthesizing super ionic conducting solids (e.g. NaSICON) are more economically advantageous and results in higher homogeneity and purity as well as finer grain size of the final product compared to other techniques. One prerequisite towards arriving at an effective sol–gel process is to cope with the obstacles at each step of solution and gel preparations, and heat treatment process. In the present work we attempt to develop a procedure for synthesis NaSICON-type ZrNb(PO4)3 based on the Pechini method, which offers easier process and better quality of the final product. Fourier Transform Infrared Spectroscopy (FTIR) was employed to evaluate the bonding characteristics of the obtained gel. The effect of heat treatment procedure on the purity and crystallographic structure of the final product was studied by the use of X-ray diffraction. Thermogravimetric Analysis (TGA) together with Differential Thermal Analysis (DTA) was used to investigate the variations of dried gel properties with temperature and to identify the appropriate heating process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Nuclear materials and radiation effects · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Crystalline solid electrolytes I: general considerations and the major materials
2. Ionic conductivity of lithium orthosilicate–lithium phosphate solid solutions10.1149/1.2133537 ↗
3. Synthesis and sintering of Ca0.5Zr2P3O12 –a low thermal expansion material10.1016/0025-5408(85)90035-2 ↗
4. Crystal structures and crystal chemistry in the system Na1+xZr2SixP3−xO1210.1016/0025-5408(76)90073-8 ↗
5. Tetravalent Zr4+ or Hf4+ ion conduction in NASICON type solids10.1016/S0167-2738(02)00528-3 ↗
6. Tetravalent Zr4+ ion conduction in NASICON-type phosphate solids10.1007/s10008-002-0320-5 ↗
7. Extraordinarily high Zr4+ ion conducting solid10.1021/ja070293x ↗
8. Highly Zr4+ ion-conducting solid electrolytes10.1149/1.3072775 ↗
9. Invited review sol–gel preparation of high temperature superconducting oxides10.1007/BF00402588 ↗
10. Synthesis of Y+3doped BaZrO3 nanopowders via a Pechini method with different molar ratios citric acid
11. Preparation of Zr(IV)/Nb(V) Nasicon-like phosphates by a sol–gel method10.1007/BF00486283 ↗
12. Preparation, structure and ferroelectric properties of Ba(Fe0.5Nb0.5)O3 powders by sol–gel method10.1016/j.jcrysgro.2005.06.025 ↗
13. Chemical synthesis of lithium niobate powders (LiNbO3) prepared from water-soluble DL-malic acid complexes10.1021/cm000900e ↗
14. Preparation and characterization of yttria stabilized zirconia minispheres by the sol–gel drop generation method
15. Preparation of the high temperature proton conductor Ba3Ca1.18Nb1.82O8.73 via a wet chemical route10.1016/S0167-2738(97)00062-3 ↗
16. Effect of different ethylene glycol precursors on the Pechini process for the synthesis of nano-crystalline LiNi0.5Co0.5VO4 powders10.1016/j.matchemphys.2004.10.046 ↗
17. Novel urea assisted polymeric citrate route for the synthesis of nanocrystalline spinel LiMn2O4 powders10.1016/j.jallcom.2006.09.098 ↗
18. Influence of molar ratio of citric acid to metal ions on preparation of La0.67Sr0.33MnO3 materials via polymerizable complex process10.1016/j.jeurceramsoc.2004.09.028 ↗
19. Ethanothermal reduction to MoO2 microspheres via modified Pechini method10.1016/j.jcrysgro.2006.05.007 ↗
20. Synthesis and characterization of nanostructured niobium and molybdenum nitrides by a two-step transition metal halide approach10.1111/j.1551-2916.2011.04412.x ↗
21. The effect of preparation: Pechini and Schiff base methods, on adsorbed oxygen of LaCoO3 perovskite oxidation catalysts10.1016/j.colsurfa.2007.08.002 ↗
22. Vibrational spectra and H-bondings in anhydrous and monohydrate a-Zr phosphates10.1016/j.jssc.2007.01.016 ↗
23. Electrochromism of sol–gel derived niobium oxide films10.1016/S0927-0248(98)00062-2 ↗
24. Reflux synthesis and hydrothermal processing of ZrO2 nanopowders at low temperature10.1016/j.matchemphys.2009.06.024 ↗
25. Preparation and characterization of single-phase α-Fe2O3 nano-powders by Pechini sol–gel method10.1016/j.matlet.2011.04.004 ↗
26. Synthesis of La1−xSrxMnO3 powders by polymerizable complex method: evaluation of structural, morphological and electrical properties10.1016/j.ceramint.2011.03.069 ↗
27. Chelating agent effects in the synthesis of mesoscopic-size superconducting particles10.1007/s10971-007-1673-0 ↗
28. The effects of heat-treatment on the structure evolution and crystallinity of ZnTiO3 nano-crystals prepared by Pechini process10.1016/j.materresbull.2007.06.002 ↗
29. Dimorphism, phase transitions, and transport properties in LiZr2(PO4)310.1016/0022-4596(89)90056-X ↗