Mn Co3O4 spinel coatings: Controlled synthesis and high temperature oxidation resistance behavior
Source abstract
Abstract
Abstract A controllable method for the synthesis of MnxCo3-xO4 (x = 0.4, 0.8, 1.0, 1.2) spinel coatings with unique microstructures and high-temperature oxidation resistances for solid oxide fuel cells is crucially desired. Herein, we report the synthesis and analysis of synthesized coatings with different phase compositions of ferritic stainless steel interconnects. The coatings are fabricated using a sol-gel dip-coating method. Multiple experimental results confirm that the MnxCo3-xO4 coatings exhibit the advantages of having fine grains and uniform density. Furthermore, the as-prepared Mn1.2Co1.8O4 coating has a low coefficient of thermal expansion (11.98 × 10-6 K-1), matching that of ferritic stainless steel, which effectively improves the anti-stripping property of the materials. In particular, oxidation tests illustrate that the oxidation weight gain of this coating decreased by 84.4% compared with bare ferritic stainless steel after 3600 h. The area-specific resistance (ASR) results indicate that the ASR value of the Mn1.2Co1.8O4-coated sample reduced by about 70% compared with those of the ferritic stainless steel samples, which demonstrates its desirable high-temperature oxidation resistance property. It is hoped that this work stimulates new research ideas for the development of spinel oxide coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Suppression of Cr evaporation by Co electroplating and underlying Cr retention mechanisms for the 22 wt.% Cr containing ferritic stainless steel10.1016/j.corsci.2017.10.019 ↗
2. CuMn1.8O4 protective coatings on metallic interconnects for prevention of Cr-poisoning in solid oxide fuel cells10.1016/j.jpowsour.2017.12.031 ↗
3. Recent development of SOFC metallic interconnect10.1016/S1005-0302(10)60049-7 ↗
4. The kinetics and mechanism of solid-state spinel formation—areview and critique10.1007/BF00603514 ↗
5. Effectively suppressing dissolution of manganese from spinel lithium manganate via a nanoscale surface-doping approach10.1038/ncomms6693 ↗
6. Turning down the heat: design and mechanism in solid-state synthesis10.1126/science.259.5101.1558 ↗
7. Self-healing thermal barrier coating systems fabricated by spark plasma sintering10.1016/j.matdes.2018.02.001 ↗
8. Atmospheric plasma spraying low temperature cathode materials for solid oxide fuel cells10.1007/s11666-009-9441-z ↗
9. Physical vapor deposition tool coatings10.1016/0257-8972(95)02616-9 ↗
10. High temperature oxidation be-havior of SUS430 SOFC interconnects with Mn-Co spinel coating in air10.1016/j.jallcom.2019.01.015 ↗
11. Low temperature processed MnCo2O4 and MnCo1.8Fe0.2O4 as effective protective coatings for solid ox-ide fuel cell interconnects at 750°C10.1016/j.jpowsour.2016.11.011 ↗
12. Efficient dual layer interconnect coating for high temperature electrochemical devices10.1016/j.ijhydene.2012.07.038 ↗
13. Double-shelled CoMn2O4 hollow microcubesas high-capacity anodes for lithium-ion batteries10.1002/adma.201104407 ↗
14. Optical and mechanical characterization of novel cobalt-based metal oxide thin films synthesized using sol–gel dip-coating method10.1016/j.surfcoat.2012.07.028 ↗
15. Phase and composition controllable synthesis of cobalt manganese spinel nanoparticles towards efficient oxygen electrocatalysis10.1038/ncomms8345 ↗
16. Low temperature synthesis of Co3O4 and (Co1−xMnx)3O4 spinels nanoparticles10.1016/j.apt.2017.02.022 ↗
17. (Mn,Co)3O4 Spinel coatings on ferritic stainless steels for SOFC interconnect applications10.1016/j.ijhydene.2006.08.048 ↗
18. Pre-treatment and oxidation behavior of sol-gel Co coating on 430 steel in 750°C air with thermal cycling10.1016/j.surfcoat.2012.02.023 ↗
19. Flux crystal growth and thermal stabilities of LiV2O410.1038/nmat1499 ↗
20. Well-dispersed Co3O4/Co2MnO4 nanocomposites as a synergistic bifunctional catalyst for oxygen reduction and oxygen evolution reactions10.1039/c3nr00444a ↗
21. Covalent hybrid of spinel manganese–cobalt oxide and graphene as advanced oxygen reduction electrocatalysts10.1021/ja210924t ↗
22. Structural and thermal properties of the tetragonal cobalt manganese spinels MnxCo3-xO4(1.4<x<2.0)10.1021/cm950503h ↗
23. First-principles electronic structure calculations for the whole spinel oxide solid solution range MnxCo3-xO4 (0≤x≤3) and their comparison with experimental data10.1039/C6CP05554K ↗
24. Formation of spinelreaction layers in manganese cobaltite-coated Crofer22 APU for solid oxide fuelcell interconnects10.1016/j.jpowsour.2012.07.091 ↗
25. Long-term oxidation behavior of spinel-coated ferritic stainless steel for solid oxide fuel cell interconnect applications10.1016/j.jpowsour.2013.01.033 ↗
26. Sol-gel preparation of cobalt manganese mixed oxides for their use as electrode materials in lithium cells10.1016/j.electacta.2007.06.066 ↗
27. Cyclic oxidation of Mn–Co spinel coated SUS 430 alloy in the cathodic atmosphere of solid oxide fuel cells10.1016/j.jpowsour.2008.06.055 ↗
28. Coated stainless steel 441 as interconnect material for solid oxide fuel cells: oxidation performance and chromium evaporation10.1016/j.jpowsour.2013.08.089 ↗
29. Long term study of Cr evaporation and high temperature corrosion behaviour of Co coated ferritic steel for solid oxide fuel cell interconnects10.1016/j.jpowsour.2012.06.092 ↗
30. Tuning precursor reactivity toward nanometer-size control in palladium nanoparticles studied by in situ small angle X-ray scattering10.1021/acs.chemmater.7b05186 ↗
31. Investigation on physiochemical properties of Mn substituted spinel cobalt oxide for supercapacitor applications10.1016/j.electacta.2014.01.161 ↗
32. Electronic structure and optical properties of inverse-spinel MnCo2O4 thin films10.3938/jkps.60.1376 ↗
33. Effects of grain size and thermodynamic energy on the lattice parameters of metallic nanomaterial10.1016/j.matdes.2015.06.019 ↗
34. Investigations of Mn-Co-O and Mn-Co-Y-O coatings deposited by the magnetron sputtering on ferritic stainless steels10.1016/j.surfcoat.2011.08.036 ↗
35. Modeling of the melting point, Debye temperature, thermal expansion coefficient, and the specific heat of nanostructured materials10.1021/jp902097f ↗
36. Studies on elements diffusion of Mn/Co coated ferritic stainless steel for solid oxide fuel cell interconnects application10.1016/j.ijhydene.2013.02.026 ↗
37. Cations in octahedral sites: a descriptor for oxygen electrocatalysis on transition-metal spinels10.1002/adma.201606800 ↗
38. Theory of ordered mixture phases iii appearances of irregularity in polar compounds as a basis for ion conduction and electron conduction10.1515/zpch-1933-2213 ↗
39. Microstructural and electrical characterization of Mn-Co spinel protective coatings for solid oxide cell interconnects10.1016/j.jeurceramsoc.2017.07.011 ↗
40. Critical evaluation and thermodynamic modeling of the Mn–Cr–O system for the oxidation of SOFC interconnect10.1016/j.ssi.2006.01.012 ↗
41. Phase studies in the chromium-manganese-titanium oxide system at different oxygen partial pressures10.1016/0955-2219(91)90054-4 ↗
42. Oxidation and electrical behavior of a ferritic stainless steel with a Mn-Co-based coating for SOFC interconnect applications10.1007/s11085-015-9557-0 ↗