A novel fabrication procedure for producing high strength hydroxyapatite ceramic scaffolds with high porosity
Source abstract
Abstract
Abstract Hydroxyapatite (HA) scaffolds were fabricated using the space holder method with a pressureless sintering process in a systematically developed manner at different fabrication stages to increase the strength of the scaffold at high porosity. Polyvinyl alcohol (PVA) and Polymethyl methacrylate (PMMA) were used as binders and space holder agents, respectively. The physical properties of the HA scaffolds were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), linear shrinkage test, and porosity measurements. The mechanical properties of the HA scaffolds were analyzed using compressive strength measurements. The results revealed that the HA scaffold met the expected quality requirements with a compressive strength of 2.2 MPa at a porosity of 65.6% with pore sizes distributed in the range of 126–385 μm. The shrinkage of the scaffold diameter occurred by 20.27%, this diameter shrinkage predominantly to the shrinkage of the HA scaffold caused by sintering. Besides, suspect that a higher PMMA concentration causes pore size shrinkage upon sintering. The formation of pore interconnections was evidenced by SEM observations and the ‘translucent light method’ developed in this study. The results of the scaffold phase test using XRD showed that the final scaffold consisted only of the HA phase, as the PVA and PMMA phases burned out during the sintering process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. 3D hydroxyapatite scaffold for bone regeneration and local drug delivery applications10.1016/j.jddst.2019.101131 ↗
2. 3D-printed bioceramic scaffolds: from bone tissue engineering to tumor therapy10.1016/j.actbio.2018.08.026 ↗
3. Micro-finite element model to investigate the mechanical stimuli in scaffolds fabricated via space holder technique for cancellous
4. Preparing diopside nanoparticle scaffolds via space holder method: simulation of the compressive strength and porosity10.1016/j.jmbbm.2017.05.004 ↗
5. Analytical and experimental analyses for mechanical and biological characteristics of novel nanoclay bio-nanocomposite scaffolds fabricated via space holder technique10.1016/j.clay.2018.08.013 ↗
6. Mechanical and cytotoxicity evaluation of nanostructured hydroxyapatite-bredigite scaffolds for bone regeneration10.1016/j.msec.2016.06.030 ↗
7. Reinforcing 13–93 bioglass scaffolds fabricated by robocasting and pressureless spark plasma sintering with graphene oxide10.1016/j.jmbbm.2019.05.016 ↗
8. A porous polymeric–hydroxyapatite scaffold used for femur fractures treatment: fabrication, analysis, and simulation10.1007/s00590-019-02530-3 ↗
9. Bioceramic scaffolds fabrication: indirect 3D printing combined with ice-templating vs. robocasting10.1016/j.jeurceramsoc.2018.12.006 ↗
10. Porous hydroxyapatite bioceramics produced by impregnation of 3D-printed wax mold: slurry feature optimization10.1016/j.jeurceramsoc.2016.06.005 ↗
11. Synthesis and incorporation of rod-like nano-hydroxyapatite into type I collagen matrix: a hybrid formulation for 3D printing of bone scaffolds10.1016/j.jeurceramsoc.2020.02.018 ↗
12. Effect of different dopants on porous calcium silicate composite bone scaffolds by 3D gel-printing10.1016/j.ceramint.2019.08.266 ↗
13. 3D printing of bone scaffolds with hybrid biomaterials10.1016/j.compositesb.2018.09.065 ↗
14. New insights in the morphological characterization and modelling of poly(ε-caprolactone) bone scaffolds obtained by supercritical CO2 foaming10.1016/j.supflu.2020.105012 ↗
15. Development of nanocomposite scaffolds based on TiO2 doped in grafted chitosan/hydroxyapatite by freeze drying method and evaluation of biocompatibility10.1016/j.ijbiomac.2017.03.067 ↗
16. Porous poly-L-lactic acid scaffold reinforced by chitin fibers10.1007/s00289-005-0364-7 ↗
17. Synthesis and characterization of porous β-tricalcium phosphate blocks10.1016/j.biomaterials.2005.03.026 ↗
18. Investigation of physico-mechanical behavior, permeability and wall shear stress of porous HA/PMMA composite bone scaffold10.1007/s13369-020-04467-w ↗
19. Design and fabrication of 3D printed scaffolds with a mechanical strength comparable to cortical bone to repair large bone defects10.1038/srep19468 ↗
20. Hierarchical porous Mg2SiO4-CoFe2O4 nanomagnetic scaffold for bone cancer therapy and regeneration: surface modification and in vitro studies10.1016/j.msec.2019.110579 ↗
21. Custom repair of mandibular bone defects with 3D printed bioceramic scaffolds10.1177/0022034517734846 ↗
22. Characterizations and interfacial reinforcement mechanisms of multicomponent biopolymer based scaffold10.1016/j.msec.2019.03.030 ↗
23. Progress in the advancement of porous biopolymer scaffold: tissue engineering application10.1021/acs.iecr.8b05334 ↗
24. Selection of the implant and coating materials for optimized performance by means of nanoindentation10.1016/j.actbio.2010.09.023 ↗
25. Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction10.1016/j.matdes.2017.07.059 ↗
26. Cellular compatibility of nanocomposite scaffolds based on hydroxyapatite entrapped in cellulose network for bone repair10.1016/j.msec.2017.02.040 ↗
27. Biocompatible nanocomposite scaffolds based on copolymer-grafted chitosan for bone tissue engineering with drug delivery capability10.1016/j.msec.2017.02.112 ↗
28. Composite biomaterial scaffolds for cardiac tissue engineering10.1179/1743280415Y.0000000012 ↗
29. Assessment of osteogenesis for 3D-printed polycaprolactone/hydroxyapatite composite scaffold with enhanced exposure of hydroxyapatite using rat calvarial defect model10.1016/j.compscitech.2019.107844 ↗
30. Fabrication and properties of zirconia/hydroxyapatite composite scaffold based on digital light processing10.1016/j.ceramint.2019.09.219 ↗
31. Therapeutic effect of magnetic nanoparticles on calcium silicate bioceramic in alternating field for biomedical application10.1016/j.ceramint.2020.07.215 ↗
32. Introducing natural hydroxyapatite-diopside (NHA-Di) nano-bioceramic coating10.1016/j.ceramint.2015.06.065 ↗
33. Magnetic hydroxyapatite: a promising multifunctional platform for nanomedicine application10.2147/IJN.S147355 ↗
34. Bioactivity of bioceramic materials used in the dentin-pulp complex therapy: a systematic review10.3390/ma12071015 ↗
35. Si substituted hydroxyapatite nanorods on Ti for percutaneous implants10.1016/j.bioactmat.2020.01.001 ↗
36. Rapid production of bioactive hydroxyapatite fibers via electroblowing10.1016/j.jeurceramsoc.2016.05.011 ↗
37. Natural origin hydroxyapatite scaffold as potential bone tissue engineering substitute10.1016/j.ceramint.2016.08.165 ↗
38. Synthesis, characterization, in vitro biocompatibility and antibacterial properties study of nanocomposite materials based on hydroxyapatite-biphasic ZnO micro- and nanoparticles embedded in Alginate matrix10.1016/j.msec.2019.109965 ↗
39. Micromechanical properties of single crystal hydroxyapatite by nanoindentation10.1016/j.actbio.2009.02.009 ↗
40. Hydroxyapatite-modified micro/nanostructured titania surfaces with different crystalline phases for osteoblast regulation10.1016/j.bioactmat.2020.10.006 ↗
41. Hydroxyapatite coating on titanium alloy TNTZ for increasing osseointegration and reducing inflammatory response in vivo on Rattus norvegicus Wistar rats10.1016/j.ceramint.2021.02.184 ↗
42. Shi · 2018
43. In vitro evaluation for apatite-forming ability of cellulose-based nanocomposite scaffolds for bone tissue engineering10.1016/j.ijbiomac.2016.01.102 ↗
44. Biocompatibility, physico-chemical and mechanical properties of hydroxyapatite-based silicon dioxide nanocomposites for biomedical applications10.1016/j.ceramint.2020.06.132 ↗
45. Biodegradable and biocompatible systems based on hydroxyapatite nanoparticles10.3390/app7010060 ↗
46. Green synthesis of biocompatible nanostructured hydroxyapatite from Cirrhinus mrigala fish scale – a biowaste to biomaterial10.1016/j.ceramint.2019.01.086 ↗
47. Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings10.1016/j.msec.2016.11.129 ↗
48. Mechanical properties and biocompatibility of the sputtered Ti doped hydroxyapatite10.1016/j.jmbbm.2016.06.025 ↗
49. Microstructure and material properties of porous hydroxyapatite-zirconia nanocomposites using polymethyl methacrylate powders10.1016/j.matdes.2014.11.028 ↗
50. Layered manufacturing of a three-dimensional polymethyl methacrylate (PMMA) scaffold used for bone regeneration10.1080/10667857.2018.1541212 ↗
51. Spark plasma sintering of macroporous calcium phosphate scaffolds from nanocrystalline powders10.1016/j.jeurceramsoc.2007.07.012 ↗
52. Enhancing the physical and mechanical properties of pellet-shaped hydroxyapatite by controlling micron- and nano-sized powder ratios10.1016/j.ceramint.2020.03.136 ↗
53. Molecular dynamics simulation and experimental study of the bonding properties of polymer binders in 3D powder printed hydroxyapatite bioceramic bone scaffolds10.1016/j.ceramint.2017.07.082 ↗
54. The Effects of sintering temperature on the properties of hydroxyapatite10.1016/S0272-8842(99)00046-2 ↗
55. Physicochemical and biological properties of bovine-derived porous hydroxyapatite/collagen composite and its hydroxyapatite powders10.1016/j.ceramint.2017.09.075 ↗
56. Study of the suitability of a commercial hydroxyapatite powder to obtain sintered compacts for medical applications10.1088/1742-6596/850/1/012021 ↗
57. Influence of the nano hydroxyapatite powder on thermally sprayed HA coatings onto stainless steel10.1016/j.surfcoat.2016.05.069 ↗
58. Mechanical integrity of biodegradable Mg–HA composite during in vitro exposure10.1007/s11665-018-3778-8 ↗
59. Synthesis of nano-hydroxyapatite (nHA) from waste mussel shells using a rapid microwave method10.1016/j.matchemphys.2014.11.016 ↗
60. Hydroxyapatite synthesis and the benefits of its blend with calcium aluminate cement10.1016/j.ceramint.2015.10.056 ↗
61. A silica/PVA adhesive hybrid material with high transparency, thermostability and mechanical strength10.1039/C6RA25579E ↗
62. Microstructure and material properties of porous hydroxyapatite-zirconia nanocomposites using polymethyl methacrylate powders10.1016/j.matdes.2014.11.028 ↗
63. Crystallization behavior of low-cost biphasic hydroxyapatite/β-tricalcium phosphate ceramic at high sintering temperatures derived from high potential calcium waste sources10.1016/j.rinp.2018.12.025 ↗
64. Evolution of the microstructural and mechanical properties of hydroxyapatite bioceramics with varying sintering temperature10.1016/j.ceramint.2019.05.144 ↗
65. The usability of ark clam shell (Anadara granosa) as calcium precursor to produce hydroxyapatite nanoparticle via wet chemical precipitate method in various sintering temperature10.1186/s40064-016-2824-y ↗
66. 3D gel-printing of hydroxyapatite scaffold for bone tissue engineering10.1016/j.ceramint.2018.09.300 ↗
67. Highly loaded hydroxyapatite microsphere/PLA porous scaffolds obtained by fused deposition modelling10.1016/j.ceramint.2018.07.297 ↗
68. Pore morphology effects on the fibrovascular tissue growth in porous polymer substrates10.1177/096368979400300411 ↗
69. Effect of hydroxyapatite fillers on the mechanical properties and osteogenesis capacity of bio-based polyurethane composite scaffolds10.1016/j.jmbbm.2018.08.028 ↗
70. Development of composite scaffolds for load-bearing segmental bone defects10.1155/2013/458253 ↗
71. Development of bone scaffold using Puntius conchonius fish scale derived hydroxyapatite: physico-mechanical and bioactivity evaluations10.1016/j.ceramint.2019.02.044 ↗
72. Dependence of mechanical compressive strength on local variations in microarchitecture in cancellous bone of proximal human femur10.1016/j.jbiomech.2007.08.003 ↗
73. Compressive mechanical properties of human cancellous bone after gamma irradiation
74. Mechanical properties of human cancellous bone in the femoral head10.1007/BF02477797 ↗