journal article·2017-12

Effects of nano-alumina content on the formation of interconnected pores in porous purging plug materials

Qingheng Wang, Yuanbing Li, Shujing Li, Nana Xu, Ruofei Xiang, Ou Yang, Yuee Ni

Ceramics International· Volume 43· Issue 18
Publisher page

Abstract

Abstract The physical properties and microstructure of porous purging plug materials added with different nano-alumina contents and firing temperatures were investigated by means of X-ray diffraction, scanning electron microscopy, air permeability, pore size distribution, mean pore size, apparent porosity, bulk density, and cold crushing strength (CCS) tests. The results showed that the addition of nano-alumina had a great effect on the physical properties and microstructure of the porous purging plug materials. With increasing nano-alumina content in the composition, the main phase was α-Al 2 O 3 in all compositions and the mean pore size, apparent porosity and air permeability all increased due to the increased number of pores and pore size of the specimens which facilitated the formation of interconnected pores. When the sintering temperature was changed from 1550 °C to 1650 °C, some of the smaller pores vanished due to solid phase sintering, which reduced the apparent porosity, and some open pores connected to form interconnected pores, which promoted increased air permeability. In addition, the strength and porosity were found to follow the relationship σ = σ 0 exp (- b P ). When the apparent porosity increased, the CCS decreased, and vice versa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Granular flow and fluidized beds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. T. Komura, A. Thuchinari, Characteristic of MgO Porous Plug, in: Proceedings of UNITECR’11, Kyoto, Japan, 2011.
2. Effects of critical particle size on properties and microstructure of porous purging materials10.1016/j.matlet.2017.03.129 ↗
3. Effects of particle size of Al(OH)3 on the properties of porous purging materials10.2109/jcersj2.16223 ↗
4. The effect of nano-titania addition on the properties of high-alumina low-cement self-flowing refractory castables
5. The effect of nano-Cr2O3 on solid-solution assisted sintering of MgO refractories10.1016/j.ceramint.2012.04.077 ↗
6. Microstructure and phase evolution of alumina–spinel self-flowing refractory castables containing nano-alumina particles10.1016/j.ceramint.2010.11.013 ↗
7. Nano- and micrometre additions of SiO2, ZrO2 and TiO2 in fine grained alumina refractory ceramics for improved thermal shock performance10.1016/j.ceramint.2011.10.036 ↗
8. Influence of nano–Fe2O3 on sintering and mechanical property of magnesia–chrome refractories
9. Nano carbon containing MgO–C refractory: effect of graphite content10.1016/j.ceramint.2012.02.082 ↗
10. Improvement in performance of MgO–CaO refractories by addition of nano–sized ZrO210.1016/j.jeurceramsoc.2007.04.001 ↗
11. Behaviour of alumina–spinel self–flowing castables with nano–alumina particles addition
12. How effective is the addition of nanoscaled particles to alumina–magnesia refractory castables?10.1016/j.ceramint.2012.03.021 ↗
13. Effects of alumina nano–particulates addition on mechanical and electrical properties of barium titanate ceramics10.1016/j.cap.2007.04.008 ↗
14. Effect of nano irono xide as an additive on phase and microstructural evolution of mag-chrome refractory matrix10.1016/j.jeurceramsoc.2009.03.032 ↗
15. Improvement of mullite and magnesia–based refractory castables through addition of nano–spinel powder10.1111/j.1744-7402.2012.02762.x ↗
16. Influence of the addition of multiwall carbon nanotubes in the sintering of nanostructured yttria–stabilized tetragonal zirconia polycrystalline10.1111/j.1744-7402.2011.02649.x ↗
17. Effect of inorganic acid on the phase transformation of alumina10.1016/j.jallcom.2016.12.390 ↗
18. Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic10.1016/S0272-8842(96)00009-0 ↗
19. Effect of porosity on physical properties of sintered alumina10.1111/j.1151-2916.1956.tb15608.x ↗
20. Comparison of stress concentration versus minimum solid area based mechanical property-porosity relations10.1007/BF00367582 ↗
21. Dependence of mechanical strength of brittle polycrystalline specimens on porosity and grain size10.1111/j.1151-2916.1959.tb13596.x ↗