journal article·2020-04

LiTa2PO8 coated nickel-rich cathode material for improved electrochemical performance at high voltage

Zhongliang Xiao, Zhenzhen Chi, Liubin Song, Zhong Cao, Anxian Li

Ceramics International· Volume 46· Issue 6
Publisher page

Abstract

Abstract LiNi0.8Co0.1Mn0.1O2 (NCM) will have higher energy density at high voltage, but severe electrochemical polarization and capacity decay are likely to occur because of structural degradation. In this paper, LiTa2PO8 is used as a coating layer to modify the NCM. Covered with a 2–4 nm coating layer, the material structure does not change significantly, and the structure is more stable. More importantly, LiTa2PO8 has an ordered channel with three-dimensional Li+ ion transport, which plays a key role in improving Li+ transmission efficiency. The results show that the electrochemical properties of the material are significantly improved after coating at high voltage. After 100 cycles, the capacity retention increases from 71.58% to 84.85%, voltage stability also notably improved, the polarization is weaker, and the reversible charge and discharge capacity at high rate (3C) is significantly higher than that of raw materials. The change in morphology after 100 cycles proves that the LiTa2PO8 coating prevents direct contact between the cathode materials and the electrolyte, inhibits the side reaction and enhance the surface structure stability of the cathode materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Interdiffusion of cations from metal oxide surface coatings into LiCoO2 during sintering10.1021/acs.chemmater.7b01219 ↗
2. High performance LiFePO4/C cathode for lithium ion battery prepared under vacuum conditions10.1016/j.vacuum.2010.02.011 ↗
3. Structural, electrochemical and Li-ion transport properties of Zr-modified LiNi0.8Co0.1Mn0.1O2 positive electrode materials for Li-ion batteries10.1016/j.jpowsour.2018.10.094 ↗
4. AlF3-Coating to improve high voltage cycling performance of Li[Ni1/3Co1/3Mn1/3]O2 cathode materials for lithium secondary batteries10.1149/1.2422890 ↗
5. Depolarization effect to enhance the performance of lithium ions batteries10.1016/j.nanoen.2017.02.011 ↗
6. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries10.1038/ncomms4529 ↗
7. Countering the segregation of transition-metal ions in LiNi1/3Co1/3Mn1/3O2 cathode for ultralong life and high-energy Li-ion batteries10.1002/smll.201601923 ↗
8. Understanding transition-metal dissolution behavior in LiNi0.5Mn1.5O4 high-voltage spinel for lithium ion batteries10.1021/jp405158m ↗
9. Li-rich layered oxide cathodes for next-generation Li-ion batteries: chances and challenges10.1149/2.0111514jes ↗
10. A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries10.1016/j.ensm.2016.10.007 ↗
11. High voltage operation of Ni-rich NMC cathodes enabled by stable electrode/electrolyte interphases10.1002/aenm.201800297 ↗
12. Improvement of electrochemical and thermal properties of Li[Ni0.8Co0.1Mn0.1]O2 positive electrode materials by multiple metal (Al, Mg) substitution10.1016/j.electacta.2009.01.048 ↗
13. Improvement of electrochemical performances of Li[Ni0.8Co0.1Mn0.1]O2 cathode materials by fluorine substitution10.1149/1.2735916 ↗
14. Surface modification of Li rich Li1.2Mn0.54Ni0.13Co0.13O2 cathode particles10.1016/j.ceramint.2019.06.261 ↗
15. Role of LaNiO3 in suppressing voltage decay of layered lithium-rich cathode materials10.1016/j.electacta.2017.12.034 ↗
16. Surface modification of Li(Li0.17Ni0.2Co0.05Mn0.58)O2 with CeO2 as cathode material for Li-ion batteries10.1016/j.electacta.2014.04.181 ↗
17. Hydrothermal synthesis and electrochemical performance studies of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 for lithium-ion batteries10.1007/s11581-013-1041-8 ↗
18. 5 V class LiNi0.5Mn1.5O4 positive electrode coated with Li3PO4 thin film for all-solid-state batteries using sulfide solid electrolyte10.1016/j.ssi.2015.08.001 ↗
19. Improvement of long-term cycling performance of Li[Ni0.8Co0.15Al0.05]O2 by AlF3 coating10.1016/j.jpowsour.2013.01.045 ↗
20. Mechanistic study of lithium aluminum oxide atomic layer deposition10.1021/jp308828p ↗
21. Highly enhanced electrochemical performances of LiNi0.815Co0.15Al0.035O2 by coating via conductively LiTiO2 for lithium-ion batteries10.1016/j.ceramint.2019.06.055 ↗
22. Energy storage and thermostability of Li3VO4-coated LiNi0.8Co0.1Mn0.1O2 as cathode materials for lithium ion batteries10.3389/fchem.2018.00546 ↗
23. Thermoeletrochemical study on LiNi0.8Co0.1Mn0.1O2 with in situ modification of Li2ZrO310.1007/s11581-018-2481-y ↗
24. Effects of fast lithium-ion conductive coating layer on the nickel rich layered oxide cathode material10.1016/j.ceramint.2018.10.219 ↗
25. Solid electrolyte coated high voltage layered-layered lithium-rich composite cathode: Li1.2Mn0.525Ni0.175Co0.1O210.1039/c3ta10586e ↗
26. Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application10.1039/C3EE42704H ↗
27. LiTa2PO8: a fast lithium-ion conductor with new framework structure10.1039/C8TA09170F ↗
28. Origin of fast ion diffusion in super-ionic conductors10.1038/ncomms15893 ↗
29. Overall structural modification of a layered Ni-rich cathode for enhanced cycling stability and rate capability at high voltage10.1039/C8TA12494A ↗
30. Enhanced electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode at high cutoff voltage by modifying electrode/electrolyte interface with lithium metasilicate10.1016/j.electacta.2017.06.038 ↗
31. The enhanced electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials by low temperature fluorine substitution10.1016/j.electacta.2013.02.037 ↗
32. Electrochemistry and structural chemistry of LiNi02 (R3m) for 4 volt secondary lithium cells10.1149/1.2220730 ↗
33. Simultaneously dual modification of Ni-rich layered oxide cathode for high-energy lithium-ion batteries10.1002/adfm.201808825 ↗
34. Enhancing high-voltage performance of Ni-rich cathode by surface modification of self-assembled NASICON-fast ion conductor LiZr2(PO4)310.1021/acsami.9b00389 ↗
35. Electrochemical properties of LiNi1-yTiyO2 and LiNi0.975M0.025O2 (M = Zn, Al, and Ti) synthesized by the solid-state reaction method10.1016/j.materresbull.2012.01.003 ↗
36. Capacity fading of Ni-rich Li[NixCoyMn1-x-y]O2 (0.6≤x≤0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗
37. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗
38. Impact of microcrack generation and surface degradation on a nickel-rich layered LiNi0.9Co0.05Mn0.05O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b03268 ↗
39. Microstructural degradation of Ni-rich Li[NixCoyMn1-x-y]O2 cathodes during accelerated calendar aging10.1002/smll.201803179 ↗
40. Facile preparation of praseodymium oxide coated peanut-like lithium nickel cobalt manganese oxide microspheres for lithium ion batteries with high voltage capabilities10.1016/j.jallcom.2019.01.058 ↗
41. Hollow and hierarchical Li1.2Mn0.54Ni0.13Co0.13O2 micro-cubes as promising cathode materials for lithium ion battery10.1016/j.jallcom.2019.151686 ↗
42. In situ formed LiNi0.8Co0.15Al0.05O2@Li4SiO4 composite cathode material with high rate capability and long cycling stability for lithium-ion batteries10.1016/j.nanoen.2018.09.014 ↗
43. Graphene wrapped FeSe2 nano-microspheres with high pseudocapacitive contribution for enhanced Na-ion storage10.1002/aenm.201900356 ↗