journal article·2020-04

Preparation of Al2O3 coating on TiN coating by polymer-assisted deposition to improve oxidation resistance in coking inhibition applications

Xianlong Gong, Bo Wang, Huaizhi Han, Tao Kang, Quan Zhu, Jianli Wang, Xiangyuan Li

Ceramics International· Volume 46· Issue 6
Publisher page

Abstract

Abstract In order to inhibit the metal catalytic coking and improve oxidation resistance of single TiN coating, the TiN/Al2O3 double layer coatings were designed as a chemically inert coating for methylcyclohexane supercritical pyrolysis. Internal TiN coatings were prepared by atmospheric pressure chemical vapor deposition using TiCl4–H2–N2 system. The external Al2O3 coatings with different thicknesses were prepared on the TiN surface by polymer-assisted deposition, and the coating with the most suitable thickness was further annealed at different temperatures of 600, 700, 800 and 900 °C. The morphology, elemental and phase composition of TiN/Al2O3 coatings were characterized by SEM, EDX and XRD respectively. The chemical state information of the coating elements was based on Ti 2p, Al 2p core level X-ray photoelectron spectroscopy (XPS) spectra. The results indicated that the external Al2O3 coating will partially peel off at 900 °C annealing temperature. The thermogravimetric analysis results indicated that all TiN/Al2O3 coatings show better oxidation resistance than single-layer TiN coating. The anti-coking test with methylcyclohexane supercritical pyrolysis showed that the TiN/Al2O3 coatings can effectively cover the metal catalytic sites and eliminate metal catalytic coking. However, the acid sites of external Al2O3 coating slightly promoted coking, so the anti-coking ratios of TiN/Al2O3 coatings were smaller than that of TiN. Thus, the addition of external Al2O3 coating can greatly improve the oxidation resistance of TiN coatings with little loss of coking resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Heat transfer and supercritical fluids · Subcritical and Supercritical Water Processes · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Additives to prevent filamentous coke formation in endothermic heat exchangers
2. Atomic layer deposition of alumina passivation layers in high-aspect-ratio tubular reactors for coke suppression during thermal cracking of hydrocarbon fuels10.1021/ie5047818 ↗
3. Liquid fuels and propellants for aerospace propulsion: 1903-200310.2514/2.6946 ↗
4. Deposition of carbonaceous solids on different substrates from thermal stresssing of JP 8 and Jet A fuels10.1021/ie060968p ↗
5. Analysis of Carbonaceous solid deposits from thermal oxidative stressing of Jet-A fuel on Iron- and Nickel-based alloy surfaces10.1021/ie901283r ↗
6. Coke formation in the transfer line exchanger during steam cracking of hydrocarbons10.1021/ie900124z ↗
7. Surface deposition within treated and untreated stainless steel tubes resulting from thermal-oxidative and pyrolytic degradation of jet fuel10.1021/ef020180t ↗
8. Effect of aviation fuel type on pyrolytic reactivity and deposition propensity under supercritical conditions10.1021/ie200257b ↗
9. Preparation of rutile TiO2 coating by thermal chemical vapor deposition for anticoking applications10.1021/am5048762 ↗
10. Inhibition effect of APCVD titanium nitride coating on coke growth during n-hexane thermal cracking under supercritical conditions10.1021/ie401889p ↗
11. Preparation and anticoking performance of MOCVD alumina coatings for thermal cracking of hydrocarbon fuels under supercritical conditions10.1021/ie201978c ↗
12. Effects of aluminum concentration on the oxidation behaviors of reactively sputtered TiAlN films10.1111/j.1151-2916.1999.tb01819.x ↗
13. Cracking and delamination of metal organic vapour and deposited alumina and silica films10.1016/0921-5093(93)90352-F ↗
14. Growth and properties of alumina films obtained by low-pressure metal–organic chemical vapor deposition10.1016/S0040-6090(01)01300-1 ↗
15. The effect of thermal annealing on the adherence of Al2O3 films deposited by LP-MOCVD on several high alloy steels10.1163/156856197X00480 ↗
16. Raman spectroscopy studies on the thermal stability of TiN, CrN, TiAlN coatings and nanolayered TiN/CrN, TiAlN/CrN multilayer coatings10.1557/JMR.2004.0444 ↗
17. Design and characterization of novel wear resistant multilayer CVD coatings with improved adhesion between Al2O3 and Ti(C,N)10.1002/adem.201000130 ↗
18. Comparative studies of TiN and Ti1-x AlxN by plasma-assisted chemical vapor depositon using a TiCl4/AlCl3/N2/H2/Ar gas mixture10.1016/0040-6090(96)08766-4 ↗
19. Anti-oxidation properties of TiA1N film prepared by plasma-assisted chemical vapor deposition and roles of Al10.1016/S0040-6090(97)00212-5 ↗
20. Mechanical properties and oxidation behavior of Ti-Si-N films prepared by plasma-assisted CVD10.1002/(SICI)1521-3862(199912)5:6<275::AID-CVDE275>3.0.CO;2-J ↗
21. Polymer-assisted deposition of metal-oxide films10.1038/nmat1163 ↗
22. A chemical solution approach to epitaxial metal nitride thin films10.1002/adma.200801959 ↗
23. Epitaxial growth of Eu2O3 thin films on LaAlO3 substrates by polymer-assisted deposition10.1063/1.1806265 ↗
24. Polymer assisted deposition10.1039/B712910F ↗
25. Tungsten doped vanadium dioxide thin films prepared by atmospheric pressure chemical vapour deposition from vanadyl acetylacetonate and tungsten hexachloride10.1016/j.surfcoat.2007.03.026 ↗
26. Atmospheric pressure chemical vapor deposition of titanium nitride on metals10.1016/j.surfcoat.2005.02.171 ↗
27. Atmospheric pressure chemical vapor deposition mechanism of Al2O3 film from AlCl3 and O210.1016/j.jcrysgro.2008.11.061 ↗
28. Effects of current density, coating thickness, temperature, pH and particle concentration on internal stress during Ni–MoS2 electrocodeposition10.1179/1743294413Y.0000000223 ↗
29. Effect of FGM coating thickness on apparent fracture toughness of a thick-walled cylinder10.1016/j.engfracmech.2010.07.001 ↗
30. Relationship between coking behavior in hydrocarbon fuel pyrolysis and surface roughness10.1021/acs.energyfuels.7b03140 ↗
31. Thermal expansion behavior and macrostrain of Al2O3/Al composites with interpenetrating networks10.1016/S1359-6454(98)80033-5 ↗
32. Gitzen · 1970 · 141
33. Metastable alumina polymorphs crystal structures and transition sequences10.1111/j.1151-2916.1998.tb02581.x ↗
34. Influence of fluorine ion on the spinel synthesis10.1007/BF00724732 ↗
35. Determination of the distribution of species in supported metal catalysts by X-ray photoelectron spectroscopy10.1016/0021-9517(87)90101-1 ↗
36. Microstructure and elevated temperature tribological behavior of TiO2/Al2O3 composite ceramic coating formed by microarc oxidation of Ti6Al4V alloy10.1016/j.surfcoat.2015.03.044 ↗
37. Annealing studies of TiN films deposited by plasma-assisted CVD10.1016/S0257-8972(00)01138-5 ↗
38. Formation of coke in thermal cracking of jet fuel under supercritical conditions
39. Effect of potassium acetate on coke growth during light naphtha thermal cracking10.1021/ie2001549 ↗
40. Catalytic cracking of RP-3 jet fuel over wall-coated Pt/ZrO2–TiO2–Al2O3 catalysts with different Al2O3 ratios10.1016/j.jaap.2014.12.002 ↗
41. Impact of acidity in ZrO2-TiO2-Al2O3 composite oxides on the catalytic activity and coking behaviors during n-decane cracking10.1016/j.fuel.2018.06.011 ↗
42. Coking behaviors and kinetics on HZSM-5/SAPO-34 catalysts for conversion of ethanol to propylene10.1016/j.jechem.2016.02.001 ↗