Suitability of ceramic industrial waste recycling by alkaline activation for use as construction and restoration materials
Source abstract
Abstract
Ceramic is one of the prominent sources of waste in Europe. Its aluminosilicate composition, together with the relatively high amount of amorphous phase, makes it suitable as a potential precursor for alkali activated products. The technical characteristics of these kinds of materials, as well as the aesthetic appearance, determine a good applicability in the field of construction and for restoration purposes. This research aimed to investigate the suitability of ceramic industrial tiles waste through the alkaline activation process for the production of novel and eco-friendly materials. The applicative goal was the implementation of binder formulations to be used for the production of eco-sustainable bricks, tiles, mortars and decorative elements. The results showed that pure ceramic based geopolymers and binary mixtures obtained by adding few percentages of metakaolin can be produced at room temperature by only using sodium hydroxide and waterglass, reaching efficient technical characteristics for their employment in restoration. This work represents a starting point for future development of ceramic based geopolymeric products to be employed in construction and restoration field.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Potential use of brick waste as alternate concrete-making materials: a review10.1016/j.jclepro.2018.05.193 ↗
2. Alkaline activation of ceramic waste materials10.1007/s12649-013-9197-z ↗
3. Effect of alkali activator concentration and curing condition on strength and microstructure of waste clay brick powder-based geopolymer10.1016/j.compositesb.2017.10.013 ↗
4. Management and valorisation of wastes through use in producing alkali-activated cement materials10.1002/jctb.4927 ↗
5. The potential of using air jigging to sort recycled aggregates10.1016/j.jclepro.2013.11.057 ↗
6. Alternative cements based on alkali-activated red clay brick waste10.1016/j.conbuildmat.2016.10.023 ↗
7. Produção de geopolímeros à base de metacaulim e cerâmica vermelha10.1590/0366-69132018643712420 ↗
8. Chemical research and climate change as drivers in the commercial adoption of alkali activated materials10.1007/s12649-010-9015-9 ↗
9. Pachego-Torgal · 2014
10. Definizione, preparazione, proprietà ed applicazioni
11. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
12. Effect of synthesis parameters on the quality of construction and demolition wastes (CDW) geopolymers10.1016/j.apt.2014.11.012 ↗
13. Rheological properties and microstructure of binary waste red brick powder/metakaolin geopolymer10.1016/j.conbuildmat.2018.08.150 ↗
14. Synthesis and thermal behavior of geopolymer-type material from waste ceramic10.1016/j.conbuildmat.2013.08.063 ↗
15. Properties and microstructure of alkali-activated red clay brick waste10.1016/j.conbuildmat.2013.01.031 ↗
16. Ceramic wastes as raw materials in portland cement clinker fabrication: characterization and alkaline activation10.3989/mc.2006.v56.i281.94 ↗
17. Construction wastes as raw materials for geopolymer binders
18. Producción de elementos constructivos a partir de residuos de ladrillo activados alcalinamente10.19053/01211129.v25.n43.2016.5294 ↗
19. Alkali-activated binders and pozzolan cement binders – compete binder reaction or two sides of the same story
20. Geopolymer production for conservation-restoration using Sicilian raw materials: feasibility studies10.1088/1757-899X/777/1/012001 ↗
21. Alkali activation processes for incinerator residues management10.1016/j.wasman.2013.04.013 ↗
22. Alkali activated materials using pumice from the Aeolian Islands (Sicily, Italy) and their potentiality for cultural heritage applications: preliminary study10.1016/j.conbuildmat.2020.120391 ↗
23. Geopolymers as potential repair material in tiles conservation10.1007/s00339-016-9709-3 ↗
24. Geopolymers and polymers in the conservation of tile facades10.1016/j.conbuildmat.2018.11.058 ↗
25. Geopolymer composites for potential applications in cultural heritage
26. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
27. Assessment of geopolymers with Construction and Demolition Waste (CDW) aggregates as a building material10.1016/j.conbuildmat.2018.06.018 ↗
28. Quantitative determination of crystalline and amorphous phase in traditional ceramics by combined rietveld-RIR method10.4028/www.scientific.net/MSF.278-281.834 ↗
29. Profex: a graphical user interface for the Rietveld refinement program BGMN10.1107/S1600576715014685 ↗
30. IMA–CNMNC approved mineral symbols10.1180/mgm.2021.43 ↗
31. A short review of infra-red spectroscopic studies of geopolymers10.4028/www.scientific.net/AMR.1133.231 ↗
32. Ft-ir study, thermal analysis, and evaluation of the antibacterial activity of a mk-geopolymer mortar using glass waste as fine aggregate10.3390/polym13172970 ↗
33. Time-resolved and spatially-resolved infrared spectroscopic observation of seeded nucleation controlling geopolymer gel formation10.1016/j.jcis.2011.02.045 ↗
34. Attenuated total reflectance fourier transform infrared analysis of fly ash geopolymer gel aging10.1021/la700713g ↗
35. Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) as a potential on site tool to test geopolymerization reaction10.1016/j.talanta.2022.123721 ↗
36. The applications of new inorganic polymer for adsorption cadmium from waste water10.1007/s10904-019-01215-y ↗
37. Composition and microstructure of alkali activated fly ash binder: effect of the activator10.1016/j.cemconres.2005.03.003 ↗
38. The strength and microstructure of two geopolymers derived from metakaolin and red mud-fly ash admixture: a comparative study10.1016/j.conbuildmat.2011.12.011 ↗
39. Hybrid alkaline cements. Part I: fundamentals, rev. Rom
40. Immobilization forms of ZnO in the solidification/stabilization (S/S) of a zinc mine tailing through geopolymerization10.1016/j.jmrt.2019.09.040 ↗
41. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
42. Experimental study of Si–Al substitution in calcium-silicate-hydrate (C-S-H) prepared under equilibrium conditions10.1016/j.cemconres.2009.05.001 ↗
43. Variation in hybrid cements over time. Alkaline activation of fly ash-portland cement blends10.1016/j.cemconres.2013.03.022 ↗
44. Alkali activation of metakaolins: parameters affecting mechanical, structural and microstructural properties10.1007/s10853-006-0565-y ↗
45. Geopolymerisation: a review and prospects for the minerals industry10.1016/j.mineng.2007.07.011 ↗
46. Development of building material from geopolymerization of construction and demolition waste (CDW)10.1080/0371750X.2014.922429 ↗
47. 2008
48. Deere · 1966
49. Synthesis and mechanical properties of metakaolinite-based geopolymer10.1016/j.colsurfa.2005.01.016 ↗
50. Thermal, mechanical and microstructural analysis of metakaolin based geopolymers10.1590/1980-5373-mr-2018-0716 ↗
51. The role of mathematical modelling and gel chemistry in advancing geopolymer technology10.1205/cherd.04329 ↗
52. Efflorescence control in geopolymer binders based on natural pozzolan10.1016/j.cemconcomp.2011.07.007 ↗
53. Pacheco-Torgal · 2013
54. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation10.1016/j.cemconres.2004.10.042 ↗
55. Effect of calcium silicate sources on geopolymerisation10.1016/j.cemconres.2007.11.001 ↗
56. Synthesis of geopolymer composites from a mixture of volcanic scoria and metakaolin10.1016/j.jascer.2014.08.003 ↗
57. Efflorescence of alkali-activated cements (geopolymers) and the impacts on material structures: a critical analysis10.3389/fmats.2019.00089 ↗
58. Leonelli · 2013