Characteristics and thermal cycling behavior of plasma-sprayed Ba(Mg1/3Ta2/3)O3 thermal barrier coatings
Source abstract
Abstract
Abstract Ba(Mg 1/3 Ta 2/3 )O 3 (BMT) powders were synthesized by the solid state reaction method. BMT thermal barrier coatings (TBCs) were deposited by atmospheric plasma spraying (APS). The phase composition and microstructure of the BMT coatings were characterized. The thermal cycling behavior of the BMT coatings was investigated by the water quenching method from 1150 °C to room temperature. The results reveal that BMT powders have an ordered hexagonal perovskite structure, whereas the as-sprayed coating of BMT has a disordered cubic perovskite structure because of the different degree of structural order for different treatment conditions. During thermal cycling testing, the entire spalling of coatings occurred within the BMT coating near the bond coat. This is attributed to the following reasons: (1) the growth of a thermally grown oxides (TGO) layer, which leads to additional stresses in the coatings; (2) the coefficient of thermal expansion mismatch between the BMT coating and bond coat, which develops enormous stress in the coatings; (3) the precipitation of Ba 3 Ta 5 O 15 due to the evaporation of MgO during the spraying process, which changes the continuity of the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Thermal barrier coating materials10.1016/S1369-7021(05)70934-2 ↗
2. Plasma sprayed thermal barrier coatings: new materials, processing issues, and solutions10.1007/s11666-013-9889-8 ↗
3. Directions of the development of thermal barrier coatings in energy application10.1016/S0924-0136(99)00244-7 ↗
4. Thermal barrier coatings for more efficient gas turbine engines10.1557/mrs.2012.232 ↗
5. Thermal shock behavior of toughened gadolinium zirconate/YSZ double ceramic layered thermal barrier coating10.1016/j.jallcom.2014.01.060 ↗
6. New material concepts for the next generation of plasma sprayed thermal barrier coatings10.1007/s11666-004-0052-4 ↗
7. Rare earth zirconate ceramics with fluorite structure for thermal barrier coatings10.1111/j.1551-2916.2005.00667.x ↗
8. Zirconates as new materials for thermal barrier coatings10.1111/j.1151-2916.2000.tb01506.x ↗
9. Thermal cycling behavior and bonding strength of single ceramic layer Sm2Zr2O7 and double ceramic layer Sm2Zr2O7/8YSZ thermal barrier coatings deposited by atmospheric plasma spraying10.1016/j.ceramint.2016.05.062 ↗
10. New generation perovskite thermal barrier coating materials10.1007/s11666-008-9239-4 ↗
11. Perovskite type strontium zirconate as a new material for thermal barrier coatings10.1111/j.1551-2916.2008.02472.x ↗
12. Microstructure and thermal cycling behavior of air plasma sprayed YSZ/LaMgAl11O19 composite coatings10.1007/s11666-011-9683-4 ↗
13. Application of plasma sprayed complex perovskites as thermal barrier coatings10.1007/s11666-009-9302-9 ↗
14. Ba(Mg1/3Ta2/3)O3 single crystal fiber grown by the laser heated pedestal growth technique10.1063/1.357003 ↗
15. Yb2O3 and Gd2O3 doped strontium zirconate for thermal barrier coatings10.1016/j.jeurceramsoc.2008.05.013 ↗
16. Synthesis of Ba(Mg1/3Ta2/3)O3 microwave ceramics through a sol-gel route using acetate salts10.1111/j.1151-2916.2004.tb06363.x ↗
17. Thermophysical properties and thermal cycling behavior of plasma sprayed thick thermal barrier coatings10.1016/j.surfcoat.2004.02.004 ↗
18. A study of the microstructure and oxidation behavior of alumina/yttria-stabilized zirconia (Al2O3/YSZ) thermal barrier coatings10.1016/j.surfcoat.2012.09.052 ↗
19. Comparison of microstructure and mechanical properties of plasma-sprayed nanostructured and conventional yttria stabilized zirconia thermal barrier coatings10.1016/j.ceramint.2013.04.068 ↗
20. Hot corrosion, high temperature oxidation and thermal shock behavior of nanoagglomerated YSZ–Alumina composite coatings produced by plasma spray method10.1016/j.surfcoat.2013.01.038 ↗
21. Thermal cycling failure of new LaMgAl11O19/YSZ double ceramic top coat thermal barrier coating systems10.1016/j.surfcoat.2010.11.059 ↗
22. Thermal cycling behavior of La2Ce2O7/8YSZ double ceramic layer thermal barrier coatings prepared by atmospheric plasma spraying10.1016/j.surfcoat.2010.03.053 ↗
23. Cycling performance of a columnar structured complex perovskite in a temperature gradient test10.1007/s11666-015-0254-y ↗
24. Damage mechanisms, life prediction, and development of EB-PVD thermal barrier coatings for turbine airfoils10.1016/j.surfcoat.2007.06.067 ↗
25. Optimized functionally graded La2Zr2O7/8YSZ thermal barrier coatings fabricated by suspension plasma spraying10.1016/j.jallcom.2015.05.290 ↗