journal article·2013-09

Influence of Fe2O3 content on the dielectric behavior of aluminous porcelain insulators

Roger Honorato Piva, Paula Vilarinho, Márcio Raymundo Morelli, Márcio Antonio Fiori, Oscar Rubem Klegues Montedo

Ceramics International· Volume 39· Issue 7
Publisher page

Abstract

Abstract Due to the increasing availability of substitute materials for electrical porcelain, research is needed to adapt formulations involving these materials to the current economic realities of the industry. This study assessed the effect of iron oxide concentration (0, 1, 2, 3, 5, and 8 wt%) on the dielectric properties of an aluminous porcelain composition commonly employed for electrical insulation based on different values of temperature and frequency. Samples with iron oxide contents of 0, 3, and 5 wt% were analyzed using dilatometry, X-ray diffraction, and scanning electron microscopy to evaluate the thermal, structural, and microstructural changes related to their Fe2O3 concentrations. Both the dielectric constant (er) and the loss tangent (tan δ) were measured and evaluated in every sample. Results indicated that the presence of Fe2O3 increased the dielectric constant and loss tangent, which could result in an increase in heating by dielectric losses. Fe2O3 contents of up to 5 wt% had no significant effect on the performance of these insulators at room temperature (∼30 °C) and a high frequency (1 MHz), especially when the hematite phase was completely solubilized in the porcelain phases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Buchanan · 1986
2. Crystallization behavior and mechanical properties of porcelain bodies containing zinc oxide additions10.1016/j.jeurceramsoc.2004.06.009 ↗
3. X-ray diffraction microstructure analysis of mullite, quartz and corundum in porcelain insulators10.1016/j.jeurceramsoc.2004.05.019 ↗
4. The role of component dispersity and molding pressure in the manufacturing technology of electric porcelain10.1023/A:1027352119844 ↗
5. Material dependent dielectric breakdown model10.1016/j.commatsci.2007.08.020 ↗
6. Dielectric behaviour of porcelain in relation to constitution10.1016/S0272-8842(00)00029-8 ↗
7. Improving the microstructural and physical properties of alumina electrical porcelain with Cr2O3, MnO2 and ZnO additives10.1007/BF00365167 ↗
8. Influence of mixing on mullite formation in porcelains10.1016/S0955-2219(01)00274-6 ↗
9. Constitution of porcelain before and after heat-treatment. I: mineralogical composition10.1016/0955-2219(95)00072-3 ↗
10. Kingery · 1960
11. W. Schmidt, Materiais Elétricos, Isolantes e Magnéticos, segunda ed., Blucher, vol. 2, São Paulo, 1979.
12. Alumina-based electrical porcelain having improved dielectric properties