Characterization of mullite-Nd2O3 composite prepared through spark plasma sintering
Source abstract
Abstract
Abstract The present study investigated the microstructure and mechanical properties of spark plasma sintered mullite-Nd2O3 composite. 10 wt% Nd2O3 was added to the calcined mullite precursor using a simple mixing method after only 5 min of high energy milling in ethanol media and polyethylene cups. After that, two samples including mullite and mullite-Nd2O3 composite were spark plasma sintered at 1400 °C. The recorded XRD patterns demonstrated only mullite peaks in monolithic sample while Al2O3 and Nd2O3 peaks and dominant peaks of mullite in the case of mullite-Nd2O3 composite. FESEM micrographs and corresponding EDS elemental mapping investigations on the binary phase diagram and possible formed reaction products revealed the formation of Al2O3, SiO2, NdAlO5 and Nd2Si3O12 phases as eutectic reaction products. Nd2O3 improved the mechanical properties of mullite (bending strength of 461 ± 38 MPa, Vickers hardness of 16.25 ± 0.7 GPa and fracture toughness of 5.22 ± 0.14 MPa m1/2). Moreover, the spark plasma sintering process resulted in a nearly full density of both prepared samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Spinel-containing alumina-based refractory castables10.1016/j.ceramint.2011.03.049 ↗
2. Recent advances in silica-alumina refractory: a review10.1016/j.jascer.2014.03.001 ↗
3. Review of corrosion of refractory in gaseous environment10.1111/ijac.13418 ↗
4. A review: influence of refractories on steel quality10.1051/metal/2015028 ↗
5. Statistical analysis and multiobjective optimization of process parameters in plasma spraying of partially stabilized zirconia10.1007/s00170-014-6169-9 ↗
6. Comparison of spark plasma and microwave sintering of mullite based composite: mullite/Ta2O5 reaction10.1016/j.ceramint.2018.04.142 ↗
7. Comparison of spark plasma and microwave sintering of mullite based composite: mullite/Ta2O5 reaction10.1016/j.ceramint.2018.04.142 ↗
8. Structure and properties of mullite—a review10.1016/j.jeurceramsoc.2007.03.017 ↗
9. Review of mullite synthesis routes by sol–gel method10.1007/s10971-010-2222-9 ↗
10. Mullite: crystal structure and related properties10.1111/jace.13817 ↗
11. Schneider · 2006
12. Effect of fluorine-containing additive on the synthesis and sintering of compositions from natural raw materials in the “cordierite –mullite” system10.1016/j.ceramint.2019.02.079 ↗
13. Development of metal matrix composites and nanocomposites via double-pressing double-sintering (DPDS) method10.1016/j.mtcomm.2020.101245 ↗
14. The effects of metallic additives on the microstructure and mechanical properties of WC-Co cermets prepared by microwave sintering10.1016/j.ceramint.2020.08.093 ↗
15. Solgel-processed mullite coating-A review10.1111/ijac.12230 ↗
16. A review on synthesis of mullite ceramics from industrial wastes10.3390/recycling4030039 ↗
17. Alumina-mullite-zirconia composites obtained by reaction sintering: Part II R-curve behavior10.1023/A:1004765326780 ↗
18. Effect of high alumina cement on permeability and structure properties of ZrO2 composites10.1016/j.ceramint.2011.10.030 ↗
19. Effect of high alumina cement on permeability and structure properties of ZrO2 composites10.1016/j.ceramint.2011.10.030 ↗
20. Self-crack-healing behavior of mullite/SiC particle/SiC whisker multi-composites and potential use for ceramic springs10.1111/j.1551-2916.2005.00868.x ↗
21. Mechanical and microstructural characterization of mullite and mullite-SiC-whisker and ZrO2-toughened-mullite-SiC-whisker composites10.1111/j.1151-2916.1988.tb05902.x ↗
22. Phase and microstructure evolution in alkoxide-derived mullite/MgO-Partially-Stabilized zirconia10.1111/j.1151-2916.1995.tb08495.x ↗
23. Sintering and characterization of flyash-based mullite with MgO addition10.1016/j.jeurceramsoc.2010.12.012 ↗
24. Effect of heating method on microstructure and mechanical properties of zircon reinforced aluminum composites10.1590/1980-5373-mr-2016-0390 ↗
25. Characteristics of 3D mullite fibre reinforced silica rich mullite matrix composites fabricated by sol–gel process10.1179/1432891714Z.000000000730 ↗
26. Fabrication of mullite and mullite-matrix composites by transient viscous sintering of composite powders10.1111/j.1151-2916.1991.tb06780.x ↗
27. Oxide-Oxide composites
28. Pask · 1990
29. Rare earth elements: a review of applications, occurrence, exploration, analysis, recycling, and environmental impact10.1016/j.gsf.2018.12.005 ↗
30. Tailoring dielectric properties of cordierite-mullite ceramics through Ceramic Injection Moulding10.1016/j.mseb.2020.114783 ↗
31. Investigation on luminescent properties of rare earth doped mullite phosphors and the occupation site of the doped rare earths10.1149/2.0321909jes ↗
32. Abrupt change of dielectric properties in mullite due to titanium and strontium incorporation by sol-gel method10.1007/s40145-014-0119-8 ↗
33. Low temperature cofired ceramics
34. Effect of rare-earth oxide concentrate on reaction, densification and slag resistance of Al2O3- SiO2 ceramic refractories10.1016/0272-8842(94)90006-X ↗
35. Evaluation of the influence of MgO and La2O3 on the fast sintering of mullite10.1590/1516-1439.264814 ↗
36. Effect of Al and Mo addition on phase formation, mechanical and microstructure properties of spark plasma sintered iron alloy10.1016/j.mtcomm.2017.10.005 ↗
37. Co-reinforcing of mullite-TiN-CNT composites with ZrB2 and TiB2 compounds10.1016/j.ceramint.2019.07.072 ↗
38. Preparation of mullite-TiB2-CNTs hybrid composite through spark plasma sintering10.1016/j.ceramint.2019.05.154 ↗
39. A review of multi-physical fields induced phenomena and effects in spark plasma sintering: fundamentals and applications10.1016/j.matdes.2020.108662 ↗
40. Study of the potential effect of spark plasma sintering on the preparation of complex FGM/laminated WC-based cermet10.1016/j.ijrmhm.2020.105328 ↗
41. Ultra-low temperature fabrication of vanadium carbide reinforced aluminum nano composite through spark plasma sintering10.1016/j.jallcom.2018.04.239 ↗
42. Spark plasma sintering of mullite: relation between microstructure, properties and spark plasma sintering (SPS) parameters10.1016/j.ceramint.2015.01.078 ↗
43. Densification, microstructure and mechanical properties of Mullite-TiC composites prepared by spark plasma sintering10.1016/j.ceramint.2014.07.146 ↗
44. Densification, phase transformation and hardness of mullite-cubic BN composites prepared by spark plasma sintering10.2109/jcersj2.118.157 ↗
45. Preparation mullite/Si3N4 composites by reaction spark plasma sintering and their characterization10.1016/j.ceramint.2018.11.237 ↗
46. Preparation of mullite/B4C composites: a comparative study on the effect of heating methods10.1016/j.ceramint.2018.07.104 ↗
47. Unexpected SiC nanowires growth during spark plasma sintering of WC-10Si: a comparative study on phase formation and microstructure properties against WC-10Co cermet10.1016/j.jallcom.2019.02.059 ↗
48. Evaluation ofK Ic of brittle solids by the indentation method with low crack-to-indent ratios10.1007/BF00724706 ↗
49. Phase equilibrium in the system Nd2O3—SiO210.1111/j.1151-2916.1964.tb13132.x ↗
50. The Al2O3‐Nd2O3 phase diagram10.1111/j.1151-2916.1985.tb09645.x ↗