Single-step combustion synthesis of LaAlO3 powders and their sintering behavior
Source abstract
Abstract
Abstract Single-phase LaAlO 3 was prepared by a simple combustion synthesis procedure, which relies on using urea and β-alanine fuel mixture, instead of a single fuel. The aqueous solution of La(NO 3 ) 3 , Al(NO 3 ) 3 , urea and β-alanine underwent a strong exothermic reaction at 281 °C, thus enabling the formation of single-phase LaAlO 3 directly from the combustion reaction—without the need of supplementary annealing. The combustion synthesized LaAlO 3 had an average crystallite size of 46 nm and a BET surface area of 3.0 m 2 /g. The addition of NaCl to the reaction mixture decreased the combustion temperature, promoting an increase of the BET surface area (8.5 m 2 /g). At the same time the LaAlO 3 crystallite size decreased to 36 nm. After sintering at 1500 °C for 5 h, LaAlO 3 pellets developed a fine microstructure, reaching 94% of the theoretical density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Electronic and Structural Properties of Oxides · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Low-temperature chemical synthesis of lanthanum monoaluminate10.1111/j.1151-2916.1997.tb02801.x ↗
2. LaAlO3 thin films deposited on Si(100) and MgO(100) substrates10.1016/S0167-2738(97)84030-1 ↗
3. Preparation of high Jc YBCO films on LAO by spray pyrolysis process using nitrate precursors10.1016/j.physc.2007.04.246 ↗
4. Electrical conductivity of Sr and Mg doped LaAlO310.1016/S0167-2738(02)00510-6 ↗
5. Synthesis and luminescence properties of Eu3+-doped LaAlO3 nanocrystals10.1016/j.jallcom.2005.01.086 ↗
6. Spectroscopic characterization of LaAlO3 crystal doped with Er3+ ions10.1016/j.optmat.2005.12.006 ↗
7. Effect of sol–gel modifications on formation and morphology of nanocrystalline lanthanum aluminate10.1016/j.materresbull.2006.04.025 ↗
8. Conductivity of A- and B-site doped LaAlO3, LaGaO3, LaScO3 and LaInO3 perovskites10.1016/S0167-2738(99)00337-9 ↗
9. Low temperature synthesis of spherical lanthanum aluminate nanoparticles10.1016/j.matlet.2004.07.020 ↗
10. Oxidative coupling of methane on LaAlO3 perovskites partially substituted with alkali or alkali-earth ions10.1016/S1381-1169(01)00265-5 ↗
11. Low temperature powder synthesis of LaAlO3 through in situ polymerization route utilizing citric acid and ethylene glycol10.1016/S0925-8388(97)00445-3 ↗
12. Structural properties of Pd catalysts supported on Al2O3–La2O3 prepared by sol–gel method10.1016/S0926-3373(98)00010-1 ↗
13. Processing and characterization of sol–gel fabricated mixed metal aluminates10.1016/j.ceramint.2004.11.012 ↗
14. Colouring mechanism of red ceramic pigments based on perovskite structure10.4028/www.scientific.net/KEM.264-268.1549 ↗
15. Low temperature synthesis of nanocrystalline lanthanum monoaluminate powders by chemical coprecipitation10.1016/j.jallcom.2006.09.063 ↗
16. Low temperature synthesis of microwave dielectric LaAlO3 nanoparticles: effect of chloride on phase evolution and morphology10.1016/j.ceramint.2003.12.075 ↗
17. Synthesizing nano LaAlO3 powders via coprecipitation method10.1016/S0167-577X(03)00502-0 ↗
18. Synthesis of lanthanum aluminate via the ethylenediaminetetraacetic acid gel route10.1016/S0272-8842(03)00026-9 ↗
19. Synthesis of LaAlO3 via ethylenediaminetetraacetic acid precursor10.1016/j.matchemphys.2003.09.036 ↗
20. Synthesis and characterization of lanthanum aluminate powder at relatively low temperature10.1016/S0167-577X(96)00207-8 ↗
21. Molten salt synthesis of LaAlO3 powder at low temperatures10.1016/j.jeurceramsoc.2007.01.008 ↗
22. Combustion synthesis: an update10.1016/S1359-0286(02)00123-7 ↗
23. Combustion synthesis and characterization of nanocrystalline LaAlO3 powders10.1016/j.matchemphys.2007.05.027 ↗
24. Combustion synthesis and photoluminescence of Eu3+ doped LaAlO3 nanophosphor10.1016/j.optmat.2012.04.003 ↗